sonofsammo Posted April 9, 2018 Share Posted April 9, 2018 Aaaaaaaargh! I've juts taken my mk23 to bits to fit new barrel and bucking. And there's a problem. The outer barrel is narrower than the inner barrel. Which means the new barrel won't go through. How did I miss this in the how to videos??? and what do I do now?? Link to comment Share on other sites More sharing options...
Supporters Prisce Posted April 9, 2018 Supporters Share Posted April 9, 2018 Look for those how to videos again. You need a drill and a drill bit. (Can’t remember the size possibly 9/12mm) and gently put it into the outer barrel. If you can’t find the vid lemme know and I’ll have a look. Link to comment Share on other sites More sharing options...
Tormen7ed Posted April 9, 2018 Share Posted April 9, 2018 Here you go. make sure you disassemble it as the manual shows though. Guy in the vid just pops out the slide lock pin. You should pull the slide back a bit til the little grove makes space for a raised part to slide out Link to comment Share on other sites More sharing options...
sonofsammo Posted April 9, 2018 Author Share Posted April 9, 2018 6 minutes ago, Prisce said: Look for those how to videos again. You need a drill and a drill bit. (Can’t remember the size possibly 9/12mm) and gently put it into the outer barrel. If you can’t find the vid lemme know and I’ll have a look. Cheers - I'd been using the Kicking Mustang vid - he seems to miss that bit out! Now I have to go and buy a drill bit. And a drill...... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.