Egoslave Posted February 10, 2021 Share Posted February 10, 2021 Hi all, I have a VFC Glock 17 Gen4. When manually racking with an empty mag inserted the slide will lock back. But it will not lock back on an empty mag when firing! I’ve used two different, fully gassed mags. It happens on both. Any ideas what is causing this issue? Link to comment Share on other sites More sharing options...
Cr0-Magnon Posted February 10, 2021 Share Posted February 10, 2021 Which gas are you using? Is the gun well cleaned and lubed? What temperature are you using it at? Does it happen if you fully gas the mag and only fill with a few BB's? Link to comment Share on other sites More sharing options...
Egoslave Posted February 10, 2021 Author Share Posted February 10, 2021 18 minutes ago, Cr0-Magnon said: Which gas are you using? Is the gun well cleaned and lubed? What temperature are you using it at? Does it happen if you fully gas the mag and only fill with a few BB's? I’m using green gas. It’s clean and oiled. I’m testing it indoors. I’ve fully gassed the mags and tried it with two types of fully and partially loaded mags. Like I say, it works manually but not when firing. Link to comment Share on other sites More sharing options...
BigStew Posted February 10, 2021 Share Posted February 10, 2021 2 hours ago, Egoslave said: I’m using green gas. It’s clean and oiled. I’m testing it indoors. I’ve fully gassed the mags and tried it with two types of fully and partially loaded mags. Like I say, it works manually but not when firing. There are a few things it could be possible mag catch is worn/sticking or mag followers. Most likely it's just not cycling fully. That could be something is out of alignment and catching. It's light striking or there is something up with the gas router. Would start with field stripping it checking on Google image and see if everything looks right Link to comment Share on other sites More sharing options...
Guest Posted February 10, 2021 Share Posted February 10, 2021 I would say your hammer bearing is hanging up on the blow back unit. Eventually it will get so bad the gun will likely cycle but not fire any bb’s. Fairly typical of VFC and WE glocks as they wear Link to comment Share on other sites More sharing options...
Egoslave Posted February 10, 2021 Author Share Posted February 10, 2021 1 hour ago, rocketdogbert said: I would say your hammer bearing is hanging up on the blow back unit. Eventually it will get so bad the gun will likely cycle but not fire any bb’s. Fairly typical of VFC and WE glocks as they wear Shame it’s basically brand new 😳 Link to comment Share on other sites More sharing options...
Guest Posted February 10, 2021 Share Posted February 10, 2021 15 minutes ago, Egoslave said: Shame it’s basically brand new 😳 Show is some pics then? Link to comment Share on other sites More sharing options...
Recoil_ Posted February 12, 2021 Share Posted February 12, 2021 Sadly, I'm having the same issue on my VFC/Umarex HK45. Brand new, the slide doesn't lock back, regardless of an empty mag that has/hasn't fired BBs Link to comment Share on other sites More sharing options...
Recoil_ Posted February 12, 2021 Share Posted February 12, 2021 Resolved the issue, the little follower on the mag that pushes the slide catch up had stuck down. Check that yours is fully up possibly? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.