BADGERF1ST

Medium sized hard case for rifles and SMG's.
 
Foam is in perfect condition with no tears or damage.
 
Internal compartment measures 31.5 Inch by 10.5 Inch.
 
For reference it will hold an L119A2 with silencer fitted and stock collapsed.
 
Will leave the stickers on unless asked to remove them.
 
£40 including postage and PayPal.

Unfortunately due to poor health and mounting bills, I'm parting with the one thing I told myself I never would, my fully loaded, fully upgraded, HAO L119A2 and extremely rare HAO FA556SA suppressor (hardcore version).
 
Condition wise, it has never been skirmished and has been purely a display piece and something of a hobby in itself. As such it is in great condition.
The only cosmetic marks are a few scratches on the lower and upper rails, under the rail cover and PEQ box. Otherwise it's all cleaned, lubed and good to go.
 
As it has had such little use it will more than likely need bedding in, the hop setting up, the sight zeroing etc.
 
I also suspect it to be running a little hot due to the fitted G&P adjustable red valve and the 6.01 barrel combo, replacing the valve with stock Marui or similar will bring it in line.
 
Built from a standard MWS and based on the rifle used by Jay_Cal87 which features some slightly different parts to the standard L119A2 set up.
 
What you get - Everything seen in the pictures, full build list below.
 
External Parts - 
 
HAO's L119A2 full kit for Marui MWS,
HAO's FA556SA suppressor (hardcore version, made of steel with actual baffles),
HAO's Geissele trigger pin set (recessed as on the real steel),
Magpul CTR stock - Genuine,
Magpul K2 grip - Genuine,
Magpul ASAP QD sling plate - Genuine,
Magpul enhanced trigger guard - Genuine,
Magpul B.A.D lever - Genuine,
Magpul RSA sling mount - Genuine,
Arisaka finger stop - Genuine,
Manta rail panel - Genuine,
Guns Modify Geissele Airborne charging handle repro,
Angry Gun steel dust cover,
Angry Gun steel forward assist,
SpecPrecision Unity Hot Button repro,
SpecPrecision Unity Micro Hub repro,
SpecPrecision Modlite OKW 18350 torch repro,
Spec Precision Unity Micro T2 mount repro,
SpecPrecision Aimpoint 3xMag-1 repro,
Wadsn Unity FTC magnifier mount repro,
Holy Warrior Aimpoint T2 repro,
Element PEQ with correct stickers,
PTS low profile Steel QD sling adapter,
2x Ace 1 Arms P-Mags (both have slow leaks) fitted with Taran Tactical repro magazine extensions,
Repro Magpul MS3 sling,
Box of CR123 batteries.
 
Also included are the tools required for barrel removal and a castle nut wrench, as well as all of the packaging I've retained from building it.
 
Internal Parts - 
 
Tokyo Marui OEM hop unit and adjuster with standard Marui rubber and SixG Super Nub,
PDI 6.01 Steel inner barrel,
Angry Gun Steel bolt carrier,
G&P CNC trigger box full set with lightweight ZET plate and bolt catch,
BJ Tac Steel trigger with Geissele marking,
G&P Aluminium buffer V2 with adjustable weight,
Angry Gun 130% recoil spring,
G&P reinforced nozzle set with G&P power adjustable red nozzle (to be completely transparent I believe this nozzle, even at it lowest setting, will run hot and will likely need to be replaced with a standard TM or similar nozzle for game use).
 
All in all this has cost a small fortune and taken 2 years of constant tinkering and attention to detail and is a proper one off.
 
Asking £1250 for everything, collection from Snodland in Kent would be preffered, however shipping can be arranged at buyers cost, just note it will be quite expensive due to the value, this isn't something I would want to send uninsured.
 
Any questions please feel free to ask and thanks for taking the time to slog through all this!
 
 
 
 

Unfortunately due to poor health and mounting bills, I'm parting with the one thing I told myself I never would, my fully loaded, fully upgraded, HAO L119A2 and extremely rare HAO FA556SA suppressor (hardcore version).
 
Condition wise, it has never been skirmished and has been purely a display piece and something of a hobby in itself. As such it is in great condition.
The only cosmetic marks are a few scratches on the lower and upper rails, under the rail cover and PEQ box. Otherwise it's all cleaned, lubed and good to go.
 
As it has had such little use it will more than likely need bedding in, the hop setting up, the sight zeroing etc.
 
I also suspect it to be running a little hot due to the fitted G&P adjustable red valve and the 6.01 barrel combo, replacing the valve with stock Marui or similar will bring it in line.
 
