Guest Airsoft J2 Posted August 5, 2020 Share Posted August 5, 2020 Removed Link to comment Share on other sites More sharing options...
Supporters Lozart Posted August 6, 2020 Supporters Share Posted August 6, 2020 Any motor that can run on an M90 should be able to pull an M110, but we're talking VFC here so anything's possible. Sounds to me like the problem lies elsewhere though, does it work OK if you put the old spring in? Link to comment Share on other sites More sharing options...
Skara Posted August 6, 2020 Share Posted August 6, 2020 Considering that VFCs are set to run 400fps springs and come to the UK/Italy with a weak ass M80 inside, I'd say there's definitely something wrong with the gearbox/motor. Could be the motor not being at the correct angle so it locks up. Maybe when you swapped springs you moved something or slightly misaligned the gearbox. Negative Airsoft has a dedicated MCX video. Link to comment Share on other sites More sharing options...
Guest Airsoft J2 Posted August 6, 2020 Share Posted August 6, 2020 * Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.