Jetson-82

Pact club timer 3 for sale new in box only used once. Good to use with louder RIF will struggle with HPA due to low sound. Wanting £150 for it p&p Inc. Will post overseas but postage will come at a cost.

Trouser have been worn once for a 40 min game (washed). Size is medium. Description "SARatov" summer trousers are combat trousers of the Gen 3/4 format, designed to be worn in hot and temperate climates. "SARatov" trousers are made of wear-resistant breathable and hygienic NyCo rip-stop fabric. The lower back, gusset and the area around the knee are made of elastic and durable spandura in the color of the main fabric. Combat trousers have 6 roomy pockets, a waist adjustment system is located on the belt, allowing them to be used without a trouser belt. There are two D-shaped plastic rings on the belt loops for attaching accessories. The knee pad is adjusted horizontally and vertically above the knee and on its side, and there are ventilation valves on the back. Inserts of the Gen 3/4 type, including those with ballistic protection, can be installed in the knee valve. The trousers have an ankle adjustment. Featured Details Built-in waist adjustment system. Elastic sections on the lower back, gusset and knees in the color of the main fabric. Six roomy pockets. Ankle adjustment. Ventilation valves. It is possible to install conventional and ballistic knee pads of the Gen 3/4 type. Fly with Canadian buttons. Basic NyCo fabric (nylon+cotton), optimally suited for hot and temperate climates. Horizontal and vertical adjustment of the knee pad. Materials Polyamide 100% AO Lenta ® (Russia) Knitwear - 97% polyester 3% elastane NyCo - Nylon 50%, Cotton 50% Multicam, Olive (South Korea) NyCo - Nylon 50%, Cotton 50% Moss, EMR-Leto Baltex (Russia) Polyacetal 100% Special Kit ® (Russia) Contact tape: Nylon (polyamide) 100% VELCRO ® (Belgium) Asking for £50 + £5 p&p

What i have for sale is a very nice and clean set of paraclete releasable molle vest. Item come from Special forces support group (SFSG)in a non issued condition (new with no labels) the pouches are in good order and some are new. This type ofplate carrier was used heavily in the mid to late stages of Iraq and in Afghanistan with OMLT working with ANSF in Helmand. The rig is in XL and has NO ballistic inners. A good rig to copy TF Black or early SFSG. I'm asking for £150 + £10 p&p I am open to swap for a decent AVS plate carrier or JPC 2.0 Plate carrier replica. Postage abroad will be alot more and all legal requirements will need to be sorted by buyer.

options What I have for sale is a almost new ( only used once) smg, bought this as a impulse buy and only selling due to having and owning a smg similar to this (tm mp7). The write up from patrolbase.com which I bought it from. 2 Magazines included VORSK's first GBB SMG platform Quick Detachable suppressor included The VMP-1X is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1X makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor and mounting system built into the muzzle itself. Our VMP-1X SMGs have now arrived and are ready for dispatch, no need to hold your breath any longer! If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1X is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower! I'm asking for £210 + £10 p&p I am open to swap for a decent aa r36 or we g36, also interested in 416 or mk18 aeg RIF Postage abroad will be alot more and all legal requirements will need to be sorted by buyer.

What I have for sale is the arcturus m4 spr, a rif I have only zeroed and intended to use as a DMR/SPR but never had the chance to use due to my game play. The rif is stock and basically brand new in the box,never skirmished and is pushing out 345fps on .20. Here is the write up for the rif: Full metal construction 6.03mm Tightbore inner barrel 17.5-inch Outer barrel - Perfect for a DMR build If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it. On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup! What you see in the pic is what you get. Original stock has been replaced with a high rise stock and sprayed in krylon (easy to remove). Prefere collection as p&p will be around £15 mark due to weight, but will post at buyer's expense Open for swaps, looking for a gbbr m4 carbine type. Or a decent plate carrier, Ferro concept,agilite k zero/19 or WAS at a push

What I have for sale is the arcturus m4 spr, a rif I have only zeroed and intended to use as a DMR/SPR but never had the chance to use due to my game play. The rif is stock and basically brand new in the box,never skirmished and is pushing out 345fps on .20. it will come with a spina optics sight (3-9×32),a real steel/ptw stock (for bigger batteries),a 1200mAh lipo 7.4v battery and a FMA USSF suppressor with markings. The package comes as a starter DMR set up+ and ready to field. I'm open for swaps, looking for a gbbr m4 carbine also would swap for a decent plate carrier ferro concept,agilite ect... Would prefer collection as p&p is expensive (insurance) but can deliver at buyer's expense. Here is the write up for the rif: Full metal construction 6.03mm Tightbore inner barrel 17.5-inch Outer barrel - Perfect for a DMR build If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it. On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

What I have for sale is the arcturus m4 spr, a rif I have only zeroed and intended to use as a DMR/SPR but never had the chance to use due to my game play. The rif is stock and basically brand new in the box,never skirmished and is pushing out 345fps on .20. it will come with a spina optics sight (3-9×32),a real steel/ptw stock (for bigger batteries),a 1200mAh lipo 7.4v battery and a FMA USSF suppressor with markings. The package comes as a starter DMR set up+ and ready to field. Here is the write up for the rif: Full metal construction 6.03mm Tightbore inner barrel 17.5-inch Outer barrel - Perfect for a DMR build If you are planning a DMR build you have one more base gun to consider, thanks to ARCTURUS! The M4/AR-15 SPR Rifle boasts a lengthy 17.5-inch outer barrel and 15-inch M-LOK handguard, making it the perfect length for SPR/DMR duty. The M4/AR-15 SPR is remarkably light for a full metal rifle of its size and offers a wealth of accessory options with its M-LOK handguard and seamless handguard receiver rail integration, meaning if you want a huge optical sight you have plenty of room to mount it. On the inside, the M4/AR-15 SPR is equipped with the same rock solid internals as ARCTURUS's other designs, with many parts which lend themselves to a DMR build already installed, including a 6.03mm tightbore inner barrel made from steel for extra rigidity. Whether you are keeping full auto for a proper SPR, or going for a high FPS DMR build and saying goodbye to the fun mode, the M4/AR-15 SPR is a great base gun for any long range oriented setup!

A really well made rig and almost identical to the original but at a lower cost. The rig is brand new never skirmished. Colour is close to ranger green and one size fits most. As you see in the picture can fit multiple sized mags (nulpro m4,MAG AK74,systema m4, gas glock and pts erg m4). Mags not included. Cost includes p&p Paypal ready

HAO MK16 M-Lok 9.3" handguard and nut are basically brand new and only fitted to my stw before it decided to die. Handguard Is well made and has realistic markings. Asking price is £70 Inc p&p

What I have for sale is a collection of PTW magazines. All in good working order. Sale consists of: 4x real and marked systema m4/m16 120rd hw magazines 3x [MAG] m16vn 90rd magazines. Reason for sale, I was sold a dud rifle on this forum. The rifle failed but the mags works can't get my money back due to no reply from seller. Asking price is £150 Inc p&p

What I have for sale is clone of the systema ptw series. I bought this second hand on here a couple of months ago and was working really well, I recently changed the spring then it stopped working, I have asked on the forum for any ideas ranging from fuses to striping it down but I am no airsoft tech and definitely not a electrician so didn't do anything to it. The original handguard I have got rid of and replaced it with a mk16 (on sale separately). The sale is for a non working rif with NO handguard in original box. Asking for £130 ono Inc p&p Paypal ready