Built from a standard MWS and based on the rifle used by Jay_Cal87 which features some slightly different parts to the standard L119A2 set up.
 
What you get - Everything seen in the pictures, full build list below.
 
External Parts - 
 
HAO's L119A2 full kit for Marui MWS,
HAO's FA556SA suppressor (hardcore version, made of steel with actual baffles),
HAO's Geissele trigger pin set (recessed as on the real steel),
Magpul CTR stock - Genuine,
Magpul K2 grip - Genuine,
Magpul ASAP QD sling plate - Genuine,
Magpul enhanced trigger guard - Genuine,
Magpul B.A.D lever - Genuine,
Magpul RSA sling mount - Genuine,
Arisaka finger stop - Genuine,
Manta rail panel - Genuine,
Guns Modify Geissele Airborne charging handle repro,
Angry Gun steel dust cover,
Angry Gun steel forward assist,
SpecPrecision Unity Hot Button repro,
SpecPrecision Unity Micro Hub repro,
SpecPrecision Modlite OKW 18350 torch repro,
Spec Precision Unity Micro T2 mount repro,
SpecPrecision Aimpoint 3xMag-1 repro,
Wadsn Unity FTC magnifier mount repro,
Holy Warrior Aimpoint T2 repro,
Element PEQ with correct stickers,
PTS low profile Steel QD sling adapter,
2x Ace 1 Arms P-Mags (both have slow leaks) fitted with Taran Tactical repro magazine extensions,
Repro Magpul MS3 sling,
Box of CR123 batteries.
 
Also included are the tools required for barrel removal and a castle nut wrench, as well as all of the packaging I've retained from building it.
 
Internal Parts - 
 
Tokyo Marui OEM hop unit and adjuster with standard Marui rubber and SixG Super Nub,
PDI 6.01 Steel inner barrel,
Angry Gun Steel bolt carrier,
G&P CNC trigger box full set with lightweight ZET plate and bolt catch,
BJ Tac Steel trigger with Geissele marking,
G&P Aluminium buffer V2 with adjustable weight,
Angry Gun 130% recoil spring,
G&P reinforced nozzle set with G&P power adjustable red nozzle (to be completely transparent I believe this nozzle, even at it lowest setting, will run hot and will likely need to be replaced with a standard TM or similar nozzle for game use).
 
All in all this has cost a small fortune and taken 2 years of constant tinkering and attention to detail and is a proper one off.
 
Asking £1250 for everything, collection from Snodland in Kent would be preffered, however shipping can be arranged at buyers cost, just note it will be quite expensive due to the value, this isn't something I would want to send uninsured.
 
Any questions please feel free to ask and thanks for taking the time to slog through all this!
 
 
 
 

Unfortunately due to poor health and mounting bills, I'm parting with the one thing I told myself I never would, my fully loaded, fully upgraded, HAO L119A2 and extremely rare HAO FA556SA suppressor (hardcore version).
 
Condition wise, it has never been skirmished and has been purely a display piece and something of a hobby in itself. As such it is in great condition.
The only cosmetic marks are a few scratches on the lower and upper rails, under the rail cover and PEQ box. Otherwise it's all cleaned, lubed and good to go.
 
As it has had such little use it will more than likely need bedding in, the hop setting up, the sight zeroing etc.
 
I also suspect it to be running a little hot due to the fitted G&P adjustable red valve and the 6.01 barrel combo, replacing the valve with stock Marui or similar will bring it in line.
 
Built from a standard MWS and based on the rifle used by Jay_Cal87 which features some slightly different parts to the standard L119A2 set up.
 
What you get - Everything seen in the pictures, full build list below.
 
External Parts - 
 
HAO's L119A2 full kit for Marui MWS,
HAO's FA556SA suppressor (hardcore version, made of steel with actual baffles),
HAO's Geissele trigger pin set (recessed as on the real steel),
Magpul CTR stock - Genuine,
Magpul K2 grip - Genuine,
Magpul ASAP QD sling plate - Genuine,
Magpul enhanced trigger guard - Genuine,
Magpul B.A.D lever - Genuine,
Magpul RSA sling mount - Genuine,
Arisaka finger stop - Genuine,
Manta rail panel - Genuine,
Guns Modify Geissele Airborne charging handle repro,
Angry Gun steel dust cover,
Angry Gun steel forward assist,
SpecPrecision Unity Hot Button repro,
SpecPrecision Unity Micro Hub repro,
SpecPrecision Modlite OKW 18350 torch repro,
Spec Precision Unity Micro T2 mount repro,
SpecPrecision Aimpoint 3xMag-1 repro,
Wadsn Unity FTC magnifier mount repro,
Holy Warrior Aimpoint T2 repro,
Element PEQ with correct stickers,
PTS low profile Steel QD sling adapter,
2x Ace 1 Arms P-Mags (both have slow leaks) fitted with Taran Tactical repro magazine extensions,
Repro Magpul MS3 sling,
Box of CR123 batteries.
 
