Cadoris Posted December 22, 2017 Share Posted December 22, 2017 Good evening Gents. Quick question for those in the know. This cannon 403FPS (Using 0.20g BB, Cyber Gun 12g Co2 Bulb Capsule, 9.3°c, Standard Shell) as stated on Patrol base site. Anyone know what weight BB's to use to get it below the 350fps for site use. I know I can get the power down cartridge but the fps drops to 180... (I can almost run faster than that). Would using .28 or even .3 be any use? Cheers. Link to comment Share on other sites More sharing options...
RR01 Posted December 22, 2017 Share Posted December 22, 2017 Using heavier weight BBs is cheating. The gun must be set to fire below the limit using 0.2g BBs. The only way is to buy the Power Down shells which have a smaller hole in the base to restrict the amount of gas used. FPS doesn't really make that much difference,as most DW revolvers do not have a hop installed, so are really only accurate over short distances. Link to comment Share on other sites More sharing options...
Guest Posted December 22, 2017 Share Posted December 22, 2017 The FPS figure is shorthand, if you like, for the power output of the gun. 0.2 bb’s and 350fps is the lint in Joules, up the bb weight and the fps must drop significantly. The point of the limit is to be safe, you do not want to fire a hot gun at anybody Link to comment Share on other sites More sharing options...
Seany.exe Posted December 28, 2017 Share Posted December 28, 2017 Get the low power version if you plan on skirmishing. If you're planning on using the high power for anything other than target practice or in america then you're just a prick. Good thing that all sites I know of at least chrono everything before games Link to comment Share on other sites More sharing options...
Ajax Posted February 12, 2018 Share Posted February 12, 2018 Hi guys. Canyou tell me if the only difference between low and high powered versions are the shells? It there aby difference in gun itself? My cunning plan is to get a gun with low power shells and use it at the field and then get the multi bbs shells and use it as shotgun revolver. But for this I need this high power output from the gun to keep those multiple bbs traveling at some reasonable speeds Any experience with this? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.