LazzurusMan Posted March 28 Share Posted March 28 So today I'm picking up an evo bolt and ra-tech npas for my noveske. I've searched online and YouTube, but I cannot find a decent video of how to properly fit an npas. Half the videos have all the bits I need to know being done under/out of the cameras view, the other half are from East Asia and unfortunately I can only speak the one language and they don't have subtitles. Can anyone give me a breakdown or link me a tutorial on how to fit an npas correctly? If I can't figure it out in a few hours I'll have to get the angrygun bolt (comes with npas pre fitted) and I'd rather avoid angrygun. Link to comment Share on other sites More sharing options...
Nick G Posted March 28 Share Posted March 28 I cant speak for the MWS as my GBBR's are mainly WE but I'm sure it's not much different. Remove the loading nozzle from the bolt carrier, on the WE there is a pin visible on the bolt which secures the return spring. Ant nozzle guids also need to be removed. Once out you need to open the nozzle, again on the WE there is a pin half way along the nozzle that secures thhe front and back together and locates the return spring. Take the valve and it's spring out of the nozzle, replace the valve with the NPAS,( note orientation needs to be the same as the original valve, ) and reuse the valve spring. Then re assembley is as they say , the reverse . Link to comment Share on other sites More sharing options...
gavinkempsell Posted March 28 Share Posted March 28 (edited) You'll get a QR code with your npas & the link will show you how to fit it. Plenty video's on YT too. Edited March 31 by gavinkempsell Nick G 1 Link to comment Share on other sites More sharing options...
Madhouse Posted March 31 Share Posted March 31 I remember watching a YT vid before I did mine but can’t find it right now. It was all pretty straight forward though, what took the most time was adjusting it to get the joule output that I wanted. Nick G 1 Link to comment Share on other sites More sharing options...
LazzurusMan Posted April 2 Author Share Posted April 2 Ended up getting an angrygun bolt with mpa for now. Seems pretty consistent so far, and it's way lighter than the stock bolt. Just LOTS of tiny adjustments to get to 1.13j on .32 with red gas. Link to comment Share on other sites More sharing options...
Ryan James Posted April 2 Share Posted April 2 Jaeger Precision and Ollie Talks Airsoft both have videos about stripping and assembling bolts on their YouTube with everything you need Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now