Will Lewer

My WAS DCS OD Plate Carrier arrived today! It was estimated to arrive 2 days from now on Saturday, so a bit surprised yet very happy to get it before my skirmish this Sunday! I really like it; it's very comfortable and I have it all adjusted so it fits me perfectly. Just need to look up how to attach the 3 Molle quick mag pouches that came with it as I'm a little unsure how to do that. Also trying to find a way to put a single point sling on it as it would look a little weird just over the top of the PC.

When I got my G&G GC16 last month it was shooting on average at 360 fps (tested on 0.2s at my local RFD). I was slightly worried before my skirmish as it would be over the site limit, however luckily it settled down and it now shoots at around 330 fps on 0.2s. Like others have said above, I think G&G guns take a while to settle down and after a thousand or so shots you should notice a very slight drop in the fps, so you should be ok.

Thanks! Will check them both out!

Just purchased my Warrior Assault Systems DCS OD Plate Carrier with 3 quick mags. Should hopefully be with me in a few days. This will be the beginning of my loadout (will try and get some A-Tacs FG clothing in the near future)! Also gonna get some velcro patches soon. Quick Q: Does anyone know where I can get a custom velcro name patch for cheap?

Ok I'll ask when I go next week. My site does have a shop but unfortunately they only sell weapon accessories and pyros.

Just a real quick UKARA question! When I went to my first skirmish last week and was signing in (my site requires that under 18s must be signed in by an adult), I saw people getting their stamps for UKARA. If I was to get one of my parents, when signing me in, to get a stamp and after the 3 games over the 2 months period gain a UKARA membership, would this be ok? I could then obtain a RIF as it would be a gift from one of my Parents. Not sure if I was very clear, so sorry if I'm not.

Haha the bottom one!

Yeah I guess so. It's too expensive for me to just go out and purchase a full loadout, so this loadout will probably take a few months to complete. I'm going to get my olive PC soon so whilst I'm saving up for other clothing, i'll probably just wear a black hoodie and olive coloured jeans underneath it.

Yeah I've done a little more searching on the net of inter and I think that an olive drag plate carrier will go well with an A-Tacs FG loadout, so I'll probably begin to develop that Edit: I've had a slight change of mind and am maybe going to purchase a WAS Elite Ops DCS OD plate carrier soon...

So I'm going to start to develop a loadout and I've found a plate carrier that I like and it looks like a good PC to build up on as it has plenty of velcro and MOLLE webbing straps. (http://www.military1st.co.uk/fy-vt-m001-od-flyye-fast-attack-plate-carrier-gen-1-molle-olive-drab.html). I really like the look of olive (drab) plate carriers but I don't want a loadout completely olive camo based, so is there any other camos that would perhaps 'go well' with an olive PC? Multicam? Woodland? Any help and opinions are appreciated!

I know what you mean, the screw shape is a little weird and it took me about 20 minutes to locate the correct screwdriver for it. Unfortunately I don't have UKARA so my only option was to get this in the snake tone - personally I prefer it to the Tiger pattern and it actually doesn't look too bad and from a distance it looks like an all black rifle! The photo for some strange reason has made it stand out a bit more. That's a bit strange for them to forget to paint it, lucky you though!

For the MOE rails I used a T-10 Torx screwdriver. I see you've also purchased a GC16; the dust cover leaver on my rifle does have a little wobble to it however I don't think it's anything to worry about. I've found that some reviews of the gun have mentioned about how loose the dust cover is, so it isn't just me and you!

All sorted for my first ever woodland skirmish tomorrow at Holmbush DOGTAG Airsoft (planning on going to the Epsom Tunnels sometime next week for my first ever CQC also)! My sight is zeroed, the hop up is adjusted nicely and all of my attachments are fitted and all mags feed well! Judging from the Facebook page, it looks as if there'll be at least 70 people there so it should be great! I'm optimistic that it'll be dry throughout the day, fingers crossed! :D

Cyma mid cap 140 round M4 mag and Nuprol 0.2 Diamond bbs

Madbull Noveske KFH sound amplifier and Emerson Surefire Ultra Scout M620U clone. Not really a 'just bought' post, more of a 'just received'. Anyway I have a skirmish this Sunday and also a CQB skirmish soon, so these should do me good!

- Half face black skull mask. - WE Nuprol mesh goggles. - Viper single point bungee sling. - Aimpoint T1 Black RDS. - MOE vertical grip. - Abbey silicone oil (learned/practised cleaning barrel yesterday after shooting and I removed a fair bit of 'factory gunk')!

Thanks a lot for the quick recommendations! I'll look into these sights more and will order one soon!

I might do the same!

Can anyone recommend me a good sight for my rifle? I've looked at the WE 881 holographic sight and Aimpoint T1 sight so far. Has anyone had experience with these? I'd say my budget is about £50

Well... It's slightly better finished than Chock's, yet it still isn't well done IMO.

Didn't have the time to post on Xmas Eve, but I got my rifle! It feels great and the two tone doesn't look too bad! (It's two tone only across the top of the rifle and from a distance it looks like an all black rifle). Haven't had the time to shoot it yet, however the battery is on charge and I plan to shoot it tomorrow morning! Also purchased some gloves, Blaster devil bbs and an extra mag and battery. Not long until my first Skirmish at Holmbush DOGTAG Airsoft in January, so you could say the rifle arrived just in time! (I'm considering purchasing some extra accessories for my gun as well as gear and maybe a secondary). Anyway overall I'm very pleased with my rifle and cannot wait to test it out tomorrow! Also Chock I think the flash hider is meant to be like that as mine is exactly identical to your photo (with the cut out). However, I agree that it's not a smooth finish and isn't well done (at first I thought it was a chip)! Although, I could be wrong and it could just be a coincidence that both of our flash hiders have been damaged.

Far too much chocolate, Iphone speakers and £200 to spend on rifle accessories, gear and possibly a GBB pistol.

Very nice! Expecting mine any day now!

Just purchased: - G&G GC16 Mod0 Limited Edition 30th Anniversary rifle. - Spare 300 round high cap mag. - Spare 9.6v battery and charger. - Viper drop leg magazine pouch. - Armoured half finger airsoft gloves. - Blaster Devil 0.25g Green bbs and ASG Blaster 0.23g bbs. Hopefully It all arrives around xmas time and I can attend my first Skirmish with it in January!

I do like the Limited Edition one and that's the one I'll probably end up going for (I also like the full metal '30th Anniversary' stamped receiver)! What I meant was that from reviews of this gun, people have said that it is amazing however the handguard on it feels cheap, it wobbles and the rails on it can chip. I'm obviously not going to replace it straight away and I may not even end up replacing it at all; I was just looking to see what other, more durable handguards will fit if this is the case.