Egoslave

The issue began with the MOS slide upgrade and stock internals. Had further upgrades but issue continued and then with the original slide also. I’m thinking the frame maybe the issue? It almost looks as though the slides are not travelling flat. The MOS requires a bit of force to return to battery, the original just needs a tap 🤷🏻‍♂️ will probably order a new frame

Does anyone know why the slide on my VFC Glock 45 is sticking after a few rounds? It happens with 2 different slides. Sometimes after 2 rounds. Sometimes after 7-8! 130 Nozzle spring 130 Recoil spring Steel hammer set F1 trigger Full mag Room temp Happened before the upgrades which were done to try to solve the issue. No obvious damage to the frame. Well lubricated Totally baffled Thanks everyone 31525e5d-ebde-46bc-93de-43fb415fa31b.mp4

Shame it’s basically brand new 😳

I’m using green gas. It’s clean and oiled. I’m testing it indoors. I’ve fully gassed the mags and tried it with two types of fully and partially loaded mags. Like I say, it works manually but not when firing.

Hi all, I have a VFC Glock 17 Gen4. When manually racking with an empty mag inserted the slide will lock back. But it will not lock back on an empty mag when firing! I’ve used two different, fully gassed mags. It happens on both. Any ideas what is causing this issue?

Thanks for your help. A spot of oil and a fully gassed mag sorted out most of it. However, it now doesn’t lock back when empty. Very frustrating Update. It’s a magazine issue as I tried my spare mag and it kicks back fine on empty

Thanks I’ll give that a go and report back for others

Hi all. New to the forum! I have a VFC Glock 17 which is slide ‘locking’ with 3-4 BBs remaining in the mag. Although it’s not actually locking back fully enough to utilise the slide release! I have to manually rack it and then I can empty the mag. Any ideas what can cause this? Magazine? Gas? Thanks