DRG
-
Posts
95 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by DRG
-
This advert is COMPLETED!
- For sale
- Used
Tokyo Marui FN Five-seveN This is my Five-seveN that i’ve owned for around a year. Build spec is as followed: Guarder upper Guarder lower Maple leaf crazy jet inner barrel Maple leaf black outer barrel PDI 70° hop rubber AIP 140% Hi Capa nozzle spring Comes with 2 magazines that have had new feed lips and gas routers. Also comes with a spare gas router, 2 nozzle springs and a 150% hammer spring. A slight noise is present when pulling the slide back due to the non standard nozzle spring (original killed itself) but it doesn’t affect used and functions perfectly fine. Looking for £140 posted but open to offers. Total build cost is around £300. Happy to answer any questions and send more photos.£140
-
This advert is COMPLETED!
- For sale
- Used
G&G F2000 ETU This is my F2000 that i’ve owned a little over 2 years. The build spec is as followed: Perun ETU++ SHS 13:1 Gears SHS 16 TPA motor FPS Softair Piston Head FPS Softair Piston FPS Softair Cylinder FPS Softair AUG Nozzle ZCI 6.02 Inner Barrel Maple Leaf Macaron 60° + Omega Nub Madbull M100 Spring G&G F2000 Brass Cylinder Head G&G F2000 Metal Tri Rail The flash hider and front sling mount are showing a little surface rust. Half of the hop window mount has snapped (common issue) but it doesn’t stop the hop window being mounted. It fires nicely at around 1J, with great trigger response. Full auto is currently set to 2 round burst. It will come with a set of 5 G&G polymer 120 round midcaps, with only one ever being used (to test function). It will also come with a plethora of spares: 1x tappet plate 2x cylinder heads 2x tappet springs 1x mag release spring 1x trigger spring 1x buttpad 1x microswitch 1x original handguard I’m looking for £300 posted as I need the space. The last one I sold went for £300 with no magazines, no spares and a less impressive build spec. The total build cost is north of £800. Happy to provide more pictures or answer any questions.£300
-
This advert is COMPLETED!
- For sale
- Used
CYMA CM077 Zhukov Fires at around 1J ZCI 6.02, PDI 70° and Omega nub Comes with 2 high capacity magazines Looking for £150 posted£150
-
This advert is COMPLETED!
- For sale
- Used
MWS Parts CQBR outer barrel with barrel nut, gas tube, front sight post and flash hider. Comes with standard M4A1 handguards which are quite tight so i’ve left them removed. £30 posted Angry Gun 2 position buffer tube with castle nut, end plate and fiberlite stock. £30 posted£30
-
This advert is COMPLETED!
- For sale
- As new
Novritsch SSR90 This is my Novritsch SSR90 that i’ve owned for about 3 weeks. It was an impulse purchase from a friend as I’ve always wanted a P90. Has had a microswitch replacement by my friend who is a P90 specialist as the original one was broken from new (thanks Novritsch). Fires lovely on a 7.4v and is all standard apart from the microswitch (Perun stickers are on there as I’m a hater). Comes with a couple rail segments and 2 King Arms 100 round Midcaps. Essentially a fully loaded P90. Looking for £200 posted. Open to offers and happy to take any pictures.£200
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Tokyo Marui FN Five-seveN This is my Five-seveN that i’ve owned for around a year. Build spec is as followed: Guarder upper Guarder lower Maple leaf crazy jet inner barrel Maple leaf black outer barrel PDI 70° hop rubber AIP 140% Hi Capa nozzle spring Comes with 2 magazines which may want feed lips at some point down the line but do their job. Also comes with a spare gas router, 2 nozzle springs and a 150% hammer spring. A slight noise is present when pulling the slide back due to the non standard nozzle spring (original killed itself) but it doesn’t affect use and functions perfectly fine. Looking for £175 posted but open to offers. Total build cost is around £300. Happy to answer any questions and send more photos.£175
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
G&G F2000 ETU This is my F2000 that i’ve owned a little over 2 years. The build spec is as followed: Perun ETU++ SHS 13:1 Gears SHS 16 TPA motor FPS Softair Piston Head FPS Softair Piston FPS Softair Cylinder FPS Softair AUG Nozzle ZCI 6.02 Inner Barrel Maple Leaf Macaron 60° + Omega Nub Madbull M100 Spring G&G F2000 Brass Cylinder Head G&G F2000 Metal Tri Rail The flash hider and front sling mount are showing a little surface rust. Half of the hop window mount has snapped (common issue) but it doesn’t stop the hop window being mounted. It fires nicely at around 1J, with great trigger response. Full auto is currently set to 2 round burst. It will come with a set of 5 G&G polymer 120 round midcaps, with only one ever being used (to test function). It will also come with a plethora of spares: 1x tappet plate 2x cylinder heads 2x tappet springs 1x mag release spring 1x trigger spring 1x buttpad 1x microswitch 1x original handguard I’m looking for £400 posted, but I am open to offers. The last one I sold went for £300 with no magazines, no spares and a less impressive build spec. The total build cost is north of £800. Happy to provide more pictures or answer any questions.£400
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
NCSTAR VISM LIO 4x34 slight surface rust on the backup irons and hardware, but has only been used as a display piece. also has LEDs at the front for some reason, these are untested as i’ve never had a reason to use them. glass is nice and clear. looking for £50 posted£50
-
I’d like to know why you sold me something almost a month ago and haven’t posted it out yet? Along with ignoring my messages despite being online.
