THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
For sale
Used
34" Waist
32" Leg
I found the leg little narrow and to they have been cut at the bottom as shown in the last picture.
PayPal only and tracked post included
Good working order.
No manual, but simple to use.
Slight damaged caused at the rear from me using once pointing the barrel at the wrong angle.
PayPal only and tracked 2nd class post included.
Thanks for looking!
New, only removed from packaging for testing.
1 left
Very bright light
Fits 20mm rail
Takes 2 X CR123 (Not included)
PayPal only and tracked post included.
Great quality Defcon 5 Plate Carrier
Includes:
Mag pouches holds 7 X 5.56mm and 5 X 9mm
Magazine dump pouch
Small radio pouch
2 X utility pouches
ID Panel
FMA sling holder
Camel pack
Plate hanger
Defcon 5 Carry Bag
PayPal only and tracked post included.
Thanks for looking
G&G 30.5' Handguard.
No damage, sprayed green / tan
**Please note it's missing the 3 screws which for the rail to the barrel nut.
PayPal only
RM tracked post included.
Unknown brand HK416D Metal Receiver
No damage
Signs of wear and has been sprayed green in places.
Missing selector switch and mag release.
**Please note SHS selector switches do not fit, they are slightly too small.
HK branding on both sides and bolt plate.
PayPal only
RM tracked post included
AA R85 shell only.
Good condition & no damage.
Will fit G&G but as far as I can tell the recoil function doesn't work.
PayPal only
Tracked RM post included.
Unknown brand HK416D Stock & Buffer Tube
No damage
Signs of wear and has been sprayed green /Tan in places.
HK branding on both sides of the stock.
PayPal only
RM tracked post included
Great condition E&C Gearbox with the following...
Bolt release mechanism
Hex Screws
8mm Bearings
Safety Latch
Anti Reversal Latch
Cut off lever
Selector Plate
Tracked post included and PayPal only 😁
Thanks for looking 🖖
PayPal ONLY 👍
Tracked Delivery included 😃
A: £9
TM/Clone Standard Plastic M4 Upper Receiver. Rear receiver pin lugs are intact. No damage or cracks.
Virtually identical to my TM except it may allow for the locking bolt plate feature on the correct set up.
B: £7
Unknown brand M-Series Upper Receiver. Looks like it's had some dremel work.
😄 £7. C
Unknown brand M-Series Stock tube. Please note that the inside of this tube is narrower than most standard AEG I've come across and I do not have the fixing screw ☹️. Please check against the following measurements 👉 21.3mm Inner Width
😧 £7. D
Unknown brand M-Series Stock tube. Please note that the inside of this tube is narrower than most standard AEG I've come across and I do not have the fixing screw ☹️. Please check against the following measurements 👉 21.7mm Inner Width
E: SOLD
Unknown brand M-Series Stock tube. Please note that the inside of this tube is narrower than most standard AEG I've come across and I do not have the fixing screw ☹️. Please check against the following measurements 👉 21.5mm
F: SOLD
Tippmann Recon Polymer Receiver. for quick change spring gearboxes.
Perfect condition, great to replace damaged receivers since there is no furniture.
G: £15
Unbranded Metal M-Series Lower Receiver. No damage, just signs of wear. Again good option as a replacement part as no furniture.
H: £15
Believe it's a G&G M4 Hand Guard. Slightly chunky compared to a TM version.
Please check against the following measurements 👉 39.8mm front end cap
Please feel free to ask questions about any of the above items.
you can cite the listing in general or just leave feedback without mentioning the specific listing. better to do it via the feedback system though as that's where folks will be looking.
No damage
Some signs of wear, but nothing serious. Pictures should be clear enough 😁
Payment through PayPal (As per AF guidelines)
Postage will be tracked either through RM or Hermes within the UK. P&P £3.95
Feel free to ask questions, but I don't know much about it other than condition.
Thanks for posting. I didn't realise the DSG version has no semi auto function. I'd got a dsg g&g gearbox off ebay and thought I had an issue with my selector switch.
Your post saved me some time. Cheers!