ikarma70 Posted March 28, 2015 Posted March 28, 2015 Hi guys, what would be a good motor to buy for a upgrade from the eg700 motor already fitted? I'm asking as I don't want to ruin my favourite cqb gun? Thanks Andy
cyrexx Posted March 30, 2015 Posted March 30, 2015 It depends on what you want from the motor, speed or torque. are you looking to increase your rate of fire or increase trigger response or both?
ikarma70 Posted March 31, 2015 Author Posted March 31, 2015 A little of both but I don't want to knacker anything up.
ikarma70 Posted March 31, 2015 Author Posted March 31, 2015 Unless I can source a decent capacity drum mag I don't see the point in a higher ROF.
Supporters Sitting Duck Posted March 31, 2015 Supporters Posted March 31, 2015 If you stick with 7.4 or 8.4v Then probably cheapest tweak for a slight boost is maybe switch to deans on gun + battery BUT don't go nutz on 9.6, 9.9 or 11.1v without a fet - just keep it moderate 7.4v lipo stock wire and deans will give a slight boost to trigger/ROF All for a couple of quid (As long as you can solder OK) Little boost for little money, go easy on juice and she will be fine without major modding
ikarma70 Posted April 1, 2015 Author Posted April 1, 2015 I already have fitted deans as I do to all of my aegs and it certainly helped the trigger response and ROF, I think on that advice I will leave the motor alone, thankyou guys!!!!
Supporters Sitting Duck Posted April 1, 2015 Supporters Posted April 1, 2015 I already have fitted deans as I do to all of my aegs and it certainly helped the trigger response and ROF, I think on that advice I will leave the motor alone, thankyou guys!!!! Ahhhhh soz didn't know that but yeah probably best cheap and safest upgrade to do if peeps can solder yeah if it ain't broke - something I should remember or remind myself from time to time Lozart 1
Recommended Posts