Andig4 Posted October 16, 2018 Share Posted October 16, 2018 Hey guys Just bought my first tokyo marui hk416 and got the dealer to do the battery conversion. Basically the small back cover doesn't fit now due to the wires. Any way around this? Or just use waterproof tape? Link to comment Share on other sites More sharing options...
mogaly674 Posted October 16, 2018 Share Posted October 16, 2018 Just take a look at the routing of the cables and gently remove the plastic from the back cover. Link to comment Share on other sites More sharing options...
Supporters Druid799 Posted October 16, 2018 Supporters Share Posted October 16, 2018 As above said try ‘fiddling around’ with wires if still no joy you can either cut chunk out of the middle of the small cover to accommodate them or you can cut the two ‘wings’ off the cover (what I did with a stock once) and glue them permanently in place on the stock pad . Link to comment Share on other sites More sharing options...
Head Moderator Jedi_Master Posted October 16, 2018 Head Moderator Share Posted October 16, 2018 I recall there being a specific TM spare part that you could buy to fit the gap. Try Eagle6, I think this is the part you want: https://eagle6.co.uk/shop/catalog/product/view/id/4711/s/et-1-lipo-battery-adaptor-cover-black-for-m4-hk416-next-generation-recoil-shock-series/ Link to comment Share on other sites More sharing options...
Andig4 Posted October 16, 2018 Author Share Posted October 16, 2018 Thanks for all the replies guys, I went for what jedi said, just placed the order. Don't wanna waffle around with glue and cutting into shape etc. Also, thanks for the link jedi. Would never of guessed what to search for lol Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.