VFC M249 Thread

[Nick G]

Hello all. Any idea why I would have low fps with HPA? Direct connection swap with the gas connector in the mag well. At 130 psi I am at 1 joule on .32 bbs. Also looking in the stock air nozzle it looks adjustable? Has a threaded restirctor that seems can be adjusted?

Click to shrink...

When you say restrictor , do you mean it's screwed into the nozzle outlet or there is an NPAS inside the nozzle ? If it's in the end , unscrew and remove it , if it's an internal NPAS then start adjusting it untill you get to the desired power level.

 

[eyemaze]

When you say restrictor , do you mean it's screwed into the nozzle outlet or there is an NPAS inside the nozzle ? If it's in the end , unscrew and remove it , if it's an internal NPAS then start adjusting it untill you get to the desired power level.

Click to shrink...

It’s in the end. Thanks, will remove it and see, will probably then need an NPAS. I should have tested it out the box on green gas first…