DRG
-
Posts
73 -
Joined
-
Last visited
-
Feedback
100%
DRG's Achievements
-
@EDcase 1) Japanese manufacturers can't make airsoft handguns with metallic pressure bearing parts (slide, barrel, revolver frame and cylinder) 2) If plastic slides bother you that much, metal kits do exist
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Angry Gun M16A2 MWS receiver set Comes with: Forward assist Buffer lock Trigger guard A2 rear sight assembly Dust cover Receiver pins Small piece of plastic to ensure smooth feeding Has a few marks but nothing major. Looking for £425 posted£425
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
MWS magazines, new in packaging £45 each posted£45
-
This advert is COMPLETED!
- For sale
- Used
Double Bell XM177 Built with a Gate Aster, 13:1 gears and Neo motor. Has a ZCI tightbore barrel, G&G green hop rubber and rotary hop chamber. Was shooting around 0.9J last time I checked, now it doesn’t seem to feed but that’s only since I changed the hop chamber. Changed the handguards for slim ones to make it clone accurate. Will come with a new set of gearbox screws. looking for £120 posted£120
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
CYMA M16A1 front end complete with hop chamber and inner barrel. All that’s needed is a barrel nut assembly. Looking for £30 posted Gas tight MWS Stanag Looking for £35 posted Angry Gun 2 position buffer tube with fiberlite stock for MWS Looking for £25 posted Fiberlite stock with stock pad Looking for £15 posted£30
-
This advert is COMPLETED!
- For sale
- Used
ICS L85A2 I bought this with the intention of getting it back up and running. It’s had an entirely new wiring set, a cyma blue edition motor and new hop chamber. I did have it firing at 0.9J and then opened the gearbox to try and sort the shimming. The motor now just spins which leads me to believe I have done the opposite of what I was meant to do. The flash hider was missing when I purchased it so I threw on a barrel extension. Comes with 2 metal flash mags and a ghetto ass susat which reminds me of practical work in secondary school with a microscope. Looking for £125 posted, it owes me more than that but I’d like it out of the way.£125
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Tokyo Marui FN Five-seveN This is my Five-seveN that i’ve owned for around a year. Build spec is as followed: Guarder upper Guarder lower Maple leaf crazy jet inner barrel Maple leaf black outer barrel PDI 70° hop rubber AIP 140% Hi Capa nozzle spring Comes with 2 magazines that have had new feed lips and gas routers. Also comes with a spare gas router, 2 nozzle springs and a 150% hammer spring. A slight noise is present when pulling the slide back due to the non standard nozzle spring (original killed itself) but it doesn’t affect used and functions perfectly fine. Looking for £140 posted but open to offers. Total build cost is around £300. Happy to answer any questions and send more photos.£140
-
This advert is COMPLETED!
- For sale
- Used
G&G F2000 ETU This is my F2000 that i’ve owned a little over 2 years. The build spec is as followed: Perun ETU++ SHS 13:1 Gears SHS 16 TPA motor FPS Softair Piston Head FPS Softair Piston FPS Softair Cylinder FPS Softair AUG Nozzle ZCI 6.02 Inner Barrel Maple Leaf Macaron 60° + Omega Nub Madbull M100 Spring G&G F2000 Brass Cylinder Head G&G F2000 Metal Tri Rail The flash hider and front sling mount are showing a little surface rust. Half of the hop window mount has snapped (common issue) but it doesn’t stop the hop window being mounted. It fires nicely at around 1J, with great trigger response. Full auto is currently set to 2 round burst. It will come with a set of 5 G&G polymer 120 round midcaps, with only one ever being used (to test function). It will also come with a plethora of spares: 1x tappet plate 2x cylinder heads 2x tappet springs 1x mag release spring 1x trigger spring 1x buttpad 1x microswitch 1x original handguard I’m looking for £300 posted as I need the space. The last one I sold went for £300 with no magazines, no spares and a less impressive build spec. The total build cost is north of £800. Happy to provide more pictures or answer any questions.£300
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
CYMA CM077 Zhukov Fires at around 1J ZCI 6.02, PDI 70° and Omega nub Comes with 2 high capacity magazines Looking for £150 posted£150
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
MWS Parts CQBR outer barrel with barrel nut, gas tube, front sight post and flash hider. Comes with standard M4A1 handguards which are quite tight so i’ve left them removed. £30 posted Angry Gun 2 position buffer tube with castle nut, end plate and fiberlite stock. £30 posted£30
-
This advert is COMPLETED!
