johnnyj
-
Posts
224 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by johnnyj
-
Thanks mate I will admit I have been reading your posts on these guns and would love the gbb with these style of mags
-
Hi everyone, a pal has asked me to sell this for him as he's not on forums so looking for a guide price to list this. It is missing its front sight and does have marks on it especially the barrel when the faff of a surpressor was not fitted correctly. Ares apc9 what I know that's been fitted is a madbull hop rubber and a black tb barrel and its wired to deans. Suppressor and 5 extra mags as shown in the photo with the stock small , medium and large mag. Just tested it on .25s and it's shooting 314 fps ( just over 350 on .2s if I'm working that out correct) I know sod all about these guns but seen its has a qc gearbox and very easy access. Thanks for helping with this
-
Ahh sorry it would be fully working if I did decide to sell it just trying to gauge what I would get for it as a working rifle. It's a pure hanger queen that's why I took the barrel and stuck it in my skirmish spr
-
Thanks Jim. The gb-tech/vfc front set has long been oop and when new was $530 ( early 2000s ) , the g&p m16a1 lowers are again hard to find. Roger lol atm no the barrel and hop was borrowed for my mod1 but it's only 340fps , plan was to rebuild the gearbox in to a 400fps DMR haha
-
bit of a rare bit of kit this and trying to work out what it's worth. Gb-tech mod0 front set and swan sleeve. Arms 35 scope mounts Arms 22 trc Arms 17 bipod mount Ali m1 scope with butler creek covers G&p m16a1 lower G&p m16a1 stock King arms fake right hand selector Ergo grip Gas buster charge handle Gearbox is a g&p with a btc mosfet Built this up over a year or so and never used it in the field, the gb set has every trade mark you will find on the real stuff and the Arms stuff is all real steel.
-
All good advice guys. Jim and Hudson, its the very back of the scope ( Bell) . From what I can gather it's an old scope that was mounted to a m14 and the angle is fitting for an impact/ fall . Thanks for all the input, I will just live with it
-
Cheap second hand . Cleans up nice so far
-
Hi everyone. I got my hands on a cheap m3 scope and noticed the rear of the scope is wonky lol . Scope works fine etc but just knowing it's like that is setting ocd off. Are the back of these pressure fitted or screwed? Thanks for any insights
-
Building this for a pal ( not keen on the grips but all we had to hand )
-
This advert is COMPLETED!
- For sale
- Used
For sale is this g&p woc car15 gbb . Got this in a bit of a state. I got a new vn bolt as it had a m4 type in it.. Under the front sight is a gouge where in its past someone had not removed the grub screw and pulled the front sight off 😤 When I last used it the pistons o ring let go and I have not replaced it. I'm just trying to be honest as I can with it, I think it has 2 mags but I need to go digging for it so the listing is just for the 1 atm that's gas tight.£220
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I got this l119a1 with the plan to restore it fully , only part left to clean up was the front sight. This is just a shell no gearbox,motor,hop and inner barrel. Dragon red l119a1 body set Correct type of kac rail Angry gun flashhider and silencer Guarder grip Warlord sling plate Hao Slim castle nut Acog with real steel doc shield Rail covers Front Grip stock pad Only thing not included is the peq£250
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Hi . Got some ergo aeg slim grips for sale. These are rubber coated and feel great in the hand , these would be excellent for hpa l119s , mk12 etc. Price is £26.50 posted Please note you can't use standard aeg motors only the slim types£26.50
-
Sun's out so while I fitted a grip to the mod1 got a group photo of these 3
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Hi everyone going to build a mk12 holland from the ground up ... tbh all I have atm is a bare a1 lower and some random bits lol . Parts I'm looking for are : we m4 flat top gbbr upper receiver we m4 buffer tube. we m4 gbbr hop unit Madbull 16" recon barrel set (aeg) madbull 12.5 pri gen iii round handguard (bk or tan) larue lt104 mount Tbh if anyone has a wreck of a we m4 i would even look at that Thanks johnNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
I'm still looking for a set of arms 22 medium mounts real or clones. Thanks for lookingNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
Hi I'm selling up and this is first to go. Fully traded marked we 416c , shooting 330fps . Comes with the grip a hicap mag and 7.4 lipo that fits inside the handguard.£200
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
A very clean little used we xdm ipsc. Is missing the mag well but I find it better in the hand.£70
-
Ahh I'm sure I only have 1 or 2 emags only cheap mids nothing fancy but they would be included
-
I have a shopping bag of mags in the shed all different types
-
Hi all , I'm starting the long process of selling most of my kit. I got this l119a1 with the plan to restore it fully , only part left to clean up was the front sight. This is just a shell no gearbox,motor. Dragon red l119a1 body set Correct type of kac rail Angry gun flashhider and silencer Guarder grip Warlord sling plate Slim castle nut Acog with real steel doc shield Rail covers Grip Only thing not included is the peq Thanks for any help with pricing this.
-
Hi guys I'm in need of some help with this lot , pre covid me and a couple of others did some living history events as a static display. Most of the lads with lots of events still being cancelled decided to pack it all in so rather have all this kit knocking about I'm after some idea of its worth . It will take a couple of days to get it together again but off the top of my head : us corcoran jump boots size 10 , these are broken in and near mint. M42 jump suit none reinforced by kay canvas , got them early 2018 if that makes a difference. Badged up as 82nd, only damage I remember was a button come off and I correctly refitted ( learned something lol) top was 44" , pants sure was 36" M1 helmet , sure this was a late 70s us lid and the liner it has atm was a Dutch unit fitted with m1c webbing , chin cup and I forget what net. Full m1 webbing kay canvas set that includes shovel and garand bayonet with a real med tin. I have loads to sort out - pup , shed loads of full enblocs, shirts , ties , random bags and bits. I'm just looking for some guide prices on this stuff as I just went to find what the boots are new and my eyes watered.. thanks for any help with this and I will get some clear photos in the next day or so.
-
The 'What have you just bought' Thread
johnnyj replied to Cameron364's topic in Guns, Gear & Loadouts
Was unsure about getting one of these mounts but wanted to see what all the fuss was about. Very impressed with the finish and trades but do have a bit of a grumble.. the clamp is a fd unit painted black 😆 Chucked it on my 416c and found the hight to be super comfortable.
-
The 'What have you just bought' Thread
johnnyj replied to Cameron364's topic in Guns, Gear & Loadouts
Some bits that have landed today Super chuffed to get a g&p m16a1 lower to replace the vn lower on my mk12 mod0 build 😀 New bolt , o ring and guide for the wa car15 And a right hand selector for my mk12 mod1 build. Shame I'm away so can't tinker 🥺
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Hi all I'm after some WE gbbr parts for a long term project. Atm I plan on building a mk12 mod H and the only part I have is a bare a1 lower 🤣 Main parts to start it off are : Flat top upper. Buffer tube Any and all pins Tbh anything you might have in a spares box. Thanks johnNO VALUE SPECIFIED
-
The 'What have you just bought' Thread
johnnyj replied to Cameron364's topic in Guns, Gear & Loadouts
Ordered these a long time ago and thought they had gone missing... so ordered more 3 days ago... sods law they turned up this morning lol.
