Sd96
-
Posts
50 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Sd96
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
2 viper taco pistol pouch double viper pistol pouch double blackhawk grenade pouch dump pouch glock kydex holster and belt attachment £15 plus postage and fees£15
- GB
-
Sorry just checked on this thread, I’ve went with the ++ as I got it for £44.99 comes Friday, as it’s a new pew I’ve looked inside seems fine had to shim it slightly but everything spot on, mainly looking for battery protection and precocking for that snappy semi, probably post results in case anyone is interested on Saturday. Thanks for the reply’s
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Harris style bi-pod, £10 pp and fees£10
- GB
-
I’ve got an E&l ak12, I’m toying with the idea of putting a Perun hybrid v3 in it but also looking at the cheaper Perun ab++ aswell, trigger contacts are a bitch and I know the hybrid will get rid of that so that’s a bonus as I’ve used them before on other builds but the ab++ will do the same job (ish) for cheaper and I could buy a micro switch to replace the contacts, I’m after some advice on what to buy for the build or if anyone has any recommendations ?
-
Can you improve the Tectonic Innovations Quake 8 Impact?
Sd96 replied to Tiercel's topic in General Help
😂 -
Can you improve the Tectonic Innovations Quake 8 Impact?
Sd96 replied to Tiercel's topic in General Help
A retractable key chain off amazon, so as when you throw it you can draw it back in like a fishing real, then go again -
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Theta optics comp m5 sight, £15 posted Harris style Bi-Pod £15 posted£15
- GB
-
Anyone know Mrchrissyb1984 in the real world?
Sd96 replied to peter207's topic in General Discussion
Think this is your guy, found on the dirty dog fb page
-
This advert is COMPLETED!
- For sale
- Used
Mordor tac Digi Flora summer set,5th layer style set, medium size, bought from grey shop few years back. Asking £40 plus postage£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
Helikon tex dangler pouch, black hawk grenade double pouch, double viper pistol pouch, large ranger green dump pouch. £25 plus postage£25
- GB
-
This advert is COMPLETED!
- For sale
- Used
Idogear ranger green tactical belt £20 pp£20
- GB
-
This advert is COMPLETED!
- For sale
- Used
Viper VX Buckle Up Multi Weapon System Full Set RIG plate carrier in ranger green, comes with 5 extra smg extended mag pouches, blue force gear quad smg mag pouch, backpack, triple ar/Ak- pistol pouch, recce style pouch with inserts for smg and at/Ak, dangler pouch. All things are attachable and detachable to suit your play style. Asking £50 plus post last time it goes down, needs to go£50
- GB
-
A while ago at a airsoft site near me,I found 2 used 6 bang training device grenades probably from some police or military training, my original plan was to keep them as paper weights as they are inert, my thoughts then went to, how easy it would be to make them useful again and looking at the mechanism I fiddled on with re drilling the old primer and fuse out and tried a new primer and what was basically useless. I then looked at my bfg (dynatex dominator) to understand how it worked and then the plan changed. To make them into a blank firing grenade, I drew a mock up for a bolt/ firing pin with basically a ball on the end for the impact part. I went to my local hardware store for some bits and cost £4.50, got to work assembling and drilling a whole for the safety pin to go all the way through so the firing pin can not touch the 209 primer even when dropped, firing only occurs when safety is pulled out and grenade is thrown to the ground where it’s hits the rubbed door stop connected to the firing pin and thus detonating.
-
This advert is COMPLETED!
- For sale
- Used
Umarex gbb mp7 magazines. 4 there at £35each£35
- GB
-
This advert is COMPLETED!
- For sale
- Used
Umarex/vfc mp7, has 8 gas tight mags, clone aimpoint red dot sight, qd supressor (shortened), torch and pressure pad, has new rubber and bucking. Shooting 290 on .28s depends on weather and gas, have been using ultra and red during winter times,Will come in original box. NOW £250 PLUS POST WITH 4 MAGS OTHER 4 MAGS WILL BE SOLD SEPARATELY UNLESS SOLD IN COMPLETE PACKAGE, AT £50 pm£250
- GB
-
I have one I might sell, gen 2 umarex/vfc mp7. Comes with 8 gas tight mags, aimpoint red dot sight and torch. I’m asking £550
-
This advert is COMPLETED!
- For sale
- Used
Both Viper rigs all straps and inserts there £15 pp kydex glock holster £5 pp viper extended mag pouches £10pp£5
- GB
-
This advert is COMPLETED!
- For sale
- As new
Fma maritime helmet, never fielded comes with all pads and cover £35 plus postage£35
- GB
-
This advert is COMPLETED!
- For sale
- As new
FMA FAST Ballistic Helmet Replica w/Velcro, Large, Ranger Green, bought and never fielded all pads and helmet cover included £40 plus postage£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
Helikon mini chest rig, missing dangler pouch because I’m using it, inserts and everything else there, £20 pp£20
- GB
-
https://www.fire-support.co.uk/product/ec-m16a1-qd-aeg-receiver-m4a1-colt-markingsgrey-version -
This advert is COMPLETED!
- For sale
- Used
Up for reluctant sale I have my CZ Bren 805A1. It’s an absolutely lovely thing, but I very rarely get the chance to use it anymore, so it needs go to a better home. This is the newer version (2020) with Mosfet. Has a Perun v3 mosfet set to semi only skirmished 2-3 times and has been nothing but reliable. firing at around 280fps on .28 last skirmished, around 330 with .20. Has quick change spring system. Has a few marks from skirmishing. The stock will not lock in folded position, but still folds. It has been repaired and painted, but it will now not lock in folded position. Will still lock and is solid in normal stock position. Has been fitted with 3D printed rail adapters for front side rails, makes the gun less front heavy. Only other upgrade is a flat hop (Prommy rubber and Firefly Nub) and an asg infinity 3500 motor Will come with: Hw holographic sight and cover Original metal side rails Original magwell and hi cap Original flash hider Noveske Sound Hog (clone) Magpul Grip (clone) Genuine SA80 sling M4 magwell 6x KWA MS120 midcap mags, all fitted with Magpul bases (original base plates included) Will be sent in original box with manual. £300 posted text me 07158284041£250
Newcastle
-
This advert is COMPLETED!
- For sale
- Used
Asg Bren 805, Perun mosfet,6 mags 7 including the high cap And adaptor, holo sight ect umarex gbb mp7, 8 gas tight mags, t1 sight, surefire clone torch, peq We glock 19, 2 gas tight mags, torch ect Bfg dominator asg storm 360 grenade viper buckle up plate carrier with all the pouches ect helikon mini chest rig basically everything you see here including the misc stuff like speed loaders, pouches, holsters, belts, torches, hop rubbers, riser, base plates for mags, fma helmet setup with comtacs helmet cover ect, idogear belt set up with lots of pouches,delta mike face pro, revision sawfly with multi lenses, other eye pro mesh ect, dump pouch, safariland glock holster and drop leg, just everything here buyer pays postage£650
Newcastle - GB
-
This advert is COMPLETED!
- For sale
- Used
E&C XM177 build 6 mags 1 high 5 mids, torch pistol grip and sight and rail all included, new mosfet just opened can be fitted just haven’t got the time to do it £180£180
