SerialNoodle
-
Posts
100 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by SerialNoodle
-
-
On 25/04/2024 at 19:41, Owen82636 said:
Rifle but potentially an smg and around £230-£240 maximum and would use very often
With that budget, the best I could suggest is trying to find a WE G36. They're relatively cheap, often around £200 and they're relatively reliable and perform decently.
There is also the AA R36 (which is a clone of the WE) for £220 and they're normally readily available, plus they come with 2 mags, however, they are a bit cheap quality wise.
An SMG setup *may* be a little cheaper. If you're lucky to find a decent one second hand, KWA MP9's are decent guns which sell for £250ish normally, however, they are prone to breakdowns which are normally common so unless you know what's going on with 'em, don't get one. (the VORSK VMP1 seems like a nice alternative though I have no experience on them so I can't comment).
Other than that, a gen 2 VFC or a TM MP7 would be the safer bet.
You will be hard pressed to find anything for £240 that is decent enough to last, and leaves enough room to buy magazines and gas. It's best to save up and buy yourself something nice like a MWS or a Gen 2/3 VFC AR/416 (or the aforementioned SMG's) and get a few more mags with them.
-
1 minute ago, RostokMcSpoons said:
It's definitely this, isn't it?
Sounds like something RWA would call "the best" lol
-
Vector optics are a good idea if you're not too happy about splashing out a fair chunk of cash on the ones mentioned above me.
They're good value for money, their warranties are a bit on the short side (5 years or so), however I'd stick them on par regarding quality and battery life with Vortex. My little Vector Maverick 1x22 MIL has been going good for the better part of a year on the same battery that I originally had, with mostly consistent use. Some vectors also come with a les protector so you're pretty much covered. If not, it's always good to buy a plastic rail one or one that can fit onto the optic. -
2 hours ago, RostokMcSpoons said:
Hiya!
Special Ops nr Olney / Milton Keynes are building a CQB environment right now (and are still planning on re-opening their woodland site)
I'm also trying to convince the guys at skirmish to play more CQB games in the village arena lol
-
Hello fellow Skirmish Central-goer!
-
-
Hey guys, just need a little help.
When I put some air in my HPA tank (from empty), the pressure needle on my Balystik regulator will go past its normal operating pressure and creep up to the red zone, then starts slowly venting air out of the small vent hole in the side.
When I put my line into the regulator, the pressure goes down to 110 psi (normal operating pressure) then slowly creeps up. Same happens when it's plugged into a gun.
Everything looks fine, my o-rings aren't dry or damaged and there's no debris from what I can see. Any help would be appreciated. Thanks! -
Here's some ones I use:
Vorsk
ASG
Geoff
Infinity
Infinities and Geoff's are the best ones I've used, slightly more expensive. Vorsk are good and cheap though, they come in bulk buy deals a lot.
-
I've had experience with them so I can lend a hand.
You're slightly correct with Arcturus. Whilst they have proprietary Electronic Trigger Unit, it's still a regular V2 gearbox, so upgrades are fine for the most part. Arcturus externals and qualities are also excellent from my experience.
E&C is essentially just as good as Arcturus, slightly better perhaps. I like that they have trademarks, plus they don't have proprietary ETUs, so upgrades are fine.
Not quite sure about Double Bell, from what I've heard, their quality isn't outstanding.
Specna Arms are decent, their externals are surprisingly nice, they do sound a bit whiney out of the box however. Internals are fine for upgrades as well.
Because it was also mentioned, VFC and TM. Expensive but the external quality and detailing is the best out of all. Internals will last if you don't touch them but are incredibly annoying and finicky if you don't really know what you're doing.
Overall, I'd probably suggest E&C. They have very good quality, and they're good for upgrades.
Hope this helps
-
Sear is worn or broken it seems, had a similar issue when I had a WE Glock. It's probably easier and less annoying to buy a new hammer assembly if you can find one.
-
Yeah it's a bummer, it's more of a collector piece or milsim training gun than anything, as it's rather subpar for general airsoft use. Steel slide kits do exist, though it's favourable to put them on a base like a WE for upgradeability and performance sake.
-
They aren't the best, especially for the price they come at.
The main issue is that whilst they are built of steel, they also still have some poor QC in some areas. To add, they don't really perform that well in both range/accuracy and efficiency, parts are proprietary and also hard to source.
If you want a glock, it's probably better to buy WE, TM, VFC or KJW, as they offer way better performance, part availability and upgradeability for 1/3rd of the price, of course with the expense of losing the better feel a GHK would provide.
-
Ignore what I said- misread the gun name
-
-
I had this for my first gun a few years ago. It was an absolutely lovely gun. The quality was decent, and the performance out of the box was great.
My only issues was one of the 2 mags included broke (it was a flash mag, the cord broke on me) and also the pin that holds the stock in place along the buffer tube is a bit weak. Mine broke but I was a bit rough on it.
Lastly it shot a little bit too hot out of the box as well (around 380fps). Thanks to the semi quick change spring, you don't need to take apart the entire gearbox to change the spring.
Overall, it was a very nice gun worth buying.
-
There's nothing to talk you out from it XD
-
It's normally the best to take it apart and have a little mess around after each game day when using a GBBR, as said above, lube application doesn't need to be that frequent but it's nice to keep on top of it. Just also be careful when cleaning the barrel, try not to use anything that may damage the inside, and don't apply anything to that, same applies to the hop unit generally too.