Also included are the tools required for barrel removal and a castle nut wrench, as well as all of the packaging I've retained from building it.
 
Internal Parts - 
 
Tokyo Marui OEM hop unit and adjuster with standard Marui rubber and SixG Super Nub,
PDI 6.01 Steel inner barrel,
Angry Gun Steel bolt carrier,
G&P CNC trigger box full set with lightweight ZET plate and bolt catch,
BJ Tac Steel trigger with Geissele marking,
G&P Aluminium buffer V2 with adjustable weight,
Angry Gun 130% recoil spring,
G&P reinforced nozzle set with G&P power adjustable red nozzle (to be completely transparent I believe this nozzle, even at it lowest setting, will run hot and will likely need to be replaced with a standard TM or similar nozzle for game use).
 
All in all this has cost a small fortune and taken 2 years of constant tinkering and attention to detail and is a proper one off.
 
Asking £1250 for everything, collection from Snodland in Kent would be preffered, however shipping can be arranged at buyers cost, just note it will be quite expensive due to the value, this isn't something I would want to send uninsured.
 
Any questions please feel free to ask and thanks for taking the time to slog through all this!
 
 
 
 

Unfortunately due to poor health and mounting bills, I'm parting with the one thing I told myself I never would, my fully loaded, fully upgraded, HAO L119A2 and extremely rare HAO FA556SA suppressor (hardcore version).
 
Condition wise, it has never been skirmished and has been purely a display piece and something of a hobby in itself. As such it is in great condition.
The only cosmetic marks are a few scratches on the lower and upper rails, under the rail cover and PEQ box. Otherwise it's all cleaned, lubed and good to go.
 
As it has had such little use it will more than likely need bedding in, the hop setting up, the sight zeroing etc.
 
I also suspect it to be running a little hot due to the fitted G&P adjustable red valve and the 6.01 barrel combo, replacing the valve with stock Marui or similar will bring it in line.
 
Built from a standard MWS and based on the rifle used by Jay_Cal87 which features some slightly different parts to the standard L119A2 set up.
 
What you get - Everything seen in the pictures, full build list below.
 
External Parts - 
 
HAO's L119A2 full kit for Marui MWS,
HAO's FA556SA suppressor (hardcore version, made of steel with actual baffles),
HAO's Geissele trigger pin set (recessed as on the real steel),
Magpul CTR stock - Genuine,
Magpul K2 grip - Genuine,
Magpul ASAP QD sling plate - Genuine,
Magpul enhanced trigger guard - Genuine,
Magpul B.A.D lever - Genuine,
Magpul RSA sling mount - Genuine,
Arisaka finger stop - Genuine,
Manta rail panel - Genuine,
Guns Modify Geissele Airborne charging handle repro,
Angry Gun steel dust cover,
Angry Gun steel forward assist,
SpecPrecision Unity Hot Button repro,
SpecPrecision Unity Micro Hub repro,
SpecPrecision Modlite OKW 18350 torch repro,
Spec Precision Unity Micro T2 mount repro,
SpecPrecision Aimpoint 3xMag-1 repro,
Wadsn Unity FTC magnifier mount repro,
Holy Warrior Aimpoint T2 repro,
Element PEQ with correct stickers,
PTS low profile Steel QD sling adapter,
2x Ace 1 Arms P-Mags (both have slow leaks) fitted with Taran Tactical repro magazine extensions,
Repro Magpul MS3 sling,
Box of CR123 batteries.
 
Also included are the tools required for barrel removal and a castle nut wrench, as well as all of the packaging I've retained from building it.
 
Internal Parts - 
 
Tokyo Marui OEM hop unit and adjuster with standard Marui rubber and SixG Super Nub,
PDI 6.01 Steel inner barrel,
Angry Gun Steel bolt carrier,
G&P CNC trigger box full set with lightweight ZET plate and bolt catch,
BJ Tac Steel trigger with Geissele marking,
G&P Aluminium buffer V2 with adjustable weight,
Angry Gun 130% recoil spring,
G&P reinforced nozzle set with G&P power adjustable red nozzle (to be completely transparent I believe this nozzle, even at it lowest setting, will run hot and will likely need to be replaced with a standard TM or similar nozzle for game use).
 
