VFC M249 Thread

[Austeyr]

It's not a bad idea to fit one . You can just turn the pressure down on the regulator , but I find with mine the NPAS is a better solution.

Click to shrink...

Yeah I fitted a standard VFC NPAS before I took it out last month, great bit of fun!

Every few shots I had one BB dropping to the floor in front of me with every other shot being fine so I've done the o-ring and maple lead bucking upgrade. Hoping it's solved the issue of over chambering

 

[the6thdegree]

Just sharing this here for prosperity; Bullgear make the best boxmag for the 249 I have found so far - by a long way. We initially followed Frog's AEG boxmag conversion (microswitch in the trigger) and it works really well, but on a 24hr milsim the MAG AEG boxmag died and were held together by ducktape and tie-wraps by the end. On our team's 2nd 249 we had this boxmag and it was flawless (and didn't need any conversions) https://bullgear.net/vfc-m249-gbb-kit-boxmag-m249

 

[Colin Allen]

Just sharing this here for prosperity; Bullgear make the best boxmag for the 249 I have found so far - by a long way. We initially followed Frog's AEG boxmag conversion (microswitch in the trigger) and it works really well, but on a 24hr milsim the MAG AEG boxmag died and were held together by ducktape and tie-wraps by the end. On our team's 2nd 249 we had this boxmag and it was flawless (and didn't need any conversions) https://bullgear.net/vfc-m249-gbb-kit-boxmag-m249

Click to shrink...

I am not sure how this is going to make you wealthier.