OH NO CT-25 magazine base plate o-ring still leaking

[Wegalaxy]

Hello,

After re lubing my ct-25 base plate magazine o ring and reinserting it.

It holds gas but after shooting it begins to leak slowly again.

Im assuming I need to replace the o-ring as it dosent seem to fix the problem re lubing it.

I have found the replacement part, but it seems a little steep for an o-ring.

Can anyone recommend a uk seller for this o-ring or the specific o-ring that will fit the ct-25 magazine base place.

(its a pretty long and narrow o ring.)

Thanks 

 

The o-ring

 

https://www.kyairsoft.com/we-ct25-a66.html

[Shamal]

I bought a set of 255 assorted o rings from eBay. £4.99.

It's a great set and contains pretty much any size o ring that you would need for Airsoft guns.

I have repaired lots of gas mag with them including the ring around the base block. 

There are o rings that fit the gas valves and knocker valves as well.

I don't think you need to buy the specific part mate. 

Save some money and get a set that will do everything,👍

[Adolf Hamster]

Worth trying it with some lower pressure gas, i found anything stronger than nuprol 2.0 the mag just ain't fond of.

[Wegalaxy]

Hello, 

I'm going to try new o rings first.

If it doesn't work. 

I'll try the weaker gas.

Is that "blue gas"???

Thanks