Michael K Posted June 7, 2019 Share Posted June 7, 2019 I bought an Nuprol Honey Badger which is an AEG and I also bought a 40000k Motor with it. Will it work properly??? Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted June 7, 2019 Supporters Share Posted June 7, 2019 40k is a speed motor, not as fast as 45k but pretty quick (think 30k is a bit sensible snap) keep it on 7.4v - it might run a bit warm but don't ffs try anything higher than 7.4v or it will wreck 20k-25k you can run on 11.1v most likely but the faster motors - yeah keep them on 7.4v it will get a bit warmer than stock motor as it's running faster of course will drain your battery quicker to as it draws more amps etc.... it's ok but keep the voltage sensible @ 7.4v max Link to comment Share on other sites More sharing options...
Michael K Posted June 7, 2019 Author Share Posted June 7, 2019 1 minute ago, Sitting Duck said: 40k is a speed motor, not as fast as 45k but pretty quick (think 30k is a bit sensible snap) keep it on 7.4v - it might run a bit warm but don't ffs try anything higher than 7.4v or it will wreck 20k-25k you can run on 11.1v most likely but the faster motors - yeah keep them on 7.4v it will get a bit warmer than stock motor as it's running faster of course will drain your battery quicker to as it draws more amps etc.... it's ok but keep the voltage sensible @ 7.4v max Cool thanks I only have 7.4V batteries anyways so that won't be much of a problem thanks for the information tho it was really helpful! Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted June 7, 2019 Supporters Share Posted June 7, 2019 if it's one of those asg ones i'm not sure even 7.4 will be enough to save your gearbox. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.