Danhc92
-
Posts
39 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Danhc92
-
The magz in the photo are ngrs mags, do you have a photo of the actual mags? -
You can use all the furniture of the psg1 with a g3 v2 gearbox bar the grip. You will also need to swap the hop unit for a g3 kne. Begadi used to do lovely real wood grips and king arms used to do black rubber ones but i havnt seen them for a while. The drawback of using a v2 gearbox is that you do loose some cylinder volume in comparison to the v4 gearbox.
-
Does pushing the trigger forward reset the sear? If so, its normally its due to dirt or burs on the sears.
-
This advert is COMPLETED!
- For sale
- As new
Make: A&K Gun/Model: M249 mk1 with g&p ris feed cover Accessories: Gun and box mag Condition: Good, shoots well. FPS: 315 on a 0.2 Splits/Swaps/Part Exchange: None Price/Payment: £250 plus postage Pictures: The gun has a fantastic rate of fire on a 7.4v battery as shown in the video. And can also be used with a 11.1v if you prefer an even higher rate of fire The box mag has been upgraded with a g&p m249 feeding mechanism however unfortunately it has jammed, should be an easy fix. The gun itself has been upgraded with a neodynium high speed motor, shs 13:1 short stroked gears, shs blue piston with swiss cheese and short stroke mod. The hop rubber has been replaced with a tnt which gives good range for the fps.£250
- GB
-
This advert is COMPLETED!
- For sale
- Used
Make: TM Gun/Model: AA12 Accessories: Gun, drum mag, low cap, hardcase and 11.1v lipo. Condition: used FPS: 315 on a 0.2g bb Splits/Swaps/Part Exchange: MWS and or mags Price/Payment: £200 including postage Pictures: The AA12 has had the mosfet replaced with a pico, meaning you can now use lipos and the spring was replaced with an eagle 6 m90. The motor was replaced with an infinity 30k neodynium motor which gives a great rate of fire and trigger response. The semi auto cut off leaver broke, so I removed it. You can still fire single shots with a quick pull of the trigger though if needed. Unfortunately the right hand side of the gearbox has cracked, price reduced to reflect this.£200
Ashford, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
Make: Mauzen Gun/Model: P99 Accessories: 3 leaking mags, 10mm silencer adapter and silencer, blackhawk serpa holster, 2 spare hop rubbers, spare broken P99, hardcase with foam Condition: gun is good, mags leak FPS: 300 on a 0.2 Splits/Swaps/Part Exchange: None Price/Payment: £160 plus postage Pictures: The P99 has 2 rare spare hop rubbers, a custom internally tapped and aligned barrel with an adapter that allows it to be used with any silencer. A spare broke P99 for parts and a blackhawk serpa. With the silencer it is whisper quiet like a mk23 but on a more compact scale, making it ideal as a secondary weapon for snipers.£160
-
No worries, you can roughlt estimate the fps with a coke can, for below 350 the bb shouldnt go through the bottom but should go through the side from memory.
-
I've found the RA-Tech nozzle and barrel to be good investments. The barrel have great accuracy and the nozzle has lasted 6 years now. The RA-Tech bolt unfortunately was way off spec and needed a fair amount of material sanding off the receiver to get it to cycle smoothly. Mapleleaf buckings are great with the metal c ring which helps seal and grip the nozzle. I chose 60d for 450 fps, if you are running it sub 350 the 70d will most likely be too hard, 50d will probably perform better. I would recommend getting a proper scope that is rated to recoil, Mine destroyed 2 scopes before I switched to a vortex.
-
They are all the same age and are all gen 2
-
Has anyone ever experienced varying fps between mags? 3 of my mags are outputting 250fps on 0.3g whilst the other two are outputting 290fps on 0.3g bbs.
