Daveoc33
-
Posts
275 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Daveoc33
-
This advert is COMPLETED!
- For sale
- Used
Here is my cybergun fnx45 civilian. Externally very good condition. Has a maple leaf Mr hop rubber (I think - it's yellow) and a crazy jet 6.04 inner barrel. It's shooting slightly low at 265fps with red gas. I upgraded the barrel and hop rubber to try and fix the low fps but its not made a noticeable difference. The nozzle doesnt stay in the hop rubber when you rack the slide so it could maybe be a seal issue. Need some cash quickly otherwise I'd persevere. £70 including postage I won't sell unless you have ukara.£70
-
This advert is COMPLETED!
- For sale
- Used
Here is my army armament R32. Good condition. Some wear to the silencer adapter. 315fps £55 including postage I won't sell unless you have ukara.£55
-
This advert is COMPLETED!
- For sale
- Used
Here is my asg cz p-09. Good condition. Crack in mag base plate. Shoots at 300fps with red gas. There is also a snapped part on the rear of the blowback housing. It's a curved piece of metal that rides over the hammer when the action cycles over the hammer. I still have the part if you want to reattach it but it works fine without it. I've just redone the chrono with a fresh can of green gas and it's shooting well on green now around the 300fps mark (see picture with 8 chrono readings) . When I was using this earlier this year with green gas I remember it was lower, hence swapping to red. £40 including postage I won't sell unless you have ukara.£40
-
This advert is COMPLETED!
- For sale
- Used
Here is my TM night warrior. Very good condition. Chronos at just under 300fps. Comes with 1 gas tight mag. £95 including postage I won't sell unless you have ukara.£95
-
Good on you for putting this together. To me it looks like a home brew of the attacksense system but with servos to indicate a target to shoot instead of LEDs. I'm not sure how many game modes you could have given the setup but the obvious ones are just random targets in sequence or random simultaneous targets. Increasing the difficulty with more random targets or less time to shoot the presented targets. Good luck to you! And I hope you don't shoot the raspberry pi during testing
-
This advert is COMPLETED!
- For sale
- Used
Very good condition. £5 each including postage.£5
-
This advert is COMPLETED!
- For sale
- Used
Very good condition. £5 including postage.£5
-
This advert is COMPLETED!
- For sale
- Used
Very good condition. £5 including postage.£5
-
This advert is COMPLETED!
- For sale
- Used
Good overall condition £10 all in£10
-
This advert is COMPLETED!
- For sale
- Used
Unknown brand g36 pistol grip. No base plate. £8 all in£8
-
This advert is COMPLETED!
- For sale
- Used
Unknown brand g36 handguard. Some orange paint inside and its had a few knocks. £7 all in£7
-
This advert is COMPLETED!
- For sale
- Used
Plastic m4 carry handle. £4£4
-
This advert is COMPLETED!
- For sale
- Used
Metal lower receiver. A little damage around the trigger guard. £7 posted.£7
-
This advert is COMPLETED!
- For sale
- Used
Metal lower receiver. Not sure what brand. £7 including postage£7
-
This advert is COMPLETED!
- For sale
- As new
This came with a rifle and has never been used. Red and green illumination. £25 all in£25
-
https://www.airsoftworld.net/asg-branded-cz-p-09-spare-gas-magazine.html @ZakLav- is this what you're after?
-
This is a decent hop rubber and nub: https://www.ak2m4.co.uk/internal-parts/hop-up-buckings-nubs/maple-leaf-macaron-60-nub Can't comment on barrels as I normally just switch the rubber and leave it at that. Its such a cheap and effective upgrade.
-
Optics warehouse has 10% off with code QUEEN10. They sell vortex stuff there and they seem to be the cheapest for that even without the discount. Someone correct me if I'm wrong
-
I'd be surprised any of these didn't fit but you're probably best off measuring. This thread goes on about stocks and buffer tubes: https://arniesairsoft.co.uk/forums/index.php?/topic/177260-milspec-vs-commercial-spec-ar-buffer-tubes/#:~:text=The Mil-Spec buffer tube,tube is 1.168" in diameter.&text=AEGs - Most AEGs are based,many more (most actually).
-
The pts enhanced polymer stock has reasonable space. There's also the vfc qrs. If you want something slimmer you can get a magpul ctr / MOE with an enhanced (bigger) butt pad and bore out the butt pad. Davescustomairsoft do these ready made or there's and airsoft artisan 3d printed butt pad that does the same thing. Lots more choices too depending on what you like the look of. Nearlty forgot the bcm gunfighter mod 1 also looks like it has some decent space (made by vfc).
-
They remove the French vat in the checkout process so you can see that bit removed from what you pay before you put card details in. I did get a bit excited seeing the 20% off bit and my impulse buy response was triggered. I've yet to buy anything still though. Didn't see a field for a ukara either but maybe that's further down the checkout process.
-
Evike now have a warehouse in europe (France apparently) and are shipping to the UK. https://evike-europe.com/ username: Evike Password: Europe for early bird access use WELCOME20 for 20% off your first order. They say that orders for the UK are VAT exempt: https://evike-europe.com/delivery-methods - does that mean they pay the VAT? UK delivery in 2-3 days by DPD (it's not UPS!! ) Free shipping on orders over 150 euros Customs fees apply (whatever that means) Might be worth a punt. At a glance it looks like they are gunfire.com-ish prices with some bettter some worse. LCT stuff with euro to GBP exchange rate and 20% off and free shipping comes out quite reasonable. Some RIFs like the scorpion evo and cyma sr25 are "prohibited from sale" in the UK and a few other countries for reasons unknown.
-
WE/Cybergun Desert Eagle slide/frame/mag compatibility
Daveoc33 replied to Sifu Steve's topic in Guns, Gear & Loadouts
The green gas mag you received will be for the WE Desert eagle licenced by cybergun. The CO2 full auto desert eagles are made by KWC (licenced by cybergun). the WE is semi auto only. I'm pretty sure this is right. There are 2x full auto desert eagles made by KWC. One is the standard DE and the other is the L6. You'd expect them to both be compatible given that the only real difference is the rail on the lower frame. But as you say you won't be certain of this unless someone out there has both models and can check. If the KWC L6 and standard DE are compatible then you have the problem of finding KWC parts which are quite hard to find. I'm guessing the metal bodies you ordered were for the WE desert eagle or perhaps for the Tokyo Marui. -
I'm on the lookout for kjw kc02 (asg special teams rifle) or an asg mp9 (fixed foregrip) if they have them. Or a TM mp7
-
Best delivered-to-door 2.32J spring sniper for non poors?
Daveoc33 replied to Rogerborg's topic in Single Action Guns
Does anyone know if the Double Eagle M66 Pro 700 any good out of the box? I haven't been able to find much forum chatter about these. Saying that I imagine it'll be a tough job finding a better shooter than an SRS.
