SKYHAWKXx Posted October 18, 2011 Share Posted October 18, 2011 Hello, i am basically new to airsoft but after going for my birthday and i really want to get onto it. I have since purchased a Two Tone HFC VSR-11 with a scope and rails. I am now looking to improve the performance because it doesn't feel powerful enough out of the box to jump straight into a game. Does anyone know how to upgrade this gun from the box and if so what are the parts i need and how could i do it. Using airsoftworld.net or other sites which are cheaper for parts. Thanks for your help. Anything is appreciated. Sky Link to comment Share on other sites More sharing options...
Supporters Liam Porter Posted October 18, 2011 Supporters Share Posted October 18, 2011 I'm going to recommend a site that I used to upgrade my sniper (L96), http://www.airsoftsniperparts.com/ The upgrades on there are a lot better than stock parts, but not as expensive as LayLax/PDI parts. Link to comment Share on other sites More sharing options...
Supporters TPI Posted October 18, 2011 Supporters Share Posted October 18, 2011 First off put the hairy danglers in ice because you just kicked yourself their. Well it takes exactly the same upgrades as a vsr 10 by TM so off you trek but if by the end you have not spent 500 quid you aint done So 1.Barrel 2.hop 3.reinforced sears 4.barrel spacers 5.new FPS spring 6.Realise sniping is boring and get an AEG! Link to comment Share on other sites More sharing options...
SKYHAWKXx Posted October 18, 2011 Author Share Posted October 18, 2011 I'm going to recommend a site that I used to upgrade my sniper (L96), http://www.airsoftsniperparts.com/The upgrades on there are a lot better than stock parts, but not as expensive as LayLax/PDI parts. Thanks i'll give it a look now Link to comment Share on other sites More sharing options...
dazz Posted October 22, 2011 Share Posted October 22, 2011 From what i've been told, only the VSR Sears are compatible with the VSR-11 ? The cylinder internals are similar to APS2? Link to comment Share on other sites More sharing options...
Supporters Rock-climby-Dave Posted October 22, 2011 Supporters Share Posted October 22, 2011 Cylinder internals are PSS10 VSR sears are VSR sears, and only VSR Sears will fit, unless you drop £200 on the Laylax zero trigger Link to comment Share on other sites More sharing options...
dazz Posted November 4, 2012 Share Posted November 4, 2012 Just to confirm (necro post here sorry) - Then HFC VSR-11 is fully VSR compatible. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.