All in all this has cost a small fortune and taken 2 years of constant tinkering and attention to detail and is a proper one off.
 
Asking £1250 for everything, collection from Snodland in Kent would be preffered, however shipping can be arranged at buyers cost, just note it will be quite expensive due to the value, this isn't something I would want to send uninsured.
 
Any questions please feel free to ask and thanks for taking the time to slog through all this!
 
 
 
 

The most realistic airsoft suppressor on the market. If you know, you know.
 
Never skirmished, but has been mounted to a RIF. There are a few scuffs and scratches (pictured), but it’s a suppressor…
 
Fits HAO and RS flash hiders.
 
£140 all in!

Truly heartbroken to even have to list this one, but one full Guarder upgraded Marui P226 fitted with a genuine M3 tactical light, with three Nineball routered and valved Marui magazines, all wrapped in a SIG branded hardcase.
 
Now, there is VERY little Marui left in this thing. I built this to be as realistic as it could possibly be, same materials where possible, as close to the original weight as possible etc, and it turned out spectacular.
It only contains the original trigger housing and hammer housing, everything else is Guarder, bar the inner barrel (PDI 6.01), a Nineball piston head and a Maple Leaf Delta hop rubber.
 
Full build list -
 
Tokyo Marui P226R,
Guarder Aluminium Frame,
Guarder Sig P226 Grips,
Guarder Steel CNC Slide With Lightweight Nozzle Housing,
Guarder Steel Outer Barrel,
Guarder Steel Luminous Night Sights,
Guarder Steel Hammer,
Guarder Steel Magazine Release,
Guarder Steel Magazine Catch Plate,
Guarder Steel Take-down Lever,
Guarder Steel Decoking Lever,
Guarder Steel Trigger (Early Type),
Guarder Steel Slide Catch,
Guarder Steel Dummy Fire Pin Set,
Guarder Steel Recoil Spring Guide (currently fitted with 130% springs, 150% included if needed),
Guarder Steel Sear,
Guarder Steel Knocker,
Guarder Steel Knocker Lock,
Guarder Aluminium Hop Chamber,
Guarder Nozzle and Valve Set,
Guarder Spring Set and Clips etc,
Nineball Dyna Piston Head,
Nineball Magazine Valves (Adjustable) x3,
Nineball Gas Routers x3,
PDI Steel 6.01 Inner Barrel,
Maple Leaf Delta Hop Rubber,
Genuine M3 Tactical Illuminator.
 
Built like a tank, with more steel than something really steely, weighs a ton, and cycles and fires superbly.
 
Is in like new condition having seen very little use outside of just breaking it in, never been outside and the only mark is a small scratch from the decocker. Slide locks with no issues (Green Gas), all 3x mags are tight.
 
All in all this has cost in excess of £800 to put together, I know, it's been a labour of love, but £500 including postage and PayPal fees will see it arrive safely on your door step.
 
JUST TO NOTE - I have no idea of the current FPS as I don't currently own a Chrono, however the magazine valves are adjustable so should be within skirmishable range.

Another reluctant sale due to poor health.
 
Cam870 'L74A1' build, body is a MKII, with G&P steel folding stock, APS magazine tube extension, APS real wood forend and is fitted with the MKIII bolt which uses CO2 stored in the shells, NOT the bolt like previously.
 
Has been on display since purchase, and, as all my RIF's, is in great condition with only minor signs of wear and tear.
 
Comes with four boxes of gas tight (always stored with a little maintenance gas) shells, a pretty much full tube of reusable flower wads, a handful of reusable slug rounds, and a big boy CO2 charger.
 
£350 collected from Snodland in Kent, or £375 including postage and PayPal.

Another reluctant sale due to poor health.
 
Cam870 'L74A1' build, body is a MKII, with G&P steel folding stock, APS magazine tube extension, APS real wood forend and is fitted with the MKIII bolt which uses CO2 stored in the shells, NOT the bolt like previously.
 
Has been on display since purchase, and, as all my RIF's, is in great condition with only minor signs of wear and tear.
 
Comes with four boxes of gas tight (always stored with a little maintenance gas) shells, a pretty much full tube of reusable flower wads, a handful of reusable slug rounds, and a big boy CO2 charger.
 
