Darbanator Posted May 7, 2020 Share Posted May 7, 2020 Does anyone have a video showing how I fit a b30/31 and a pt1 stock to a cyma Link to comment Share on other sites More sharing options...
Supporters Lozart Posted May 7, 2020 Supporters Share Posted May 7, 2020 Which Cyma? Link to comment Share on other sites More sharing options...
Darbanator Posted May 7, 2020 Author Share Posted May 7, 2020 1 hour ago, Lozart said: Which Cyma? Aks74 Link to comment Share on other sites More sharing options...
Speedbird_666 Posted May 7, 2020 Share Posted May 7, 2020 Be careful - I bought a flat rear QD plate (to run my CYMA AKS-74U as a pistol) which I think was intended for an LCT. I had to file down the hinge point (too tall) and re-profile the catch engagement lug on the plate for it to work. Wasn't too worried on a £14 stock plate, but I would be much more careful with an expensive stock. Link to comment Share on other sites More sharing options...
Supporters Lozart Posted May 10, 2020 Supporters Share Posted May 10, 2020 On 07/05/2020 at 15:27, Darbanator said: Aks74 Do you know the Cyma CM... number? Link to comment Share on other sites More sharing options...
Darbanator Posted May 11, 2020 Author Share Posted May 11, 2020 18 hours ago, Lozart said: Do you know the Cyma CM... number? Cm.040 Link to comment Share on other sites More sharing options...
Supporters Lozart Posted May 11, 2020 Supporters Share Posted May 11, 2020 2 hours ago, Darbanator said: Cm.040 OK, so fitting the handguard should be pretty easy, once you remove the original one you'll just need to reverse the procedure - did you get the gas tube cover to go with it? As far as the stock goes, you may need the stock adaptor to avoid all the fettling issues stated above: https://www.airsoftzone.co.uk/cnc-metal-pt-stock-adapter-for-lct-cyma-ak-series-combat-union.html Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.