Dehorning Trigger Guard on TM Hi Capa

[emilianoksa]

Has anyone ever ground down the flat faced trigger guard on a hi capa to round it off and make it look more like a traditional 1911 trigger guard?

 

If so, what sort of rotary tool attachment should be used? Sand paper type, I expect. 

 

And I assume removing bits of the black polymer will reveal a grey or white finish underneath.

 

In which case which black paint would you recommend for touching it up?

 

Grateful for any replies.

[heroshark]

I've done it on a od kjw lower. Think I calved it first an sanded. Most are the same colour all the way through afaik. Also cut the dust covers so they fit serpas.

[emilianoksa]

Thanks.

 

Not sure what you mean by "dust covers".

 

Sorry if I am being stupid, but could you help me out?

[BigStew]

 there are actually grips made by guarder that have the rounded trigger guard

[heroshark]

3 hours ago, emilianoksa said:

Thanks.

 

Not sure what you mean by "dust covers".

 

Sorry if I am being stupid, but could you help me out?

Where the rail is under the barrel. Usually be up to the slide on a 4.3 . Basically they are cut to standard 1911 length.

[emilianoksa]

On 09/01/2021 at 16:52, BigStew said:

 there are actually grips made by guarder that have the rounded trigger guard

Yes thanks.

 

But they are almost impossible to come by at the moment.

On 09/01/2021 at 17:42, heroshark said:

Where the rail is under the barrel. Usually be up to the slide on a 4.3 . Basically they are cut to standard 1911 length.

Thanks.

[BigStew]

On 15/01/2021 at 23:12, emilianoksa said:

Yes thanks.

 

But they are almost impossible to come by at the moment.

Thanks.

https://www.fire-support.co.uk/product/guarder-tactical-grip-for-marui-hi-capa-5143

[BigStew]

jus found a cheap one on ebay https://www.ebay.co.uk/itm/KUNG-FU-Airsoft-TK-Style-Handgrip-For-Marui-Hi-Capa-5-1-GBB-Series-Black/282083317648?hash=item41ad79d790:g:lnoAAOSwZ1BXc5G0