£350 collected from Snodland in Kent, or £375 including postage and PayPal.

Brand new WE Desert Eagle L6 in Black.
 
This is the full metal, green gas, semi only version, NOT the plastic lowered, CO2, full auto model.
 
Was purchased at the same time as my HAO L119A2 kit and in all the excitement it was taken out of the box, checked over and then put back in the box and completely forgotten about until finding it about an hour ago.
As much as I'd love to keep it, I could really do with some cash.
 
Not a scratch on it, comes with all the original gubbins, 1 extra magazine, used but gas tight, and a Blackhawk Molle holster, both left over from my old original version WE Desert Eagle.
 
£185 including postage and PayPal fees.
 
 

Reluctant sale of my custom WE HK416c.
 
Inspired in part by the LWRC UCIW.
 
Rifle itself is in great, lightly used and fully working condition, never skirmished and features full trademarks (rare for WE), and has been fitted with the following -
 
Real steel LWRC UCIW stock, buffer tube and lock nut,
 
Real steel weighted buffer (full size, buffer tube is an inch shorter than standard so no buffer spacer required),
 
Genuine Magpul MOE grip in FDE,
 
Genuine Magpul RVG in FDE,
 
FG Airsoft medium buffer spring,
 
VFC 416 rear sight,
 
Angry Gun 416 charging handle,
 
HAO 416 flash hider,
 
New Age steel dust cover, 
 
Repro Troy rear double sling mount and repro Daniel Defense front sling mount,
 
Genuine Ergo ladder rail covers on the upper and Manta rail covers on the lower rail,
 
Holy Warrior T2 red dot with LaRue QD mount,
 
Element PEQ-15 with UKSF stickers.
 
Also comes with a total of 3x magazines in black and 4x magazines in dark earth, all of which are gas tight.
 
Looking for £510 including postage and PayPal fees.
 
(Just to note the original parts are gone and will not be included in the sale, thanks.)
 
 

Beta Project WMX200 in black with folding mount.
Full aluminium construction with great finish, constant only, 250 lumens, visible light only.
 
Two of these available.
 
£20 each Including postage and PayPal (Approx £7).
 

VFC SCAR H in black, barely used and in great condition, the only wear and tear is on the rails from fitting and removing accessories.
 
Rifle itself is completely stock internally and comes with one gas tight magazine.
Externally fitted with an AngryGun ACR stock and metal stock adapter and a genuine Magpul Miad 1.1 grip, original stock and grip are long gone unfortunately and NOT included in the sale.
 
Will be sent in the original box (turned inside out for shipping purposes) however the plastic insert was thrown away as the rifle doesn't fit with the ACR stock anyway, but it will be packaged securely and well wrapped.
 
Comes with the following -
 
VFC SCAR H in black, retails at £399.95 (lowest price I've found when in stock, currently out of stock everywhere)
 
AngryGun ACR stock and adapter (rare as hens teeth to get hold of, originally cost £124.99)
 
Magpul Miad gen 1.1 grip, retail at £40.99,
 
Big Dragon steel AAC 51T flash hider and QD SCAR suppressor set, retails at £34.99 (original VFC flash hider included),
 
Elcan Specter 1x - 4x adjustable, with Docter mount (No Docter sight included, mount only), retails at £125
 
Element LA5-C UHP green laser version, retails at £54.99
 
Air Force One Atlas bipod, retails at £54.99
 
Element Tango Down style vertical grip, a little loose on the rail but does the job, retails at £10
 
Element M3X torch with pressure pad and IR lense cover, retails at £35
 
Set of Element SCAR rail covers, retails at £15.
 
VFC steel SCAR full length barrel extension, retails at £44.99.
 
Total retail value of £940.90.
 
Asking £550 including ParcelForce 48 shipping and PayPal fees.
 
No swaps and will only split accessories if the rifle goes first.
 
Item located in Snodland in Kent, will knock £15 off the price for collection.

VFC SCAR H in black, barely used and in great condition, the only wear and tear is on the rails from fitting and removing accessories.
 
Rifle itself is completely stock internally and comes with one gas tight magazine.
Externally fitted with an AngryGun ACR stock and metal stock adapter and a genuine Magpul Miad 1.1 grip, original stock and grip are long gone unfortunately and NOT included in the sale.
 
Will be sent in the original box (turned inside out for shipping purposes) however the plastic insert was thrown away as the rifle doesn't fit with the ACR stock anyway, but it will be packaged securely and well wrapped.
 
