CommonAirsofter1 Posted April 14, 2019 Share Posted April 14, 2019 So I am wanting to make my ARP9 a DSG, but have no experience in any of the parts for a DSG. Can anyone tell me a list of the type of parts which are essential for the build (not specific products)? What would the overall cost be on average for this? Thanks for help, it is much appreciated. Link to comment Share on other sites More sharing options...
ak2m4 Posted April 14, 2019 Share Posted April 14, 2019 not everything essential but here's a rough list.....it ain't for the faint-hearted DSG gear 18:1 gear set (16:1 will work as well) HT motor - ZCI 22tpa FMR piston mosfet 16awg wire decent compression decent bushings decent gearbox shell .... ... Plenty of patients Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted April 14, 2019 Supporters Share Posted April 14, 2019 I wouldn't bother as most home built and even supposed tech built DSGs I have come across are frankly crap. When boneyards were more of a thing they were regularly full of DSGs that had eaten themselves. Link to comment Share on other sites More sharing options...
CommonAirsofter1 Posted April 15, 2019 Author Share Posted April 15, 2019 17 hours ago, ak2m4 said: not everything essential but here's a rough list.....it ain't for the faint-hearted DSG gear 18:1 gear set (16:1 will work as well) HT motor - ZCI 22tpa FMR piston mosfet 16awg wire decent compression decent bushings decent gearbox shell .... ... Plenty of patients Thanks for the list, I will look into specific parts and what their purposes are, appreciate it! Link to comment Share on other sites More sharing options...
Supporters Sitting Duck Posted April 16, 2019 Supporters Share Posted April 16, 2019 Isn't that G&G a ETU gun ???? TBH forget DSG as it is well over rated I'd just run it on a small 11.1v until the ETU or box craps out then re-do it as a 13:1 short stroke setup on a m115 spring The motor might be an Orange Ifrit or Blue G&G 25k motor on 13:1 you get near 20 rps on 7.4v if done right or 30rps on 11.1v (you would really need to know what you are doing and dump the ETU for a proper mosfet) Resist the DSG temptation BS - a good tweaked SSG will get very good results without a lot of money & hassle if done right replace the bronzey bushings as they wear quickly - especially under the gears really quick TBH - just use the gun as it is for a good while until it starts to crap out, the fps - wait until it drops below 300fps or something too many people - including me, take a working gun and fuck it up trying to upgrade shit plus a DSG unless you really really walk on water just craps out & destroys itself very quickly most DIY DSG's instead of firing very quickly, end up just destroying themselves very quickly instead uae it as is for a good while and stick with a tweaked SSG setup maybe than dream of a DSG Link to comment Share on other sites More sharing options...
ak2m4 Posted April 17, 2019 Share Posted April 17, 2019 DSG builds are super hard to get right and ultimately less reliable. Is the ARP9 your only AEG ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.