SerialNoodle

I'll now bore you to death, though, I've a fair bit of experience with GBB MP7 brands (minus KWA). VFC - You should only really stick to the Gen2 (most if not all retailers stock them now unless you get shafted in a dodgy sale). It's full scale with all the proper trades to make people like me happy and it performs very nicely out of the box. It can mag-dump on auto however don't expect the best when its colder. The internals are relatively straight forward and they're fine longevity wise as long as you don't abuse them. There is also the infamous "rear plate crack", as to which seems the only common problem so far, however, VFC sell replacements and aftermarket aluminium ones are available, though, as long as you stick to propane all year long it shouldn't give you any grief. My only personal dislikes are the rather sloppy controls (whilst all MP7's are mushy this one seems to be worse) and the hop unit is very twitchy when using lower weight BB's, though it may be a me problem. The magazine baseplates (and the nub on the follower that keeps it in place) are also incredibly flimsy so try not to drop them. If you do end up breaking a nub, you can drill a small 2mm hole and insert a 2.5mm plug (can just be ground flat) tap into it, then add a small M2.5mm grub screw into it (ideally with some Green Loctite). Tokyo Marui - The TM is pretty much one of the all timers in terms of GBB SMG's. Whilst it comes with the correct trading, it is 8% smaller than the VFC (or its real counterpart). I don't mind it as it makes it just a little more tactile and the magazines fit in my pouches easier, however, people with large hands and gloves may struggle slightly. Performance wise, its more than likely the best you'll ever get as its punchy, has a decent range and accuracy and it will pretty much auto mag-dump any time of the year. Internally, there is the infamous "inside shell crack". This can be prevented by using the sling swivel (which absorbs and dissipates energy from the bolt) and keeping the gas on propane or 144a- my one went on for over 2 years with little sign of wear/damage. If you get it, you will more than likely notice it as the gun with either become very unpredictable when it fires, or just stop working completely, and there's not much you can do about it. There's no spares and no real way to repair it. I also noticed that the bolt catch would only work with the stock collapsed after about a year. My personal dislikes don't go too far with it, I'm not a fan of the reverse bolt release and the weight as to which is can hop is quite limited (about a 0.28g) max. The piston cup would also swell a lot, causing jams. There were suggestions to just dump a load of silicone oil into it, but whilst it works, its unhealthy for pretty much every other aspect of the gun and it doesn't last long. WE SMG8 + Rice MP7 - The SMG8 undoubtedly is quite an ugly sight. It's quite cumbersome and clunky. Performance wise its quite crap. It'll get by fine on semi but auto mag-dumps are quite an achievement to complete, and it really will not like the cold. The hop unit is not the best and its quite hard to adjust sometimes (it also requires a tool). Aside from that, it's efficient enough. The Rice MP7 is also fine, it feels a bit nicer and its a little more user friendly. It performs well enough to be enjoyable, and it can auto-dump, but certainly not greatly. It will handle relatively cold temperatures but don't expect much. The range is a little rubbish and the accuracy is fine. These 2 MP7s are prone to breakdowns quite often, as they are internally made of the finest cheese, however, should you identify a broken part, WE have used all the worlds natural resources to create every spare part so you can easily just replace it and keep chugging along, which I suppose is rather nice, though, its much more of a headache than the potential issues that arise from the TM or the VFC (though the headache a TM gives when its broken is arguably worse). Basically just get a VFC or a TM and don't ramp up the gas pressure, you should be fine.

With that budget, the best I could suggest is trying to find a WE G36. They're relatively cheap, often around £200 and they're relatively reliable and perform decently. There is also the AA R36 (which is a clone of the WE) for £220 and they're normally readily available, plus they come with 2 mags, however, they are a bit cheap quality wise. An SMG setup *may* be a little cheaper. If you're lucky to find a decent one second hand, KWA MP9's are decent guns which sell for £250ish normally, however, they are prone to breakdowns which are normally common so unless you know what's going on with 'em, don't get one. (the VORSK VMP1 seems like a nice alternative though I have no experience on them so I can't comment). Other than that, a gen 2 VFC or a TM MP7 would be the safer bet. You will be hard pressed to find anything for £240 that is decent enough to last, and leaves enough room to buy magazines and gas. It's best to save up and buy yourself something nice like a MWS or a Gen 2/3 VFC AR/416 (or the aforementioned SMG's) and get a few more mags with them.

Sounds like something RWA would call "the best" lol

Vector optics are a good idea if you're not too happy about splashing out a fair chunk of cash on the ones mentioned above me. They're good value for money, their warranties are a bit on the short side (5 years or so), however I'd stick them on par regarding quality and battery life with Vortex. My little Vector Maverick 1x22 MIL has been going good for the better part of a year on the same battery that I originally had, with mostly consistent use. Some vectors also come with a les protector so you're pretty much covered. If not, it's always good to buy a plastic rail one or one that can fit onto the optic.

I'm also trying to convince the guys at skirmish to play more CQB games in the village arena lol

Hello fellow Skirmish Central-goer!

Funny enough I was looking for an MP7 and CHANKZ messaged me... I asked if he had a selling price and I got the same sorta response. I'd suggest staying away.

Hey guys, just need a little help. When I put some air in my HPA tank (from empty), the pressure needle on my Balystik regulator will go past its normal operating pressure and creep up to the red zone, then starts slowly venting air out of the small vent hole in the side. When I put my line into the regulator, the pressure goes down to 110 psi (normal operating pressure) then slowly creeps up. Same happens when it's plugged into a gun. Everything looks fine, my o-rings aren't dry or damaged and there's no debris from what I can see. Any help would be appreciated. Thanks!

Here's some ones I use: Vorsk ASG Geoff Infinity Infinities and Geoff's are the best ones I've used, slightly more expensive. Vorsk are good and cheap though, they come in bulk buy deals a lot.

I've had experience with them so I can lend a hand. You're slightly correct with Arcturus. Whilst they have proprietary Electronic Trigger Unit, it's still a regular V2 gearbox, so upgrades are fine for the most part. Arcturus externals and qualities are also excellent from my experience. E&C is essentially just as good as Arcturus, slightly better perhaps. I like that they have trademarks, plus they don't have proprietary ETUs, so upgrades are fine. Not quite sure about Double Bell, from what I've heard, their quality isn't outstanding. Specna Arms are decent, their externals are surprisingly nice, they do sound a bit whiney out of the box however. Internals are fine for upgrades as well. Because it was also mentioned, VFC and TM. Expensive but the external quality and detailing is the best out of all. Internals will last if you don't touch them but are incredibly annoying and finicky if you don't really know what you're doing. Overall, I'd probably suggest E&C. They have very good quality, and they're good for upgrades. Hope this helps

Sear is worn or broken it seems, had a similar issue when I had a WE Glock. It's probably easier and less annoying to buy a new hammer assembly if you can find one.