hawkite Posted January 16, 2017 Share Posted January 16, 2017 I own a G&G SR-L M4 and I went and bought these https://www.airsoftworld.net/catalog/product/view/id/1933/. They fit perfectly snug into the mag well but only 1 in 4 shots actually feeds and shoots. I wriggle the mag around and it doesn't help at all. Problem is way worse on semi. Any fixes I can do? Probably was a bit stupid to order 6 but somebody said they worked with CM16s so. Thanks. Link to comment Share on other sites More sharing options...
Guest PT247 Posted January 16, 2017 Share Posted January 16, 2017 what battery are you using? Link to comment Share on other sites More sharing options...
Roundel91 Posted January 16, 2017 Share Posted January 16, 2017 Following with interest. Im having major issues trying to find a midcap that works with my CM16 raider. Link to comment Share on other sites More sharing options...
Kash Posted January 16, 2017 Share Posted January 16, 2017 PTS EPM if you can find em fit pretty much anything. Link to comment Share on other sites More sharing options...
hawkite Posted January 17, 2017 Author Share Posted January 17, 2017 what battery are you using? 9.6v NiMh I was going for an 11.1v LiPo but the guy advised strongly against them Link to comment Share on other sites More sharing options...
Guest PT247 Posted January 17, 2017 Share Posted January 17, 2017 I think these new G&G guns are very picky on what battery you put in them, have a search on the forums in here I'm sure it has been answered Link to comment Share on other sites More sharing options...
hawkite Posted January 17, 2017 Author Share Posted January 17, 2017 I think these new G&G guns are very picky on what battery you put in them, have a search on the forums in here I'm sure it has been answered The G&G hicap mag that came with it works perfectly with the battery I use so I don't see how that would affect feeding? I might be wrong in saying that so any help is great. Thanks Link to comment Share on other sites More sharing options...
Mike W Posted January 18, 2017 Share Posted January 18, 2017 I have G&G guns and some mags where playing up the same as yours. If you push the mag all the way and up into the magwell does it feed ok? I Found on mine that I had to shave a little from the feed locking lip so when the mag was pushed in it engaged the lip and pushed it back further . Another question and I know some people will say against this but I have done it with no issues. Empty the mag and spray some silicone spray down the top of the feed tube and then put some bb's in it and feed a few through by hand and throw away then re-fill and put in gun and see if it works. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.