Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2. AirTech

    Time Left: 6 days and 23 hours

    • For sale
    • Used

    Here's my Snow Wolf MP18 which I've decided to sell due to lack of use having moved away from playing Airsoft regularly. It's in really nice all round condition, I lightly sanded the lacquered finish on the wooden stock and polished it with some beeswax for a good shine - wood grain is clearly visible and looks great. The replica shoots at just under 340fps on a 0.2g BB, so should be suitable for use UK-wide. The r-hop patch allows you to use some quite heavy BBs and I've found this runs best on 0.30-0.32g. Internally it's had the following mods: • Gate PicoSSR3 inline mosfet, heavier gauge wiring and Deans connector • Steel ball bearing bushings • Rocket high torque motor (rebranded SHS) • ASG Ultimate mainspring • SHS air nozzle with o-ring • Silicone r-hop patch fitted to inner barrel w/larger hop nub Supplied boxed with manual as well as 6 midcap magazines holding around 120rd each. The base plate fell off one of the midcaps whilst playing last summer, so I made and fitted a replacement from 1mm steel plate. The satin black paint has started to flake off from use (pictured), but the magazine functions perfectly. Sold as seen with no warranty either given or implied. Thank you for looking!

    £285

    Gorebridge, Midlothian - GB

  3. ArranLH
    Saw this and thought it was near enough the brand new price, admittedly I couldn’t price up the mag inserts and glove clip but i can’t imagine they’d be much more on the total new price. He’s also stated a harness but owning this rig myself, I can tell you those are back straps and not a harness.
  4. ArranLH

    Genuine spiritus mk5

    ArranLH commented on C4llum's advert in Gear

    You’ve stated in the ad that it has a harness but I can’t see a harness, just two back straps?
  5.    DanielDefence reacted to a post in a topic: Warrington Airsoft Retail W.A.R
  6.    DanielDefence reacted to a post in a topic: Warrington Airsoft Retail W.A.R
  7. suedelvl

    Time Left: 6 days and 23 hours

    • For sale
    • Used

    Monkcustoms ESG-R MESSAGE ME ON WHATSAPP FOR MORE INFO (07399572310)

    £80

    Leeds

  8. L3nny3

    Time Left: 6 days and 23 hours

    • Wanted
    • Used or as new

    Looking for a few pieces, if you have any or multiple of the below I’ll gladly take them off your hands! after the following: Magpul RVG Grip Magpul BAD Lever Magpul/ Ergo etc rail panel any brand: Car15/ L119 stock pad Tangodown stubby grip HRF RCM / RAM magwell Surefire suppressor + 3 or 4 prong device RS Desert eagle grips (hogue etc) trademarked m203 (any size/ mount) please PM if willing to sell Thanks!

    NO VALUE SPECIFIED

  9. Today
  10. JLemon2217

    Time Left: 6 days and 22 hours

    • For sale
    • Used

    I bought this gun as a CQB gun in case I ever need one and I never did! So this gun just sits in the box not being used! This gun has had: new gears (standard ratio) replaced the trigger unit for the 2020 revisioned version which works so much better suppressor adaptor it shoots lovely on 0.8J with 0.28’s! looking for £350 with the 6 mags (there’s 5 in the photo but I need to find the 6th)

    £350

    - GB

  11. Colin Allen
    I don’t remember what mine cost; it was nine years ago.
  12. ttony1314

    Time Left: 6 days and 22 hours

    • For sale or swap
    • As new

    LNIB only test fired Upgrades BAV TAC titanium z plate Bav tac 140% nozzle spring Bav barrel nut tool Bav tac BavTacs Magic Hop Nub Maple leaf steel crazy jet inner barrel Flamingo hop rubber Like new without a mark on the exterior. collection from Leicester trades or PX possible for other GBBR. WhatsApp 07393187136

