ArranTurner
-
Posts
47 -
Joined
-
Last visited
-
Feedback
100%
1 Follower
ArranTurner's Achievements
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
ARES G36K IDZ - EFCS Version, B&T Rail, Spare outer barrel, Modified Sector to allow for Precocking (Uber snappy trigger),ZCI Hi Torque motor, M100 spring, Vert Grip - 5x PTS P-mags (£25 new and quite rare now) and 4 normal mid caps (Untested) £260 collected St Anne’s, over £650s worth new and shoots a dream, but got too many rifles setup for CQB so this needs to go, will also Chuck in an 7.4v Lipo for asking price Has the ‘recoil’ system removed, as it’s garbage£260
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
As per the photo if anyone’s replaced the rail on their NGRS, I’d like to buy your left over bits!NO VALUE SPECIFIED
-
ArranTurner reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Considering parting with my MWS A2 that’s been my main rifle for the past 2 years, it’s in fantastic condition and shoots aswell as it looks, just ready for a change The spec is as follows: - TM MWS - Angry Gun L119A2 Short Rail - Angry Gun 10” Barrel - Angry Gun FA556SA and SF216A - Genuine Ergo grip - Clone BCM Grip - HAO Castle nut - HAO Ambi mag release - Element LA-5 - Element M600 with offset mount - CTR Clone - Laylax arm - Ra-Tech NPAS - Spare Nozzle with NPAS - Factory bucking (can include Unicorn 60, found stock to be better) - 6x TM Mags (gas tight) - 3x SAA P mags (gas tight) - TA01 ACOG + RMR Clone spec with correct irons and La Rue mount - Holy Warrior T2 on Repro Unity 2.26 mount - Vector 3x mag on Repro Unity FTC mount I’d like £1500 ono all in for everything listed above, but happy to discuss splits if the buyer doesn’t want all the mags/optics/accessories but the rifle would have to go first Collection only from Lancashire due to value£1,500
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Razor HD GEN II 1-6 Clone with BO mount and screw in lens protector, adjustment leaver and lens caps £180 collected from St Anne’s £190 Delivered Nearly new condition£180
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
AA T10 Bipod AA Chamber Crazy Jet barrel AA M150 MR Hop 60 Omega nub 5 magazines Shoots great, just never use it, 320fps on a 0.45, can include about 1500 0.45s for asking price£350
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale or swap
- Used
I have for sale a TM 416D upper in good condition, paired with a RAHG 13.5” rail (not certain on brand but cheapest I can find is still over £100) it has a 10.5 outer, which I normally just used a 3” extension with to bring it to 14.5” will include flip up irons, but won’t include the C1 LPVO Mount I also have various other 416 parts available so PM me if you need anything else Will consider a trade for an NGRS M4 upper, or other NGRS parts£175
-
This advert is COMPLETED!
- For sale
- Used
Scar H build Base gun Rocket 16TPA Perun Hybrid V2 Bushings on sector gear SHS Nozzle SHS 12:1 gears 7x modified Battleaxe mids (minor damage to one but works fine) Maxx hop chamber Maple leaf 6.02 barrel Macaron 50deg Omega nub Probably the best performing rifle I own, super snappy and super accurate but everything else I run is 5.56 so swapping between rigs has become a faff so letting it go to fund other projects. Currently doing 260fps on a 0.32G (330fps) will include the MLOK rail but other accessories are extra Cost well over £600 to build including mags, been ran for 4 games, asking £400£400
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale or swap
- Used
Cargo Pack Warrior Assault Systems cargo pack in great condition, will let this go for £40£40
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale or swap
- Used
Micro Fight Krydex microfight in multicam available with the following add ons Krydex Spiritus MK3 £35 Thing 2 Clone £30 5.56 & 9mm pouch £15 Harness and fat strap £15 In total, new, this setup would cost circa £100, I would let this go for £60£60
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale or swap
- Used
TMC AVS available, in multicam pattern and great condition, includes the following extras. TMC AVS £190 FMA triple Crye 5.56 £40 Shekkin Abdo Panel £45 Warrior Assault Systems Utility Pouch £28 3-Band Cummerbund and Tubes £50 New this setup would cost circa £350, I would let this go for £220£225
- GB
-
Been doing some searching but can’t find an answer. Does anybody know I’d the MWS is compatible with AEG body pins? Wanting to add a magic pin to reduce some receiver wobble, I know real ARs have the wobble but it’s becoming irritating now
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I have for sale my MWS URGI This is built from the following parts: Tokyo Marui MWS HAO MK16 Rail (Brand new) HAO URGI Profile Barrel HAO 3-Prong (Brand new RA-Tech NPAS SIXG Super Nub DP Nozzle Return Spring Condition 1 1.70” Scope mount Repro (Very hard to find) Holy Warrior Razor Gen 2 Clone Amount of magazines is negotiable FMA NGAL Element M600 Arisaka M600 mount Repro MOE SL-K Stock Original Box The build cost well over £1000 plus many hours build time, it’s is in pretty much box fresh condition as I run my L119s all the time Runs like a dream at normal power and DMR power levels, Only selling as I have 3 MWSs and one needs to go to fund other projects I would also offer this with a Geissle 1.54” Mount with RMR instead of the C1 mount Willing to sell without the optic for a lower price open to trades for NGRS M4 base Collection Lytham St Annes£850
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
As per the title, cash waitingNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Testing the waters with this one, in absolutely no rush to sell I have for sale my MWS L119A1 This is built from the following parts: Tokyo Marui MWS SIXG Super nub Prometheus 370mm Barrel Modify Tan Bucking Element M600 Clone TA01 Acog Holy Warrior RMR LaRue QD Acog Mount Bruno 3D Surefire Suppressor KAC Style vertical grip KAC rail covers Custom 10” Outer Barrel G&P Storm Grip CAR15 Style stock MS3 Sling RSA sling mount Angry Gun MPA Nozzle (can offer standard nozzle with NPAS if preferred) Original Box Paint job is quite worn now but really suits the look, of the 4 MWSs I’ve owned this is the best performing, on 0.32s at 1J it is truly exceptional, and will happily run 0.36/0.4s with ease Well over £1000 to scratch build, plus the difficult of finding all the parts Anount of included magazines is negotiable Willing to sell without the optic for a lower price Collection Lytham St Annes£750
-
This advert is COMPLETED!
- Swap only
- Used
I have available a nearly new MWS, still with original box It has been upgraded with the following parts - Enhanced Nozzle Return Spring NPAS SIxG Super nub It will also include - 5KU 12” Outer Barrel TM 14.5” Outer Barrel HAO 14.5” URGI Profile Barrel Will preliminary include 2 mags but I have others available for the right deal Reason for sale is I have 3 MWSs and this one gets the least use Only interested in NGRS platform rifles, and mainly interested in an M4 platform This won’t include the optic, but will include the SL-K stock, and the original stock Location is Lytham St Annes near Preston£500