Supporters sp00n Posted June 8, 2013 Supporters Share Posted June 8, 2013 Dose anyone know where I might find a list of nozzle lengths? The reason I ask is I am having an issue getting more than standard fps out of my tm mp5k. I am starting to think that the issue is down to the air nozzle not meeting the hop (new air nozzle and hop rubber etc, I have checked the seal and every thing is as it should be. I know the standard nozzle is 21.04mm (I vernier'ed it;) ) but I am thinking I need a nozzle 1mm longer. I should also add I have checked on most retailers websites and none give the nozzle dimensions etc. Link to comment Share on other sites More sharing options...
Supporters sp00n Posted June 10, 2013 Author Supporters Share Posted June 10, 2013 have you noticed that when your looking for something else you find the original answer you wanted in the first place Nozzle Lengths: 19.63mm - AK Series20.40mm - MP5-A4/A5/SD5/SD6 Series20.73mm - P90 Series20.77mm - M16A1 VN/XM177E2/CAR-15 Series21.03mm - MP5-K/PDW Series 21.20mm - G3-A3/A4/SG-1/MC51 Series21.22mm - M4/M16 Series 22.26mm - SIG 550/551/552 Series 24.27mm - G36 Series 24.60mm - AUG Series taken from http://www.air-lab.co.uk/lonex-air-seal-nozzle.html Link to comment Share on other sites More sharing options...
Supporters sp00n Posted June 10, 2013 Author Supporters Share Posted June 10, 2013 also found the following Approximate FPS Of Guarder Springs Guarder SP85 Spring: 280 FPS Guarder SP90 Spring: 295 FPS Guarder SP100 Spring: 330 FPS Guarder SP110 Spring: 360 FPS Guarder SP120 Spring: 390 FPS Guarder Sp130 Spring: 430 FPS Guarder SP140 Spring: 460 FPS Guarder SP150 Spring: 490 FPS Guarder SP160 Spring: 520 FPS Guarder SP170 Spring: 560 FPS These are approximate values, and should be somewhere near Mxxx spring values Link to comment Share on other sites More sharing options...
Supporters Ian_Gere Posted September 21, 2013 Supporters Share Posted September 21, 2013 Well, there are at least 2 common lengths for AK's, but I have several, and SRC G36's are not the same as TM. I don't have callipers to measure my pile of nozzles but I think I'll see if I can get some from fleabay. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.