- For sale
- As new
Novritsch SSR90 This is my Novritsch SSR90 that i’ve owned for about 3 weeks. It was an impulse purchase from a friend as I’ve always wanted a P90. Has had a microswitch replacement by my friend who is a P90 specialist as the original one was broken from new (thanks Novritsch). Fires lovely on a 7.4v and is all standard apart from the microswitch (Perun stickers are on there as I’m a hater). Comes with a couple rail segments and 2 King Arms 100 round Midcaps. Essentially a fully loaded P90. Looking for £200 posted. Open to offers and happy to take any pictures.£200
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Tokyo Marui FN Five-seveN This is my Five-seveN that i’ve owned for around a year. Build spec is as followed: Guarder upper Guarder lower Maple leaf crazy jet inner barrel Maple leaf black outer barrel PDI 70° hop rubber AIP 140% Hi Capa nozzle spring Comes with 2 magazines which may want feed lips at some point down the line but do their job. Also comes with a spare gas router, 2 nozzle springs and a 150% hammer spring. A slight noise is present when pulling the slide back due to the non standard nozzle spring (original killed itself) but it doesn’t affect use and functions perfectly fine. Looking for £175 posted but open to offers. Total build cost is around £300. Happy to answer any questions and send more photos.£175
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
G&G F2000 ETU This is my F2000 that i’ve owned a little over 2 years. The build spec is as followed: Perun ETU++ SHS 13:1 Gears SHS 16 TPA motor FPS Softair Piston Head FPS Softair Piston FPS Softair Cylinder FPS Softair AUG Nozzle ZCI 6.02 Inner Barrel Maple Leaf Macaron 60° + Omega Nub Madbull M100 Spring G&G F2000 Brass Cylinder Head G&G F2000 Metal Tri Rail The flash hider and front sling mount are showing a little surface rust. Half of the hop window mount has snapped (common issue) but it doesn’t stop the hop window being mounted. It fires nicely at around 1J, with great trigger response. Full auto is currently set to 2 round burst. It will come with a set of 5 G&G polymer 120 round midcaps, with only one ever being used (to test function). It will also come with a plethora of spares: 1x tappet plate 2x cylinder heads 2x tappet springs 1x mag release spring 1x trigger spring 1x buttpad 1x microswitch 1x original handguard I’m looking for £400 posted, but I am open to offers. The last one I sold went for £300 with no magazines, no spares and a less impressive build spec. The total build cost is north of £800. Happy to provide more pictures or answer any questions.£400
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
NCSTAR VISM LIO 4x34 slight surface rust on the backup irons and hardware, but has only been used as a display piece. also has LEDs at the front for some reason, these are untested as i’ve never had a reason to use them. glass is nice and clear. looking for £50 posted£50
-
ak2m4 reacted to a reply to a status update:
I’d like to know why you sold me something almost a month ago and haven’t posted it o
-
Galvatron reacted to a reply to a status update:
I’d like to know why you sold me something almost a month ago and haven’t posted it o
-
Rogerborg reacted to a reply to a status update:
I’d like to know why you sold me something almost a month ago and haven’t posted it o
-
DanBow reacted to a reply to a status update:
I’d like to know why you sold me something almost a month ago and haven’t posted it o
-
I’d like to know why you sold me something almost a month ago and haven’t posted it out yet? Along with ignoring my messages despite being online.
