Supporters Rock-climby-Dave Posted November 24, 2010 Supporters Share Posted November 24, 2010 My stock has become VERY loose and I have managed to work out it is the threads on whatever the hell the tock screw threads into have stripped almost completely. Would I be right in thinking the thing it screws into is the back of the spring guide in the gearbox? If yes, good If not, where does it connect? cheers Link to comment Share on other sites More sharing options...
AF-UK Founding Member Deva Posted November 24, 2010 AF-UK Founding Member Share Posted November 24, 2010 I don't know what it goes into, I'm sure someone else will though. However, how can you be sure it is the thread or what it's going into? If you don't have a brand new screw to compare to it could also be that. If you have something that is of the correct size then you should try that first imo just to see. Don't use anything else if it is a different size (be careful of metric/imperial). You could always get some strong thread locker and stick that all over it and hope for the best Link to comment Share on other sites More sharing options...
Supporters Rock-climby-Dave Posted November 24, 2010 Author Supporters Share Posted November 24, 2010 thread on screw isn't stripped. wobbles when on the end of the other thread, but doesn't when I remove the black back plate of the M4 to tighten it down further. thus: End of thread has been stripped Link to comment Share on other sites More sharing options...
JerseyRider Posted November 24, 2010 Share Posted November 24, 2010 Yer it screws into the back of the gearbox where the spring guide is Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.