⚙️ EX_MACHINA Custom AEG Battle Rifle ⚙️
⚙️ EX_MACHINA Custom AEG Battle Rifle ⚙️
£650
-
Advertiser
- Feedback 0 0 0 - Rating 0%
- Type of Advert For sale
- Item Condition Used
- Time Left This advert is COMPLETED!
- Quantity 1
Description
Custom built from the ground-up and down to the screws, this is a truly unique high-end system with incredible range/accuracy and overall performance. There was no base system or donor gun, every part was selected to build a one-of-a-kind machine!
Along with some testing the current internal setup was fielded once for approx. 4 hours/2000 rounds at an outdoor skirmish event (25/06/22) and it absolutely dominated the event; so much so that the rifle was “randomly” chronographed and then ghosted by a marshal following concerns from other players (including a few 500FPS snipers) about it being 'hot' due to the effective range. Rifle was previously used in different configurations for testing/validation but has seen less than 10,000 rounds TOTAL.
Brilliant trigger response thanks to the WARHEAD Brushless Motor, GATE TITAN Advanced and MAXX CNC Trigger (short pull) with a 20RPS rate of fire that is easily capable of keeping enemy players suppressed. Currently programmed for SEMI – BINARY – AUTO but can be altered upon request (or by yourself if you have the USB LINK).
Custom Black / Gold CERAKOTE finish that is eye catching and just lovely. Some wear and tear, nothing major but there are a few scratches around the receiver pins, castle nut and a few other places you’d expect battle scarring; it's not "brand-new in box" perfect but it hasn't been through the wringer by any stretch, a perfect example of used/very good condition.
>> 0.2g @ 335FPS +/-2 and 0.32g @ 265FPS +/-2 << FPS consistency is phenomenal as shown in the included chronograph photos.
PARTS LIST (All parts marked with '#' are brand new and essentially unused):
Externals
• PTS ZEV 9.5” CNC M-Lok Rail
• LAYLAX VECTOR Thread Protector
• SLONG Type 5 Outer Barrel Extension
• G&G ARP556 Outer Barrel Base
• G&G MBR556 G2 Receiver Set
• G&G Advanced Selector Switch (Short) #
• CYMA Extended Mag Catch
• KRYTAC Defiance Grip #
• KRYTAC Sling Plate
• KRYTAC Buffer Tube
• MAGPUL CTR Stock (Genuine, wire route cut into side)
• MAXX CNC Trigger Titanium (Short pull)
Barrel Assembly
• EdGI 255mm 6.04mm Lapped Steel Barrel (Custom EXM Spec)
• TRU-HOP Bucking #
• MAXX CNC Hop Chamber (Shimmed)
• EXM Barrel O-Rings #
Gearbox
• G&G G2 Gearbox w. EXM SCREW KIT
• SHS CNC Nozzle w. EXM VITON O-RINGS #
• SHS CNC Cylinder Head w. EXM VITON O-RINGS #
• SHS CNC Cylinder #
• MODIFY POM Piston Head w. EXM VITON O-RING #
• RETRO ARMS CNC Spacer #
• CYMA FMR Piston #
• PROMETHEUS Main Spring #
• EXM Spring Guide Spacer #
• G&G Tappet Plate #
• GUARDER Tappet Spring #
• SHS CNC Sector Gear w. FPS Delay Chip #
• KRYTAC CNC Spur Gear #
• SHS CNC Bevel Gear #
• FPS / RETRO ARMS CNC Bushings #
• EXM Polished Shims #
• LONEX Anti-Reversal Latch #
• GATE TITAN Advanced (Less than 10,000 rounds TOTAL)
• WARHEAD BLACK 30k Motor w. SHS Pinion
• CERAKOTE Black / Gold
THIS RIFLE WAS BUILT WITH EX_MACHINA'S UNRIVALLED AEG SERVICE AND TUNING PACKAGE AS DETAILED BELOW:
• Full disassembly and cleaning of the entire weapon system.
• Gearbox radiused to reduce probability of stress fractures.
• Piston Rails polished to reduce friction and improve consistency.
• Cylinder polished to reduce friction and improve compression.
• Bushings mounted to prevent movement and improve reliability.
• Motor height set to optimise energy transfer to gears.
• Sector Gear modified to improve nozzle timing and compression w. FPS SOFTAIR Delay Chip.
• Sector Gear modified to improve cycle timing and trigger response.
• Gears shimmed to improve performance and reliability w. EX_MACHINA Polished Shims.
• Piston modified for ideal angle of engagement (AOE) w. RETRO ARMS CNC Spacer.
• Piston Head modified for improved compression.
• Piston Rack modified for improved Sector Gear engagement.
• Piston Rack mounted to piston for improved reliability.
• Piston Head, Cylinder Head & Nozzle O-Rings replaced w. EX_MACHINA VITON O-Rings.
• Tappet Plate modified to improve nozzle timing and compression.
• Tappet Spring modified to improve nozzle timing and compression.
• Hop Chamber shimmed for improved accuracy and consistency.
• Numerous additional tweaks and modifications for maximum performance.
• Gearbox lubricated w. SUPER LUBE Syncolon Grease & EX_MACHINA Silicone Oil.
• OEM screws replaced w. EX_MACHINA Screw Kit.
• MOSFET configured to optimal settings.
• Balance FPS and Joule output for maximum effective range.
• Detailed reassembly of Hop-Up & Barrel
• Detailed reassembly of Weapon System.
• Comprehensive testing of Weapon System on 100m range w. NUPROL RZR BBs.
Cost to have something like this built would be approx. £1,300 not including labour charges for the incredibly detailed tuning and assembly work that this rifle has received.
Optimised for 0.32g BB / 11.1v LiPo / PTS EPM Mid-Cap. Lower BB weights (min. 0.28g) can be used but 0.32g perform brilliantly and are recommended / 7.4v LiPo can be used but will reduce trigger response and ROF / EPM1s can be used but must be correctly bedded and filled to 200rds maximum. Will arrive with hop set for 0.32g BBs.
Recommend using "TURNIGY NANO-TECH 11.1v 1200mAh w. DEANS", this will fit fully in the buffer tube and allow the stock to collapse all but one notch (Photos show rifle with battery installed). However, any 11.1v LiPo will be suitable, you would just need to figure out storage.
INCLUDES 6-MONTH ‘PARTS AND LABOUR’ WARRANTY PURSUANT TO EX_MACHINA TOS: https://exmachina.uk/terms-of-service
PTS EPM NOT INCLUDED, for illustrative purposes only.
-- POST OR COLLECTION --
Specs
-
Make
EX_MACHINA
-
Model
CUSTOM
-
FPS
0.20g @ 335 / 0.32g @ 265
-
Accessories
AS LISTED
.thumb.jpg.849286bd3c4ee8d6e7c1e8b2498bc267.jpg)
Recommended Questions