Rickwales Posted Saturday at 18:56 Posted Saturday at 18:56 (edited) Hi all. I'm still having fogging issues when playing Airsoft. It's getting me down as I just can't see anything, especially as I wear glasses underneath them. I've brought the above mask and an exfog unit. It has the double pain lenses, but someone at Airsoft today said I can get mesh lenses for it? I can't find any online though. I've tried antifogging sprays but they still don't make much difference for very long. Can anyone please make any suggestions, I used a grill mask thing today but my glasses still streamed up but not as bad. I'm basically half blind at the moment and a walking target.. Had so many headshots today I look like I have small pox. 😆 Many thanks. I'm debating cutting out most of the foam. Would that help and be safe? Edited Saturday at 18:57 by Rickwales HZR13 1
Cannonfodder Posted Saturday at 19:08 Posted Saturday at 19:08 (edited) Possibly a silly question but did you still use the anti fog on your glasses when using the mesh mask? Also what anti fog spray are you using? I've found some work far better than others. I'm not familiar with that particular mask so I can't 100% say it's safe but any foam you do remove will help airflow. Just make sure any holes left behind won't let a bb through Edited Saturday at 19:10 by Cannonfodder Rickwales 1
Rickwales Posted Saturday at 19:13 Author Posted Saturday at 19:13 (edited) Thank you for the reply, yes I still used the spray. I let it dry thn buffed it as advised. I tried the spit technique before that without any luck. 😆 Any suggestions on a brand? I'll try anything right now. It's full face, and has good ear and face cover. I'll try and remove a bit of foam where it looks safe. Thanks again. Edited Saturday at 19:14 by Rickwales
Cannonfodder Posted Saturday at 19:29 Posted Saturday at 19:29 No worries. My go to brand of anti fog is called cat crap. It comes as a paste in a red tub. Simply rub it onto the lens, buff it a bit then wipe off with a cloth. It should cost ten to fifteen quid for a small tub but I find it lasts ages as you only need a little at a time Rickwales and HZR13 1 1
ButcherBill Posted Saturday at 19:34 Posted Saturday at 19:34 Thinking outside the box moment but... try playing without wearing any hats/ helmets/ bandana's/ wigs/ knotted hankies etc, see if it helps. Rickwales 1
Rickwales Posted Saturday at 20:09 Author Posted Saturday at 20:09 31 minutes ago, ButcherBill said: Thinking outside the box moment but... try playing without wearing any hats/ helmets/ bandana's/ wigs/ knotted hankies etc, see if it helps. Thanks, yep I tried that today, and have the scars and bruises to show for it. We play in forest and scrub land and I kept getting minor cuts and scrapes from branches and of course the head shots 😆. I also stripped off most of my layers. I wasn't hugely active and running about either. I'm 50 and my back was sore. It was a particularly humid day though. As had rained and them sun came out. Thanks again. 40 minutes ago, Cannonfodder said: No worries. My go to brand of anti fog is called cat crap. It comes as a paste in a red tub. Simply rub it onto the lens, buff it a bit then wipe off with a cloth. It should cost ten to fifteen quid for a small tub but I find it lasts ages as you only need a little at a time I'll order some now. Thank you. HZR13 and ButcherBill 2
Cannonfodder Posted Saturday at 20:14 Posted Saturday at 20:14 Unfortunately staying still is the worst thing for fogging as when you're moving air circulates round you better Rickwales 1
Rickwales Posted Saturday at 20:17 Author Posted Saturday at 20:17 I'll bear that in mind, there was little wind today either which probably didn't help. Not my best day of Airsofting, fell over a few times and took a lot of hits. Son and his mates enjoyed it though. Thanks again HZR13 1
Rickwales Posted Saturday at 20:45 Author Posted Saturday at 20:45 I've took it apart and removed some of the foam and adjusted the exfog pipes. I was sat in the middle of the lounge floor away from all the furniture and I've still managed to lose a screw... Wot the fuk... I've even stripped off and searched under the sofas. Even got my son to look. 😆 HZR13, Cannonfodder and ButcherBill 3
ButcherBill Posted Saturday at 21:15 Posted Saturday at 21:15 29 minutes ago, Rickwales said: I've took it apart and removed some of the foam and adjusted the exfog pipes. I was sat in the middle of the lounge floor away from all the furniture and I've still managed to lose a screw... Wot the fuk... I've even stripped off and searched under the sofas. Even got my son to look. 😆 Dude, you're 50, are you seriously saying you don't have a garage, shed or drawer in the kitchen full of screws(just in case)? Rickwales 1
Colin Allen Posted Saturday at 21:52 Posted Saturday at 21:52 2 hours ago, Cannonfodder said: No worries. My go to brand of anti fog is called cat crap. It comes as a paste in a red tub. Simply rub it onto the lens, buff it a bit then wipe off with a cloth. It should cost ten to fifteen quid for a small tub but I find it lasts ages as you only need a little at a time Cat Crap is excellent, as is Absolutely Clear; it was recommended to me by my eldest, who uses it when diving. Rickwales 1
Rickwales Posted Saturday at 22:07 Author Posted Saturday at 22:07 51 minutes ago, ButcherBill said: Dude, you're 50, are you seriously saying you don't have a garage, shed or drawer in the kitchen full of screws(just in case)? 100% I do. But not that size... 😆 ButcherBill 1
JVacation Posted 21 hours ago Posted 21 hours ago To be honest contact lenses are the best way to go. They are a pain when you first get into them but after a month or so they're easy to get in and out. The run a pair of herosharks and you'll forget fogging exists Rickwales 1
Rickwales Posted 20 hours ago Author Posted 20 hours ago A few recommended that to me yesterday, unfortunately I have tried them several times in the past without success. I just couldn't take to them. I have several eye issues, and glasses suit me as I'm rather ugly... 😆 Colin Allen and HZR13 2
Enid_Puceflange Posted 1 hour ago Posted 1 hour ago (edited) Away back in my Paintballing days (90’s) New JT Thermal lenses came fitted with a protective polythene layer on the inside side of the lense Dont known as if they still do, but have a look, and remove it It used to seriously impede the anti fog performance I used to wear glasses under mine, and it was only them that would sometimes mist up Edited 1 hour ago by Enid_Puceflange
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now