Comes with the following -
 
VFC SCAR H in black, retails at £399.95 (lowest price I've found when in stock, currently out of stock everywhere)
 
AngryGun ACR stock and adapter (rare as hens teeth to get hold of, originally cost £124.99)
 
Magpul Miad gen 1.1 grip, retail at £40.99,
 
Big Dragon steel AAC 51T flash hider and QD SCAR suppressor set, retails at £34.99 (original VFC flash hider included),
 
Elcan Specter 1x - 4x adjustable, with Docter mount (No Docter sight included, mount only), retails at £125
 
Element LA5-C UHP green laser version, retails at £54.99
 
Air Force One Atlas bipod, retails at £54.99
 
Element Tango Down style vertical grip, a little loose on the rail but does the job, retails at £10
 
Element M3X torch with pressure pad and IR lense cover, retails at £35
 
Set of Element SCAR rail covers, retails at £15.
 
VFC steel SCAR full length barrel extension, retails at £44.99.
 
Total retail value of £940.90.
 
Asking £550 including ParcelForce 48 shipping and PayPal fees.
 
No swaps and will only split accessories if the rifle goes first.
 
Item located in Snodland in Kent, will knock £15 off the price for collection.

Genuine Ergo Suregrip 2 in dark earth, was fitted to my MWS L119A2 build, but managed to source one of the original versions so this is now up for grabs.
 
In excellent condition, hardly used due to the build being a work in progress, so hasn't left the house and never skirmished.
 
No damage or marks of any sort and comes with mounting screw and the little bit that fills the gap between the grip and trigger guard.
 
£30 including postage and PayPal (Approx £7).
 
I am happy to discuss prices if you feel that I have over priced something, just please be aware that ALL of my advertised prices INCLUDE postage and PayPal fees, postage alone currently being £4.50 - £5.00 on a SMALL item, Second Class signed for, so please take that into consideration when making an offer, thanks.

Wosport Devtac Ronin style helmet, used but in great condition, never been skirmished and more of a display piece (Hence the dust in the pictures, apologies, will be cleaned before shipping out).
Fully adjustable for multiple head sizes, fitted with the black tinted lenses only, unfortunately misplaced the yellow and iridium style ones.
Anti fog fans are working and provide a nice bit of ventilation as well.
£40 including postage and PayPal fees of approximately £10.
 
 

Nuprol Glock 19 rotating paddle holster with Amomax molle adapter (Molle adapter currently fitted, original paddle included)
SHOULD also suit Glock models 19x, 17 and 18c, but cannot confirm 100 percent - £20 inc postage and PayPal.

4.5 inch barrel extension for M4, 14mm CCW.
Good condition, no scuffs or scrapes.
 
£10 including postage and PayPal.

4x Extended Pistol or SMG taco mag pouches in olive green.
Unknown brand but good quality.
Fit Marui MP7 magazines like a glove, would imagine MP5, UMP etc mags will fit also.
 
£30 for all 4x including postage and PayPal.

KWA Kriss vector package.
The rifle itself is in good overall condition with very few marks, has been well maintained and shoots as it should, no mechanical issues.
 
Internally it is fitted with a RA-Tech hard kick kit and RA-Tech RSD Evo II hop unit (this will need bedding in as it's not been used since fitting), comes with the Evo II long 6.01 barrel but this is unfitted as I wanted the option of removing the suppressor without having the inner barrel sticking out.
Also comes with an unfitted 3D printed gen 2 style pivoting trigger kit, and a pair of unfitted power down valves should it need them, I never had it chronoed so bought them just in case.
 
Externally it has a Speed airsoft magazine catch for easy reloading, defiance flip up irons, Magpul style foregrip, Inforce style rail mounted torch, G&P internally housed laser with pressure pad, Genuine Kriss Vector hand stop, grip plate and stock adaptor imported from the US, Magpul UBR stock with full trades and an Angry Gun QD sling mount. Also comes with an Angry Gun power up suppressor, custom flash hider, Eotech 552 replica and G&P AP red dot sight.
 
A total of 6 magazines, all gas tight and without damage are included, as are ALL original parts (folding stock, foregrip, laser housing plug, barrel thread protector, iron sights, grip plate, hop adjustment tool), extra cheek weld for the Magpul stock, box and manual, and will also throw in a pair of dual molle magazine pouches I had made specifically for the Vector magazines.
 
I'm really not in a hurry to get rid of this so no stupid offers, no splits and no swaps please.
 
£1100 gets you the lot, including UK shipping and PayPal fees. Any questions please feel free to ask.