Jump to content

Archived

This topic is now archived and is closed to further replies.

Paveway

PSG1 Mod

Recommended Posts

So have a PSG1 and its been used maybe half a dozen times since new, six years ago.

 

Im looking to upgrade it and I don't mean just the internals.

 

G&G used to do a RAS kit for this, but I don't know if its available anymore. So, what im looking for is a realistic set of ideas of hybrid designs that would be feasible.

 

Hope that makes sense.

 

Cheers

Dave

Share this post


Link to post
Share on other sites

Check every retailer you can, the parts are still around. G&G's rail sets, metal receivers and stuff are still available- just a pain to find.

For internals, systema do an FTK and a few companies do inner barrels. PDI did some bits but they aren't made anymore- the chamber block is worth getting if you can find one, but they're only around on the 2nd hand market these days.

It was never a hugely supported rifle due to the unique version 4 gearbox, so it's basically seeing what you can find here and there :)

Share this post


Link to post
Share on other sites

Aside from fitting a rail system, any views on a hybrid weapon. In relation to the main body, gearbox etc is this not the same as the G3 SG1?

 

Dave

Share this post


Link to post
Share on other sites

What do you mean by hybrid?

The recievers will a g3 version 2 gearbox, might need a few mods though. It's not the same as the SG1, the externals are different as are the internals, but they have a fair bit of compatibility. The hop unit is probably the same.

Share this post


Link to post
Share on other sites

×