Renegade_ Posted June 3, 2018 Share Posted June 3, 2018 Got my UKARA number today so I can now finally buy my first AEG! I’ve had some time to research options etc and I have a fairly good idea of what I want to get along with all the assorted extra kit. There’s always cheaper and better options out there so I wanted to post my shopping list to see if you guys have any comments or suggestions. AEG: I debated between the Combat machine 2.0 and the specna for a while but decided on the specna as I prefer the ‘normal’ m4 look along with it having more metal parts. https://gun-fire.co.uk/product-eng-1152207262-SA-B02-SAEC-TM-System-carbine-replica.html (which is currently out of stock 😑) Charger:https://www.componentshop.co.uk/1000ma-1500ma-li-po-li-fe-charger-for-2s-3s-lipo-life-battery-packs-complete-with-psu.html Battery 2x:https://www.componentshop.co.uk/7-4v-1300mah-25c-continuous-discharge-cranestock-lipo-battery.html Magazines: http://www.patrolbase.co.uk/stanag-magazines/nuprol-stanag-30140rnd-adjustable-mid-cap-magazine-x5-bundle.htm#.WxRd5CAh2Ul Helmet:https://gun-fire.co.uk/product-eng-1152206594-FAST-PJ-CFH-Helmet-Replica-Foliage-Green-M-L.html Gun case: https://www.decathlon.co.uk/100-shotgun-case-id_629401.html Sling:https://www.uktactical.com/p-8550-warrior-sf-single-point-black.aspx Kit I already own: Goggles One Tigris lower Mesh mask Gloves Boots Chest Rig Link to comment Share on other sites More sharing options...
Supporters Prisce Posted June 4, 2018 Supporters Share Posted June 4, 2018 Firstly, scrap that charger and get this one. https://hobbyking.com/nl_nl/imax-b6ac-v2-professional-balance-charger-discharger-uk-plug.html?___store=nl_nl You and your batteries will thank us in the long run. Rest of it looks ok. I don’t really do the gear side of things, so you are best waiting for someone else to pop in and say hi. Link to comment Share on other sites More sharing options...
Renegade_ Posted June 4, 2018 Author Share Posted June 4, 2018 8 hours ago, Prisce said: Firstly, scrap that charger and get this one. https://hobbyking.com/nl_nl/imax-b6ac-v2-professional-balance-charger-discharger-uk-plug.html?___store=nl_nl You and your batteries will thank us in the long run. Rest of it looks ok. I don’t really do the gear side of things, so you are best waiting for someone else to pop in and say hi. Thanks for the reply! I found that charger on amazon so I'll look at getting it instead. The spec's done mentioned it but i assume it does auto-shutdown? https://www.amazon.co.uk/Tenlacum-Professional-Discharger-Helicopter-BatteryToys/dp/B01EDYCJN4 Link to comment Share on other sites More sharing options...
Supporters Prisce Posted June 4, 2018 Supporters Share Posted June 4, 2018 The difference between the 2 is, the one I sent you is genuine, and the one you posted may not be. The charger itself will bleep loudly when it is fully charged, so you know it’s done. You should never leave a battery unattended so it doesn’t have an auto shutdown feature. Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted June 4, 2018 Supporters Share Posted June 4, 2018 19 hours ago, Renegade_ said: https://gun-fire.co.uk/product-eng-1152207262-SA-B02-SAEC-TM-System-carbine-replica.html (which is currently out of stock 😑) Might be a blessing, there's been a lot of reports of GunFire having big delays sending orders out. None for a couple of weeks though, so either they've sorted it, or everyone has given up on them. Link to comment Share on other sites More sharing options...
Renegade_ Posted June 6, 2018 Author Share Posted June 6, 2018 On 6/4/2018 at 6:18 PM, Rogerborg said: Might be a blessing, there's been a lot of reports of GunFire having big delays sending orders out. None for a couple of weeks though, so either they've sorted it, or everyone has given up on them. I'll find out soon! From what i read the issues were caused by an IT upgrade to the order system going wrong, as someone who works in IT i can kind of give them the benefit of the doubt as these things can happen. I ended up making a change to what I bought and went with the SA-B01 instead as it currently has a good £40 discount. I quite wanted the normal length m4 anyway so it's worked out well for me. https://gun-fire.co.uk/product-eng-1152207261-SA-B01-SAEC-TM-System-Assault-Rifle-Replica.html On top of that I got a RIS rail to replace the stock handguard: https://gun-fire.co.uk/product-eng-1152202312-CQB-RIS-rail-system-for-M4-M16.html The guard won't have enough space so I'll have to get a battery along with either a PEQ box or grip that can hold it: http://www.patrolbase.co.uk/airsoft-grips-and-stocks/pts-syndicate-pts-epf2-vertical-foregrip-black.htm http://www.patrolbase.co.uk/airsoft-torch-laser/anpeq-16a-battery-case-black.htm#.Wxg30iAh2Uk Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.