Shinobi Posted May 7, 2013 Share Posted May 7, 2013 Hey guys im looking at a Magpul MOE Handguard, and I wanted to know what batteries will fit. What types (Crane,Mini,Twin,Stick etc) will fit? Also, what MaH will I need to last an entire day safely? 2000MaH+? Finally, will any of these specific batteries fit?http://www.actionhobbies.co.uk/3300-mAh-9-6v-Crane-Large-Pack-For-AEG-Guns_ATZDX.aspx#.UYkc2LUe2IUhttp://www.actionhobbies.co.uk/1600-mAh-9-6v-Ni-MH-Mini-Pack-AEG-Guns_APF0Q.aspx#.UYkc4rUe2IUhttp://www.actionhobbies.co.uk/2000-mAh-9-6v-Twin-Leg-For-AEG-Guns_A1AH4Q.aspx#.UYkcyLUe2IUhttp://www.airsoftworld.net/vp-9-6v-1600mah-nimh-mini-battery.htmlhttp://www.airsoftworld.net/vp-9-6v-1600mah-nimh-crane-stock-battery.htmlThanks! Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted May 7, 2013 Supporters Share Posted May 7, 2013 Mini fits nicely, unless you're mega trigger happy then a 1600mah battery will last all day. Link to comment Share on other sites More sharing options...
Supporters TPI Posted May 7, 2013 Supporters Share Posted May 7, 2013 Hey, I Have a Moe HandGaurd and i Can say a Mini 9.6V Brick will fit and a 8.4V Mini Crane should fit with some Jiggling. I'm Selling 3 Mini 8.4V's for £15 1 Is a Golden Eagle 1100Mah Vapex 1500Mah + a Zeroone 1500Mah all converted too Dean's so if you Just switch your Rifle and Charger to Dean's (60P Upgrade!) Link to comment Share on other sites More sharing options...
JRTIGHE Posted May 7, 2013 Share Posted May 7, 2013 LiPos and minis fit perfectly. I've got a large 3300mAh battery in my M14 stock and that lasts me a full day comfortably. Link to comment Share on other sites More sharing options...
Shinobi Posted May 7, 2013 Author Share Posted May 7, 2013 Hey, I Have a Moe HandGaurd and i Can say a Mini 9.6V Brick will fit and a 8.4V Mini Crane should fit with some Jiggling. I'm Selling 3 Mini 8.4V's for £15 1 Is a Golden Eagle 1100Mah Vapex 1500Mah + a Zeroone 1500Mah all converted too Dean's so if you Just switch your Rifle and Charger to Dean's (60P Upgrade!) What does deans do? Link to comment Share on other sites More sharing options...
Shinobi Posted May 7, 2013 Author Share Posted May 7, 2013 Thanks for your replies guys! I think i'll get one or two 9.6v 1600MaH mini's, unless you know of any 9.6v 2000Mah+ Minis? Link to comment Share on other sites More sharing options...
Supporters TPI Posted May 7, 2013 Supporters Share Posted May 7, 2013 This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg Link to comment Share on other sites More sharing options...
Silent7Sniper7 Posted May 7, 2013 Share Posted May 7, 2013 personally i'd suggest getting a Li-Po, 7.4v if your trigger happy & use high-caps get a 1450MaH at the minimum. Link to comment Share on other sites More sharing options...
Shinobi Posted May 7, 2013 Author Share Posted May 7, 2013 personally i'd suggest getting a Li-Po, 7.4v if your trigger happy & use high-caps get a 1450MaH at the minimum. Ok, cheers Mate ;D Link to comment Share on other sites More sharing options...
Hav0c Posted May 8, 2013 Share Posted May 8, 2013 I have an MOE handguard and i use a 7.4v,2600 mAh, 25c, 16Wh made by VP Airsoft and it lasts me a full day (I usually use just under 2000 bb's) on a 2 hour charge. Make sure you get a proper LiPo smart charger for one though as you risk burning it out. Oh, and the battery fits snug as a bug in a rug Link to comment Share on other sites More sharing options...
Shinobi Posted May 8, 2013 Author Share Posted May 8, 2013 This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg This is a Deans Connector they Improve ROF a Slither more and are more efficient than Tamiya's http://www.airsoftparts.ca/store2/images/modify-deans-connector-1.jpg Ok, thanks for telling me! Link to comment Share on other sites More sharing options...
Kaza66 Posted May 12, 2013 Share Posted May 12, 2013 I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ? Thanks Link to comment Share on other sites More sharing options...
Shinobi Posted May 12, 2013 Author Share Posted May 12, 2013 I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ? Thanks I am thinking of doing the same myself; will the fit in the MOE handguard: http://www.proairsoftsupplies.co.uk/acatalog/8.4V-1600mAh-cranestock-battery.-Mini-tamiya-7VP1600AFP_LL.html ? Thanks Should do I think... Might be able to find cheaper deals elsewhere... ;D Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.