Miêu Anh-Nguyễn

You can leave your email address to communicate, which was originally designed to fit into the barrel and be used as a prop. You can leave your email address to communicate, which was originally designed to fit into the barrel and be used as a prop.

As long as it is 14mm inverse tooth can be adapted

Of course, it's no problem. And it works well. I'll send the video. aa6403546a95cbfb36864b6e6bead249.mp4 b2d2b5a7a24e87303e7c0b46f5dd9aaf.mp4

First of all, it solves the smoky Wolf problem, and second of all, because this thing is a hassle to transport and in fact if you don't have to transport it it might only cost 60 pounds. it not same thing, somky wolf due to a structural problem, tracer needed infrared sensing to detect if the BB shot had passed, and the infrared sensing failed after the smoke occurred. and the oil smoke will condensation in the tube it will seem like lacking oli. This new one i sell the sensor becomes vibration sensing in a way that you can use to dry fires at home. And this sensor has been tested and will not be triggered by other impacts.

In fact, this thing started to sell half a year earlier than Smoke Wolf, and Smokey Wolf is a copy of this product, and there are problems such as oil leakage and failure Becasue smokey wolf It uses infrared sensors, and the smoke will interfere with it, and because of structural problems, the smoke will stay in the inner tube for a long time, so the condensed oil will affect hop-up.

No, but if you want a different color light bulb, I can change it for you in free.

What gas did you use? Is this green gas? I think it's because the temperature, and if your magazine is hotter than the Gas bottle, you can only pump a little bit of gas in noce time.

The internal movement 29.7mm*91.8mm, can be fitted with a muffler larger than suppressor， the use of soot drive and 3.7V lithium battery drive, the principle is electric heating oil to produce smoke, through the vibration sensor to light the LED light bulb, have not heard of it has serious failure. Oil is the kind of oil used to smoke models I don't know how to say in English. 1 part ①Upper suspension guide tube ③Springs ④Charging Cable ⑤Battery ⑥Main movement 2Universal size suppressor greater than 29.7 diameter and 918 mm long inside 3 Decomposition and assembly 4 Add the fume oil ①Need to add the lampblack line ②The line has been filled with soot refill

Good idea, even his inventor hasn't decided what to call it, but it has been producing it for a year. I can send you it manual electronically with accompanying translation if you like.

Unfortunately, due to a structural problem, tracer needed infrared sensing to detect if the BB shot had passed, and the infrared sensing failed after the smoke occurred. So the sensor becomes vibration sensing in a way that you can use to dry fires at home. This sensor has been tested and will not be triggered by other impacts. Sensor, smoke generator, LED bulb

This is a sample of photographer got last year, and the light bulb was either not installed or turned off And this internal structure could theoretically fit into most other suppressors.If the number of people who order is more, you can go and negotiate with the manufacturer

In advance, I am not a business, I just want to buy one, along with some of my daily necessities together to send, if anyone wants to buy with me then contact me. It's about 100 pounds each， If anyone needs it, I'll order it for him. no deposit required. Without further ado, I just show the videos and pictures.And you can choose different styles for AK or AR like SOCOM or PBS and QDC and osprey. Any questions can be pointed out in the comments section. Because I've used it before, it works better than Smokey Wolf 2b54b8924ec748aceb85ab91cc23c47d.mp4 713077638e0d6bcd235f33efb1143ec6.mp4

My Mauser M712 broke a small part, causing my trigger gruop to stop working, and I couldn't find a replacement part anywhere, so I ended up building something like a stopper with electrician tape and solder. then get it done

I didn't know there was such a thing. Ah，There will be no after-sales service if the goods are taken apart No wonder I haven't heard back in a week. I know the problem. I just need the right pin. I bought it on surplus store UK. Their website has a special after-sales service mailbox

The change lever pin broke in two after I used it for about 5 days. The whole trigger block is currently out of service.I've always wondered how something like this can break without force. Maybe zinc alloys become brittle in the winter? It reminds me that some of AEG's poor-quality zinc alloy boxes can be broken like dry bread in the cold days. I have already sent an email to the after-sales service, I just hope it can be resolved quickly. WE's products have always been this way or have I just unlucky?

Something very confusing to me, my M14 EBR suddenly had a malfunction, the cycle and fire us normal, but it could not shoot BBs, and I found that the valve did not shoot gas in forward, after I disassemble and assemble again, the malfunction was fixed.The valve was NPAS. By the way, A friend of mine in a red robe gave an incense burner and some purity seals, and suggest that I need to praise the Omnissiah. But I want to solve this problem once and for all.

There's one more thing that's hard for me to accept. BCM hop-up adopts a new adjustment method, which is adjusted directly on the airway, but due to the unstable structure, after shooting 5-7 magazines in a row, it will return to zero due to vibration, making the trajectory become a parabola.

I bought 3 VFC magazines in WOG. Than I was told by customs that there was a duty of 42 pounds. To be honest, this is really frustrating, but my friend told me that I should not use UPS for transportation but should choose EMS, because UPS is a commercial mail, while EMS is a private mail. Although it is more expensive, it can avoid paying tariffs, but I don't know if this is true.

My VFC BCM firing cycle too slow and is a little off range, so I'm going to replace it with a 6.01mm inner barrel

When I was in China, even though I was 23 years old and graduated from college, and working as a police officer in a prison, my mother would disapprove of me having airsoft in my house (shooting gel balls, but with the same structure as other AEG airsoft). Maybe you can sell your BM01, because the speed limit in Japan makes it difficult to upgrade a sniper rifle, and most Japanese airsoft's muzzle speed generally does not exceed 300FPS. And if you want to own a GBBR, you should consider whether the neighbors will come to your house because of the noise of the GBBR. Personally, it's best to keep your mom happy so you can talk about airsoft. And I'm a little curious that you don't seem to have much interest in handguns. When I was your age, I always liked short guns because they were easy to carry and hide.

First of all, a higher FPS does not mean a better , if you want to increase the FPS， just replacing a spring, and second ，you have an electronic trigger and your friend does not, you will be much more stable on a single shot than him.

I want to ask a question, there are some problems with the dust cover detent Pin, it seems to be stuck, how should I do, I have tried to use tweezers to clip, it doesn't work. It doesn't affect use, but... You know what I mean... Has anyone else had the same problem as me?