JG Bar 10 Upgrades

[SuicidalBarrelRoll]

List the most economic 50 quid to slend on the JG Bar 10. Go.

[Unrustle_Thine_Jimmies]

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

[SuicidalBarrelRoll]

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

How nice will performance be then?

[Samurai]

A Modify hopup rubber.

[Unrustle_Thine_Jimmies]

Performance depends on how well you build it really. You can have a full 2000$+ VSR full PDi parts and still have it shoot like shit.

[SuicidalBarrelRoll]

Performance depends on how well you build it really. You can have a full 2000$+ VSR full PDi parts and still have it shoot like sh*t.

Say that I built it with those parts well...skirmishable?

[Sam_G]

My old BAR10 had

 

ASPUK - piston

ASPUK - cylinder head

ASPUK - 150 spring

SCS sear set

WE hop rubber

Dangerworx type B hop arm

 

I also did the PTFE tape mods and made some leccy tape barrel spacers

 

Just a little bit over you £50 budget but that saw 507FPS on a .2 and some great range.

[SuicidalBarrelRoll]

SHS steel sear set- about 15 quid from ehobby

 

Dangerwerx type B lever- 20 quid from ASPUK

 

Your piston will get eaten by the sears. So I'd buff up the budget to 60 quid so you can afford an Action army piston from ehobby or somesuch for about 20 quid and still have a tenner left over for supplies for DIY mods.

 

DIY mods-

 

Seal hop up buckings with dental floss

 

Seal cylinder with PTFE

 

Grease the gun properly with some nice silicone grease. The earwax stuff JG uses is awful.

 

Thoroughly wash the hop up buckings in fairy liquid

 

do the google dance for more class DIY mods. Plenty can be done on the cheap.

Are there any TM hop ups for the Bar 10?