Jump to content

G&G warthog upgrades


Frizza
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi

 

What's your budget and what are you looking to get/use it for?

 

Simplest upgrade is the hop rubber.

 

Cheers


G

Link to comment
Share on other sites

Thanks for replying, 

 

just want to use use it for cqb-medium range. It’s my first airsoft gun and just want to do some little upgrades to learn a bit and improve it. Budget is about £100

 

thanks

Link to comment
Share on other sites

G&G stock hop rubbers are good. I wouldn't go upgrading it until you have put at least 10K BB's through the gun. It's only then you will know if it needs upgrading or not.

The hop unit I wouldn't touch. If the one you are using can shoot and hop 0.2's then that is all you need for cqb. Dense woodland that might change as you may find you want to lift heavier bb's like 0.3's to beat cover.

Inner barrel again I wouldn't touch for CQB.

It boils down to basics, If you are playing cqb and the gun is working at the ranges you shoot at, hitting targets, and lifting bb's then there is nothing more you need to do to it to make it work better. Upgrades are generally done because of 2 things, you want more consistency at range, or you want to run with a ROF so high that everything needs locking down hard. Upgrading for the sake of upgrading is the single fastest way of making a good stock gun shoot badly. Leave it alone until you need to upgrade.

 

Link to comment
Share on other sites

Nothing wrong with buying a hop unit, rubber + nub, and barrel building it up and swapping it over, then if there is problems you’ve got the original as back up. Shouldn’t set you back much more than £50 if you use ak2m4 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...