On a side note, also try to keep some gas in the magazines when you store it, keeps the mags gas tight and keeps the seals lubed. I have a small bottle of Abbey maintenance gas that I use to fill the magazines of my GBBP when they're in storage. It's also good to shoot the gun using that gas every now and then just to keep the deep internals good too.
Enjoy the MP7.
-
Lovely 😍
On 22/06/2022 at 20:31, Davegolf said:@SerialNoodle what is that rifle? Looks epic! Isn’t it already 9mm?
'Tis actually a TM Type 89 GBBR. It runs on a 5.56 magazine though I'm getting a fancy 9mm HPA conversion made for it.
-
Bolt actions are limited to 500FPS on 0.2g. If you have a look at a joule chart, you'll see that your gun is slightly over the limit, by about 20fps. I'd suggest using a slightly weaker spring.
-
My mini PP2K project is complete, time to focus on this bad boy! - 9mm conversion possibly coming soon :0 (If it actually works). What else should be added to her? -
I recently came back from Poland with a RIF successfully.
There are some things you shall have to consider, mainly that being the airline, where you're going to/coming from and who you ask.
Some Airlines have a strictly no RIF policy, some allow them, some charge fees for transportation.
What is normally requested is that the RIF is inside a hard case, which is securely locked. The RIF must not have the magazine inserted, nor should neither the RIF or magazine be loaded. I normally slightly disassemble my guns too. If you want to ask about it, don't ask the baggage people. It's always better to ask the security or put it through nothing to declare. Should they need to check it, allow them. They may ask more questions after you've passed the security point however you shouldn't normally be questioned- it depends entirely on who you go to and where you are.
That's about it.- Dan Robinson and Sebza
-
2
-
Something rather unique at least...
Something rather unique at least...
Which MP7?
in Gas Guns
Posted · Edited by SerialNoodle
I'll now bore you to death, though, I've a fair bit of experience with GBB MP7 brands (minus KWA).
VFC - You should only really stick to the Gen2 (most if not all retailers stock them now unless you get shafted in a dodgy sale). It's full scale with all the proper trades to make people like me happy and it performs very nicely out of the box. It can mag-dump on auto however don't expect the best when its colder.
The internals are relatively straight forward and they're fine longevity wise as long as you don't abuse them. There is also the infamous "rear plate crack", as to which seems the only common problem so far, however, VFC sell replacements and aftermarket aluminium ones are available, though, as long as you stick to propane all year long it shouldn't give you any grief.
My only personal dislikes are the rather sloppy controls (whilst all MP7's are mushy this one seems to be worse) and the hop unit is very twitchy when using lower weight BB's, though it may be a me problem. The magazine baseplates (and the nub on the follower that keeps it in place) are also incredibly flimsy so try not to drop them. If you do end up breaking a nub, you can drill a small 2mm hole and insert a 2.5mm plug (can just be ground flat) tap into it, then add a small M2.5mm grub screw into it (ideally with some Green Loctite).
Tokyo Marui - The TM is pretty much one of the all timers in terms of GBB SMG's. Whilst it comes with the correct trading, it is 8% smaller than the VFC (or its real counterpart). I don't mind it as it makes it just a little more tactile and the magazines fit in my pouches easier, however, people with large hands and gloves may struggle slightly. Performance wise, its more than likely the best you'll ever get as its punchy, has a decent range and accuracy and it will pretty much auto mag-dump any time of the year.
Internally, there is the infamous "inside shell crack". This can be prevented by using the sling swivel (which absorbs and dissipates energy from the bolt) and keeping the gas on propane or 144a- my one went on for over 2 years with little sign of wear/damage.
If you get it, you will more than likely notice it as the gun with either become very unpredictable when it fires, or just stop working completely, and there's not much you can do about it. There's no spares and no real way to repair it. I also noticed that the bolt catch would only work with the stock collapsed after about a year.
My personal dislikes don't go too far with it, I'm not a fan of the reverse bolt release and the weight as to which is can hop is quite limited (about a 0.28g) max. The piston cup would also swell a lot, causing jams. There were suggestions to just dump a load of silicone oil into it, but whilst it works, its unhealthy for pretty much every other aspect of the gun and it doesn't last long.
WE SMG8 + Rice MP7 - The SMG8 undoubtedly is quite an ugly sight. It's quite cumbersome and clunky. Performance wise its quite crap. It'll get by fine on semi but auto mag-dumps are quite an achievement to complete, and it really will not like the cold. The hop unit is not the best and its quite hard to adjust sometimes (it also requires a tool). Aside from that, it's efficient enough.
The Rice MP7 is also fine, it feels a bit nicer and its a little more user friendly. It performs well enough to be enjoyable, and it can auto-dump, but certainly not greatly. It will handle relatively cold temperatures but don't expect much. The range is a little rubbish and the accuracy is fine.
These 2 MP7s are prone to breakdowns quite often, as they are internally made of the finest cheese, however, should you identify a broken part, WE have used all the worlds natural resources to create every spare part so you can easily just replace it and keep chugging along, which I suppose is rather nice, though, its much more of a headache than the potential issues that arise from the TM or the VFC (though the headache a TM gives when its broken is arguably worse).
Basically just get a VFC or a TM and don't ramp up the gas pressure, you should be fine.