    £320

    Leicester - GB

  13.    Galvatron reacted to a post in a topic: Macks airsoft dreamers of the week thread
  14.    Austeyr reacted to a post in a topic: Macks airsoft dreamers of the week thread
  15. Lyndication
    That's a damning sentence right there
  16.    Galvatron reacted to a post in a topic: What grinds your gears on forums
  17. Bracie5150 left Positive feedback for LukeTunst
  18. Austeyr
    I paid £550 for mine 😉 It was 8 years ago but still 😂
  19. Dodgyback
    You've done a good job on the lower fence, I was gunna do that myself on a couple of builds in the past but never plucked up the courage. On another note, the later versions of the XM177E1 had a full fence lower receiver. There countless pictures showing this, and it would have still matched with the M16A1 traded lower which had it as standard. Unless you plan on filling these in also, like you did the selector markings on the opposite side? Nice work though.
  20. ButcherBill
    Mine cost £580.
  21. Austeyr
    https://prefired.co.uk/ads/ares-l1a1-slr-aeg £650 for a preowned, or £610 for one with warranty (Which you'll need with it being Arse, I mean ares) https://www.defconairsoft.co.uk/product/ares-l1a1-slr-aeg-black-ar-024-p Even Daves Custom Airsoft is cheaper! https://www.davescustomairsoft.co.uk/ares-l1a1-slr-aeg-polymer
  22.    andrey reacted to an advert: A&K VN M60
  23.    Colin Allen reacted to a post in a topic: LCT G3 DMR upgrade, V2 gearbox swap
  24. Colin Allen
    Well done to them; locking out via an ETU or mosfet should be acceptable. I know that the argument against is "But you can reprogramme it." However, how many sites actually check that DMRs really are mechanically locked?
  25. Jackioannou737 left Positive feedback for DeadByDawn
  26. AcseticGumby

    PPS K98k

    AcseticGumby posted an advert in Gas Rifles

    Time Left: 6 days and 20 hours

    • For sale
    • Used

    PPS K98k for sale. Shot about 30 times. And decided that albeit it's a lovely piece for a collection. It's not for me when it comes to actually playing. Comes with 5 mags, 1 of them as seen in a plastic wrapping, does need a new o ring where you fill with gas. The other are gas tight. Comes with a sling but it is for a gewehr 98 so it doesn't technically fit but does the job. Any questions lemme know!

    £400

    Cheddleton, Staffordshire - GB

  27. Ronin0033

    WE 1911 Mags x4

    Ronin0033 posted an advert in Parts

    Time Left: 6 days and 20 hours

    • For sale
    • Used

    WE 1911 magazines for GBB. All leak free. Previous owner has taken the black finish off but doesn’t effect function. £43.50 posted for all 4

    £43.50

  28. AcseticGumby
    AcseticGumby joined the community
  29.    Socks reacted to an advert: GHK DDM4 14.5 V3 tan cerekote
  30.    ButcherBill reacted to a post in a topic: The 'What have you just bought' Thread
  31. JRT
    JRT joined the community
  32.    Tommo92 reacted to an advert: Metal & Wood Trenchgun
  33. GiantKiwi
    Because everyone on HRC raves about them, I have bought: Waldo Dynamics MWS Hop adjuster arm and a pack of the Ion MWS return springs. Omega nub was a reasonable stop gap, but it doesn't work briliiantly, and the stock DE return springs are just poo.
  34. Socks

    DCA L129 Handguard

    Socks commented on Devlin's advert in Parts

    What threads are on the barrel nut, are they rs?
  35. Jalal

    Time Left: 6 days and 19 hours

    • For sale
    • As new

    Tokyo marui mws lower receiver complete. Fully working with no issues and it’s stock doesnt come with a stock and the selector will be standard great condition Internally 07599129298 thanks

    £150

  36. KeyboardWarrior
    KeyboardWarrior joined the community
  37. smallso

    Time Left: 6 days and 18 hours

    • For sale
    • As new

    Vector Optics Maverick - Has original packagaing - Has all accessories/mounts included - Lens clear and have no scratches - Glass watch crystal glued on as bb shield

    £45

  38. Lyndication
    Yeah same, the price is ridiculous. Mine has been great so far though.
  39. ButcherBill
    Sorry, I missed that.
  40. smallso

    VFC FNC

    smallso posted an advert in Gas Rifles

    Time Left: 6 days and 18 hours

    • For sale
    • As new

    VFC FNC - Has VFC Npas installed - Comes with 4 V3 mags - VFC FNC GBB Top Rail Optic mount Has original packaging

    £600

  41. Cannonfodder
    I was about to suggest a SADF M83 chest rig but then I googled them and saw how much they go for these days. If I'd known when I got mine they would up to quadruple in price I would've got more than 1
  42. Orange_06
    Orange_06 joined the community
  43. Austeyr
    A standard V3 AK gearbox should drop straight into it however I believe the motor cage may be proprietary to the NPO for how the stock is mounted. You will lose the selector ability (Should retain safety as it's physical?)
  1. Load more activity
×
×
  • Create New...