Rechargeable anti-mist fan unit with ducting and various mounting options, includes helmet mounting kit. New and unused, selling as moving abroad! £35 incl fees and P&P via PayPal.

Clear-View Anti Mist System

The clear-view system works by increasing the airflow around your eye pro. The high flow of air means we don’t need to insert ducts into your goggles, saving cutting holes in the seals.

For Fast-Helmet wearers we have a distribution rim that attaches to the helmet so a curtain of cool external air is blown over your face and eye pro. The curtain of air provides the increased airflow around your eye pro to stop it misting up.

We also have a set of ducting clips for wearers of Bolle Tracker II’s or Sawflys. These clip onto the frame with no drilling or glue. The directed air flow from the system into the sides of the lenses keeps these common and cheap safety glasses clear of mist.

Should you be using the standalone ducting, the ducts should be aligned with the air holes already present in your eye protection for this system to work.

The system uses the common 18650 rechargeable Li-ion battery which will power the system for over 20hrs on one charge. The system has inbuilt discharge and charge protection circuits for the safety of the end user. By having an accessible construction and using the 18650 battery. We allow the end user to replace the battery should it wear out with ease even after years of use.

Features

Powerful air flow provides clearing air without needing accurate duct placement.

Large diameter ducting allows for quiet, but powerful demisting.

Directional airflow attachments allow for flexible arrangement of ducting on fast helmets and Bolle Tracker II’s and Revision Sawfly’s (Support for other eye protection models in progress and by request).

Light-weight construction,

On/Off Switch

Replaceable rechargeable Li-ion battery with Micro USB cable charging (Cable not included).

Whats Included

Clear-view fan system,

Two strips of 25mm wide 80mm long sticky backed hook side Velcro,

1m of 10mm OD, 8mm ID PVC ducting.

FAQ

BB Impact Resistance

The fan system is not designed to be shot at. The casing is reasonably robust but not intended to take a 2.3J Sniper or 1.1J DSG at point blank. Plus it will generally be mounted on the back of the head. So if it is getting shot it probably means you are running away so had it coming. We will offer replacement cases at a significantly discounted rate should you need.

Weather sealing

In the end we are sucking air into a fan and blowing it down tubes. It would be crazy to expect any significant weather proofing. The case will hold off the worst in a light shower but that’s the best you can do with the design concept. If you are planning on playing in particularly bad weather mounting the system in a NVG counter-weight pouch is recommended.