Dawnrazor Posted December 8, 2019 Share Posted December 8, 2019 Hi, I have a CZ Shadow 2 and the threaded outer barrel, for suppressors and tracer units, however, I can't seem to remove the inner barrel from my stock outer barrel in order to fit the threaded barrel, as there is a pin that runs through the hop up unit. I've tried tapping the pin through gently as not to damage the hop up unit, but it just won't budge and I don't want to break it. Is there a method I'm missing of doing this as it's supposedly a "drop in" part, but the pin stops the inner barrel and hop unit from being extracted? Any help would be most grateful. Link to comment Share on other sites More sharing options...
Guest Posted December 8, 2019 Share Posted December 8, 2019 The little brass pin? Support the barrel unit and tap it out, you’ll be fine Link to comment Share on other sites More sharing options...
AK47frizzle Posted December 8, 2019 Share Posted December 8, 2019 Ye, you need to really hammer it hard. It's a pain in the ass. I hate the gun in general :>> Link to comment Share on other sites More sharing options...
sonofsammo Posted December 8, 2019 Share Posted December 8, 2019 I presume it's similar to the original Shadow. You need to twat it with some reasonable force. The video starts at the point he's disassembled and has the hammer ready 😄 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.