Jump to content

not firing


roger_37
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Have you actually cocked it?

you need to pull the charging lever backwards out of the gun to load the first bb and load the spring with pressure to start firing when you pull the trigger

switched the safety to “fire”?

got the magazine all the way into the grip properly?

checked that the semi/full auto selector is t somewhere in between?

Edited by Enid_Puceflange
Link to comment
Share on other sites

10 minutes ago, Enid_Puceflange said:

Have you actually cocked it?

you need to pull the charging lever backwards out of the gun to load the first bb and load the spring with pressure to start firing when you pull the trigger

switched the safety to “fire”?

got the magazine all the way into the grip properly?

checked that the semi/full auto selector is t somewhere in between?

yes fully cocked but the bb just roll out of the barrel

Link to comment
Share on other sites

37 minutes ago, roger_37 said:

yes fully cocked but the bb just roll out of the barrel

BBs rolling out sounds like you have double fed the gun. That shouldn't stop it from firing. Have you checked the mag is holding gas if you have done everything else suggested. There is a valve on the back of it there should be serious resistance if you push on it. If there is not there is no gas in the mag. You should be holding the mag up side down when filling the mag should take 10 Seconds to fill.

Link to comment
Share on other sites

6 minutes ago, Enid_Puceflange said:

What happens when you pull the trigger?

does it click?

it fires but no bb come out ,they bb roll out

4 minutes ago, BigStew said:

BBs rolling out sounds like you have double fed the gun. That shouldn't stop it from firing. Have you checked the mag is holding gas if you have done everything else suggested. There is a valve on the back of it there should be serious resistance if you push on it. If there is not there is no gas in the mag. You should be holding the mag up side down when filling the mag should take 10 Seconds to fill.

i turned the hopup wheel and it fired the bbs but then stopped so more adjustment needed

Link to comment
Share on other sites

3 minutes ago, roger_37 said:

it fires but no bb come out ,they bb roll out

i turned the hopup wheel and it fired the bbs but then stopped so more adjustment needed

Hop should not be stopping the gun from firing is the gun dry firing ( if you put a gassed but unloaded mag in the gun and fire it) does the gun cycle?

Link to comment
Share on other sites

3 hours ago, Enid_Puceflange said:

What happens when you pull the trigger?

does it click?

 

3 hours ago, BigStew said:

Hop should not be stopping the gun from firing is the gun dry firing ( if you put a gassed but unloaded mag in the gun and fire it) does the gun cycle?

 

Link to comment
Share on other sites

On 09/12/2021 at 13:49, BigStew said:

Hop should not be stopping the gun from firing is the gun dry firing ( if you put a gassed but unloaded mag in the gun and fire it) does the gun cycle?

gun cycles ok, it fires ok but it stops with bbs in the mag, it fires 3/4/5/then stops gas still in mag,  also some times you have to recharge because it does not recharge with the blow back what can i do to stop this?

Edited by roger_37
Link to comment
Share on other sites

11 hours ago, Enid_Puceflange said:

Send it back if you bought it new from a retailer

yes new from retailer only a few days old.

10 hours ago, EDcase said:

Talk to the shop to see what they say.

Make a video to show what its doing.

 

Are you filling properly with the gas bottle pointing down?

 

 

yes using green gas mag has gas in it it fires then stops feeding bbs to fire.

Link to comment
Share on other sites

Sounds like it has to go back but I'd be curious to see a video of the problem because I can't imagine a situation where it fires OK then stops feeding with gas still in the mag.

Could be worth doing a purge on the mag: 

 

 

Link to comment
Share on other sites

3 minutes ago, EDcase said:

The magazine is clearly leaking.

Its not difficult to fix but since its new you can return it.

id be interested in knowing the fix for the mag,thanks

but there was gas in the mag as i let it out with the release valve.

 

Edited by roger_37
Link to comment
Share on other sites

2 minutes ago, EDcase said:

Do a search on YouTube for 'Gas magazine leak'

Because there are so many types of magazine watch a few of them to get a good idea what to do.

ok thanks for all the help, will have a look on the tube

Link to comment
Share on other sites

17 minutes ago, EDcase said:

Just to note, there still might be a problem with the pistol itself so be careful in case you do need to return it after all.

will do ,mod done on leaking mag new seal installed don't think it is leaking now,

other seal was torn not split but a bit hanging off, so replaced it with seals i had.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...