Pete360

Hi, What causes miss feeds? ie my M4 works ok on full auto but not on semi? It will Fire about 4-5 bbs after about 5 pulls on the trigger. Thanks

Hi, I’ve ordered a Cyma .009 from Taiwan Gun. Ordered 6 weeks ago, still not here. It’s not a problem with the sellar, all the problems are with UPS! I’ve paid the customs fee and completed the paperwork and all I’m getting now is the run around. Dreadful service!

I’ve ordered an aeg from Taiwan gun in Poland. Does anyone have any experience of doing this. I’ve paid an additional £45 import charge so surely it must be on its way now?? Thanks

I’ve got the gun working by doing what you have suggested. I got there by trial and error in the end. Thank you very much for your reply, it is much appreciated.

I’ve fitted deans connectors and removed the fuze because there is protection on the mosfet. I’ve also fitted larger thickness wire to assist with current flow. I’ve tried different batteries apart from lipo and like I say mate it works if I connect the battery direct to the mosfet. It’s a strange one! Thanks

I believe so mate, the gun cycles when I fit the battery directly onto the mosfet. The problem only happens when I put the two parts of the gun back together by using the small length of wiring that enables this? I’ve checked all the wiring and connections with a multi meter and there fine? It’s got me baffled? I do think it’s down to resistance on the wire and mosfet. I’m yet to try a lipo yet. Thanks for your interest, much appreciated.

Hi Mr Gold, Thanks for your advice. I’ve soldered the wires onto the two connections on the left hand side of the trigger connection. The gun works on single and auto fire with the battery connected direct into the mosfet, I think this confirms correct wiring downstream of the mosfet itself. I think it boils down to resistance on the wiring and mosfet itself. I’m looking at trying a lipo battery! What are your thoughts on this? I don’t want to because it means spending money on something I don’t use. Your thoughts would be most appreciated. Thanks mate. Pete

Hi, I’ve fitted a mosfet onto my AA R31 and it works great if I connect the battery directly into the mosfet itself but when I connect it to the extension wire that connects the top part of the gun to the bottom nothing happens? I’ve checked all the connections and wiring and it all seems ok? The trigger relay is standard and I don’t use Lipo batteries. Any ideas on how to sort this would be very appreciated.