Jump to content

CM16 Front sight removal


Monty
This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

yeah there's two metal pins holding the sight on at the bottom and you will have to remove the flash hider there should be a screw holding it in place remove that and unscrew it also depending on the way the hand guards mounted it may come off or wobble a bit

Link to comment
Share on other sites

  • Supporters
yeah there's two metal pins holding the sight on at the bottom and you will have to remove the flash hider there should be a screw holding it in place remove that and unscrew it also depending on the way the hand guards mounted it may come off or wobble a bit

 

Their's no pins, it's just one barrel piece. ): Oh well

Link to comment
Share on other sites

You will probably need a new barrel if you want to change the front sight. I looked at doing it with mine but gave up and made a whole new upper to swap over if I wanted to change the lenght of my CM16 CQB.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...