-
This advert is COMPLETED!
- For sale
- Used
A&K Vector Bought this for my little brother, it chrono’d at 0.95J when last tested Since being tested a few months back, it promptly sat in storage and hasn’t been used since I have no batteries to test it, but it last worked nicely and it wasn’t that long ago Boneyard as I cannot test it’s function, and therefore cannot offer any guarantees on it. Looking for £100 posted on it, comes with a tan foregrip and 3 hi cap magazines.£100
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
leviathan evo, removed from an evo in good working condition £70 posted SR25 upgrade kit M130 spring brand new in packaging SHS 19 tooth piston brand new in packaging 18:1 ZCI SR25 gears £15 posted ASG Boost 30k motors with neo magnets, tested and in good working condition £25 posted each APS CAM870 MK II bolt boneyard as it is missing the cradle these are around £80 new looking for £30 posted G&G CM16 receiver, gearbox shell and stock happy to include some internals if the buyer requires them £40 postedNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
E&C geissele 416 needs: trigger switch and wiring, mock bolt catch pin, hop rubber and nub has a zci 6.02mm tight bore and generic rotary hop up included. comes with rails that screw onto the handguard. comes with 1 ICS metal high cap magazine. looking for £120 posted£120
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
CYMA Zhukov fires at 310 fps on .25g bb stock is showing signs of two tone but is majority black handguard supposedly has a crack underneath the tape but i haven’t removed it missing rear sight comes with 1 hi cap magazine looking for £120 posted£120
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
LCT AIM receiver Seen little use, small scratch from the fire selector £60 posted£60
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Vector Optics 3x26 magnifier Works perfectly £40 posted£40
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
G&G M16A2 built from a carry handle G&G M4 with C7A1 furniture rear wired to deans has a ZCI inner barrel shoots at about 0.4J so has an air leak, not too sure where it’s coming from but i know the hop unit is missing the spring to keep it tensioned against the gearbox. comes with one metal ics stanag hi cap. looking for £100 posted£100
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
it’s with a heavy heart i have to sell these, but an unexpected fine forces me to. ARES L1A1 comes with 7 midcaps comes with both the smooth top cover and railed top cover internally it’s stock, externally i have replaced the mag release pin with a bolt and nut from an F2000 handguard. shooting at 1.4J Looking for £450 posted on it£450
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
RWA KG9 needs a new hop unit piston and gears don’t mesh together properly, i do have a couple replacement pistons though comes with 4 midcap magazines, 2 LiPos, two extra pistons and an extra spring. has the original box looking for £125 posted£125
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
golden eagle full metal mcr lmg around 320fps on a .2g bb prowin hop unit has 2 drum magazines, 1 is wired to a nimh and works, other takes AA batteries and is brand new but haven’t tested it looking for £175 posted£175
-
This advert is COMPLETED!
- For sale
- As new
MP5 torch handguard looking for £35 posted£35
-
This advert is COMPLETED!
- For sale
- As new
ICS MP5 magazines (will also fit G&G and tokyo marui) two metal ones in green: £12 posted 3 polymer ones in black: £18 posted£30
-
This advert is COMPLETED!
- For sale
- Used
G&G RK104 has a perun etu to replace the awful G&G one original owner snapped the stock mounts on the receiver so i ordered a new one from G&G, the one they sent me is a newer design and requires some filing/dremeling to fit the old stock adapter on there. gun still works fine but doesn’t have the buffer tube attached due to this. looking for £175 posted£175
-
This advert is COMPLETED!
- For sale
- Used
ICS M4 with colt trademarks full metal with tokyo marui KAC rail needs: trigger switch and wiring set, new buffer tube if you’d like it to be rear wired and hop up c clip. one of the front sight pins is a little loose safety works, rotary hop up works, trigger works, gears turn and a motor is there but i can’t test that due to having no wiring set for it. sold as seen looking for £70 posted£70
-
This advert is COMPLETED!
- For sale
- Used
Top: Lightweight aluminium free float rail and barrel nut with outer barrel: £35 From left to right in the middle: King arms gearbox, needs a new wiring set and spring for the selector plate. Complete with gears and compression set. Couple gearbox screws are rounded from a previous owner. SOLD Lonex gearbox shell, previous owner removed some material from the front so a safety switch cannot be installed properly. Would benefit a build with a mosfet as they’ll use an electronic safety. SOLD G&P gearbox shell, nothing wrong with it just surplus to needs. SOLD Bottom: Cyma short stock, brand new never used. £15 All prices include postageNO VALUE SPECIFIED
