mightyjebus

ahh that will be the PTW MP5

see top right

Actually really nice little GBB pistol. Adjusting the hop is a breeze as you put an allen key into the spring guide and turn left or right to adjust the hop. I like that it takes TM/KJW/WE mags as well. To keep the power down I'm using weaker gas. I chrono'd them today using Nuprol 2.0 and with .2 BB's I was getting around 330. The Glock X was around 310.

GBB's for this weekend. VFC MP5SD Tokyo Marui Mp7 VFC G19X

https://www.ebay.co.uk/itm/253854302589

it is but I'm using the TM stock for the battery. Modded it so that I can fit a lipo in the side of the crane stock.

Not quite what it seems like. Fake TM MK18 NGRS. Started life as an Army NGRS (copy of TM NGRS). I had a few TM parts floating around including upper and lower receiver. Ordered most of the MK18 parts from Aliexpress and had to mod the GBB sling plate to fit the NGRS. Internally it has a Gate Titan for NGRS fitted and flat hopped. FPS is around 330 and it's putting 28's out to around 65 meters. Only thing differnet is the pistol grip and that's because I find the A2 style pistol grip uncomfortable to hold long term and i's missing the side sling loop which is in the post. The flash hider came with the silencer and fits tightly to the front of the Mk18 rail.

TM Scar H

no idea how he managed to get to print as a solid block. as you can see in the picture they all printed fine for me. In regards to the other question this is a straight swap. nothing else needed to make it fit.

taking of scorpions I made these a while back. Think they are still up for download on myminifactory

might not look like much but this could be the answer to stop glasses from steaming up. 2 nozzles clip onto the side of the glasses and air is pumped across the inside of the lense keeping them from fogging up. This is a prototype and as I'm typing this the fan housing is in the printer. Hopefully it will work out.

working on a Seals loadout. Here's the AEG's so far. TM Sig 226 with Guarder metal upper and lower, Crimson trace laser grips, Threaded outer barrel and extended Magazine. VFC GBB MP5SD6 with torch and laser mount. I had tinker inside to get it working well but now runs like a train. TM SCAR H with 1x4 Elcan, PEC 15 with working light and red laser and Vertical grip (Just need to fit a titan and tightbore for this to be finished). TM HK416D in Tan. Various accessories and Titan and tightbore fitted inside. Stock pad is my 3D printed design for the battery.

latest buy...Tokyo Marui Glock 19 Side by side with a KJW G19 with full guarder upgrades.

A couple of Stoners.....

Picked up a second Evo (cheers Boominghedgie). Got plans for this one.

it's not ugly..you're ugly

aliexpress Linky

space gat

Celcius AKM

google sketchup which is free. takes a bit of practice to use it but there are plenty of youtube video guides. 3D printers can be bought for less than £200 now (in kit form) and I actually use these type of printers for all the stuff I do.

I designed and 3D printed it myself.

I always liked the CZ-58S but thought it lacked space to add a torch, etc for CQB. Off to the drawing board and a few hours later: now there is room for a torch or laser.

finished the Scorpion at last.

about 25 quid ...link.... and phase 2 has started on the evo scorpion

Fake. real on is on my L119A2