NathyB Posted December 23, 2016 Share Posted December 23, 2016 I brought a lonex M100 Spring for my Krytac crb mark 1 as most of us know you have to strip the hole gun to swap out the spring my question is do you think a inexperienced person with the right tools would be able to do this I've took apart gas mags and repaired them my self I am a carpenter by trade so understand construction elements more so then most people thanks Link to comment Share on other sites More sharing options...
Georgeturner2001 Posted December 23, 2016 Share Posted December 23, 2016 I brought a lonex M100 Spring for my Krytac crb mark 1 as most of us know you have to strip the hole gun to swap out the spring my question is do you think a inexperienced person with the right tools would be able to do this I've took apart gas mags and repaired them my self I am a carpenter by trade so understand construction elements more so then most people thanksIt's pretty simple to do, plenty of videos online.The krytac gearbox is quick change which means you don't have to fully disassemble it to change the Spring. All you have to do is goggle 'krytac spring change' and plenty of videos will pop up. Link to comment Share on other sites More sharing options...
Guest PT247 Posted December 23, 2016 Share Posted December 23, 2016 It is very simple to do a spring change on a Krytac, just be methodical and don't force anything. I've just changed the spring in my SDP, took around an hour from start to finish. Link to comment Share on other sites More sharing options...
NathyB Posted December 23, 2016 Author Share Posted December 23, 2016 What tools do I need screw driver etc size Allan key ? Link to comment Share on other sites More sharing options...
Guest PT247 Posted December 23, 2016 Share Posted December 23, 2016 8mm allen key to remove the spring from the gearbox, but you'll need a small punch, a small allen key to remove the screws on the end of the receiver pins, a small crosshead to remove the mag release, a very small alen key to remove the left hand side change lever, a long handled cross head to remove the pistol grip and motor. Link to comment Share on other sites More sharing options...
NathyB Posted January 1, 2017 Author Share Posted January 1, 2017 Swapped the spring out with not many issues which got my thinking if I swapped the motor out to a 30k and ran a 11v lipo wouldn't it be a beast ? Is this possible Link to comment Share on other sites More sharing options...
Supporters ImTriggerHappy Posted January 1, 2017 Supporters Share Posted January 1, 2017 Sure there are lots of threads on the Krytac and some of those will give you answer you are looking for. Searching and finding the answer yourself will be more beneficial than one of us spoon feeding you the answer and save another pointless thread. The search function is safe to use and wont harm anybody. Link to comment Share on other sites More sharing options...
Guest PT247 Posted January 1, 2017 Share Posted January 1, 2017 Swapped the spring out with not many issues which got my thinking if I swapped the motor out to a 30k and ran a 11v lipo wouldn't it be a beast ? Is this possibleUsed to run my PDW with the 30k and an 11.1v LiPo and yes as long as it doesn't double feed then will be ace. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.