craig Posted July 21, 2011 Posted July 21, 2011 right so ive just installed a new spring into my tm m4 ris and ive put it back together and its not working i think it's the motor as it spins grand out side the grip but not when its inside can some one please help as i need it ready before friday so please help
Supporters M_P Posted July 21, 2011 Supporters Posted July 21, 2011 Have you adjusted the motor height
AF-UK Founding Member Deva Posted July 21, 2011 AF-UK Founding Member Posted July 21, 2011 You may have knocked it or something so might be worth trying.. I'm assuming if it was too tight the motor wouldn't be able to turn?
Supporters M_P Posted July 21, 2011 Supporters Posted July 21, 2011 Ok well on the bottom of the pistol grip there will be a large flat head grub screw, don't do it all the way up, loosen it till it works. Yea dev, if its too tight the motor won't turn at all
craig Posted July 21, 2011 Author Posted July 21, 2011 its still not working now this is really starting to piss me off what about the anti reversal thing would that lock the gears and the motor in place?
Supporters Liam Porter Posted July 21, 2011 Supporters Posted July 21, 2011 Is it doing anything or making any sound at all? My M4 had similar problem to this, I took it apart to fix the mag release, motor span fine out the gun, but once back together, it did nothing, just clicked when I pulled the trigger..
Supporters Liam Porter Posted July 21, 2011 Supporters Posted July 21, 2011 It was my batteries causing the problem. No idea how. I tried different ones, works fine now.
craig Posted July 21, 2011 Author Posted July 21, 2011 yeah its not the batteries now since i put i back to the way it was you can hear the motor spinning but thats it
AF-UK Founding Member Deva Posted July 21, 2011 AF-UK Founding Member Posted July 21, 2011 You can hear the motor spinning when its fitted inside the gun?
AF-UK Founding Member Deva Posted July 21, 2011 AF-UK Founding Member Posted July 21, 2011 Sounds like you need to tighten the motor height adjustment screw. Previously we said to loosen it because you couldn't hear it inside the gun so you've gone too far by the sounds of it.
craig Posted July 21, 2011 Author Posted July 21, 2011 i didnt adjust yet i just put it back together for the twentieth time since 9 this morning thanks for every ones advice im planing to take it to my site tomorrow and see if they can fix it because ive gave up and im away for a smoke or fifty thanks
trigger_finger Posted October 12, 2011 Posted October 12, 2011 i didnt adjust yet i just put it back together for the twentieth time since 9 this morning thanks for every ones advice im planing to take it to my site tomorrow and see if they can fix it because ive gave up and im away for a smoke or fifty thanks 1. Maybe the gears are too tight inside (lock up). Have you touched/removed & replaced the shims? Maybe a shimming problem. 2. Have you reconnected the wiring terminal correctly in the motor terminal (positive wire should be on the Red motor terminal and negative on the other). The motor will still spin if the wiring is reversed outside the pistol grip but won't spin your gears if its inside. ooops.... just realised i made a necropost
craig Posted October 12, 2011 Author Posted October 12, 2011 fixed it sold it and bought a minimi but thanks any way
Recommended Posts
Archived
This topic is now archived and is closed to further replies.