Wegalaxy Posted June 28 Share Posted June 28 Hello, After re lubing my ct-25 base plate magazine o ring and reinserting it. It holds gas but after shooting it begins to leak slowly again. Im assuming I need to replace the o-ring as it dosent seem to fix the problem re lubing it. I have found the replacement part, but it seems a little steep for an o-ring. Can anyone recommend a uk seller for this o-ring or the specific o-ring that will fit the ct-25 magazine base place. (its a pretty long and narrow o ring.) Thanks The o-ring https://www.kyairsoft.com/we-ct25-a66.html Link to comment Share on other sites More sharing options...
Shamal Posted June 29 Share Posted June 29 I bought a set of 255 assorted o rings from eBay. £4.99. It's a great set and contains pretty much any size o ring that you would need for Airsoft guns. I have repaired lots of gas mag with them including the ring around the base block. There are o rings that fit the gas valves and knocker valves as well. I don't think you need to buy the specific part mate. Save some money and get a set that will do everything,👍 nighthawkkhan 1 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted June 29 Supporters Share Posted June 29 Worth trying it with some lower pressure gas, i found anything stronger than nuprol 2.0 the mag just ain't fond of. Link to comment Share on other sites More sharing options...
Wegalaxy Posted June 29 Author Share Posted June 29 Hello, I'm going to try new o rings first. If it doesn't work. I'll try the weaker gas. Is that "blue gas"??? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now